Alpha Networks CS5062 Inastallation guide

AlphaNetworks

H.264/MJPEG11nWirelessNetworkCamera

CS‐5062



Starting the IP Camera with IPCam Wizard

1. Click the IP Cam Wizard and follow the on-screen steps to continue the installation.

2. Connect an RJ-45 cable from a switch/router to the Ehternet port on the back of the camera and connect the
AC power adapter to the camera. Click

to continue, and to exit the wizard.

3. This window displays the avaible cameras (ex: CS-3152). Select the camera you wish to configure. Click
re-scan the available camera. Click

exit the wizard.
For CS-3152, the default IP address of AP mode is 10.30.30.1.

to see the camera’s live video display. Click Click to continue, or to

to

4. Login to your camera by entering the ID and Password. The original default password of the camera is

“admin”. Click

to go back to the previous step, to continue, or to exit the wizard.

5. This window is for reset the password. Tick the Change Password check box to enter the new password.

Click

to go back to the previous step, to continue, or to exit the wizard.

6. Enter a name for the camera in the Camera Name field. The name will be used to identify your camera o n the

network. Enter the correct time for the camera for the time zone it is in. If your camera is in the same time
zone as the computer you are using, click the

go back to the previous step,

to continue, or to exit the wizard.

icon to copy the computer’s time to the camera. Click to

7. Select a connection option:

For CS-3152 user, please select the option DHCP or Fixed IP.