Version: 15.11.2019
We assume no responsibility for any typing errors.
Alphacool International GmbH, Marienberger Strasse 1, 38122 Braunschweig Tel: (+49)0531 288 740 Supportmail: info@alphacool.com
Artikeltext
The Alphacool Ultra so Eisschicht is the next step in terms of thermal pads. Due to their outstanding
properes, they can almost be compared directly to thermal paste. This is because the Ultra So
Eisschicht moulds itself and clings much beer to components, which contributes to excellent cooling performance.
Beer than standard thermal pads?
The material of the Ultra So thermal pads acts similar to a thermal paste. While normal thermal pads are
only pressed together by the contact pressure there can be areas that are uneven due to dierent high
components, making them less eecve. With the ultra so Eisschicht this problem doesn’t exist because
the material distributes itself similar to thermal paste and thus prevents the highest components from
being subjected to increased contact pressure by the cooler. As standard thermal pads are quite s they
can also cause too much pressure on components. In the worst cases, this can cause the PCB to bend and
even break. Due to the so consistency of the Ultra So Eisschicht any excess material can spread out rather than cause problems. The Ultra So Eisschicht is not only performance orientated, but also safer!
But this is not the only advantage!
Moreover, the special material cannot dry out. Usually the silicone in thermal pads bleeds out over me.
This makes them hard and the performance of the pads drops rapidly from a certain point. This is not the
case with the Ultra So Eisschicht. They can be used over a much longer period of me without signicantly losing performance.
A thermal pad with fabric?
The consistency of the heat conducng material is similar to a viscous heat conducng paste. A special
fabric is embedded so that the material remains stable and can be used as a thermal pad. This ensures a
perfect distribuon of the material if the element to be cooled has an uneven shape. Examples include
voltage transformers, VRam and similar electronic components of all kinds that require cooling.
Cung? No problem!
To cut the thermal pads to size, you should denitely leave the foil on the pads. So the pads can easily be
cut to size with a pair of scissors. This is just as easy as cung paper. The cut edges remain perfectly clean
and do not fray.
The Alphacool Eisschicht Ultra So Thermal Pads are superior to the usual thermal pads in many respects
and are also used with all new Eisblock Aurora graphic cards coolers from Alphacool.