Alphacool Aurora GPX SLI User Manual

Version: 17.01.2020

We assume no responsibility for any typing errors.

Alphacool International GmbH, Marienberger Strasse 1, 38122 Braunschweig Tel: [phone] Supportmail: [e-mail]

What is it?

Alphacool Aurora GPX SLI Connector

Dual X4 - Plexi - Digital RGB

Highlights

With the Alphacool Aurora GPX SLI Connector Dual, the water circulation of two Alphacool Aurora
graphics card coolers can be combined. The Alphacool Aurora GPX SLI Connector Dual replaces the ter­minals of the graphics card coolers. This means that short hoses or hardtubes with narrow bending radi­uses can be avoided. It is made of plexi and is equipped with extensive digitally addressable RGB LED
lighting.

• Digital addressable RGB LED lighting

• Replaces the terminal from the graphics card cooler

• Made of crystal clear Plexi

Version: 17.01.2020

We assume no responsibility for any typing errors.

Alphacool International GmbH, Marienberger Strasse 1, 38122 Braunschweig Tel: [phone] Supportmail: [e-mail]

Technical data cooler

W x T x H 87 x 121 x 30 mm

Net weight 283 g

Max working temperature 60 °C

Material Plexi

Threads 2 x G1/4“ (1 x IN, 1 x OUT)

Connector Digital RGB 3-Pin 5V

Certificates CE, FC, ROHS

Scope of delivery

6 pcs. M4x35 Schrauben

4 pcs. O-Ring

1 pcs. Digital RGB Adapter 4-1-Pin 5V

Version: 17.01.2020

We assume no responsibility for any typing errors.

Alphacool International GmbH, Marienberger Strasse 1, 38122 Braunschweig Tel: [phone] Supportmail: [e-mail]

Other data

Article number Alphacool 12954

EAN Code 4250197129541

PU Box 1

Dimensions PU B x T x H 20,5 x 13 x 5 cm

Weight 427 g

Customs code 84199085900

Product pics download

https://www.alphacool.com/download/1017341_pics.zip

Article text

What do I need the Alphacool Aurora SLI Connector Dual for?

The Alphacool Aurora SLI Connector Dual is designed for connecting two Alphacool Eislock Aurora
graphics card coolers. If you want to connect two GPU coolers in a loop, connecting them via tubing can
be problematic due to the tight space. Hard tubes are very difficult to get into the right shape and hoses

can bend. Here the Alphacool Aurora SLI Connector Dual offers help. The connection terminals of the

graphics card coolers are replaced, and you only have a common inlet and outlet for both cooling blocks.

What Do I Need to Pay Attention To?

We offer the Alphacool Aurora SLI Connector Dual in two versions. Depending on the installation con­figuration, either one or two PCIE slots are available between the two graphics cards. For installation
configurations in which the graphics cards are installed in the first and third slot, the Alphacool Aurora SLI
Connector Dual X3 is required. If the graphics cards are installed in the first and fourth slot, the Alpha-

cool Aurora SLI Connector Dual X4 fits.

Does It Have Other Features?

The Alphacool Aurora SLI Connector Dual was specially developed for use with Alphacool Eisblock Au-

rora graphics card coolers. It consists of Plexi and is equipped with addressable digital RGB LEDs These
are very bright and give you the freedom to light up your system according to your mood or your own
ideas. The SLI Connector has a pass-through to integrate additional Digital RGB LEDs into the system,
allowing you to connect additional Digital RGB LED products without an additional controller. The de­sign follows the Alphacool Aurora design which you can see in many of our other products. The con-

nectors have, as usual, G1/4" thread and are therefore compatible with our other products.

Manual PDF

https://www.alphacool.com/download/Aurora_SLI­Connector_manual.pdf

Version: 17.01.2020

We assume no responsibility for any typing errors.

Alphacool International GmbH, Marienberger Strasse 1, 38122 Braunschweig Tel: [phone] Supportmail: [e-mail]

How Much Space Do I Need in My Case?

Since the Alphacool Aurora SLI Connector Dual replaces the connection terminals of our Eisblock Auro-

ra graphics card coolers, the depth of the cooling unit increases only very slightly. This means: If a

graphics card with Alphacool Eisblock Aurora cooler fits in your, it should fit with the Alphacool Aurora
SLI Connector Dual.

How Is the Alphacool Aurora SLI Connector Dual Mounted?

The installation of the Alphacool Aurora SLI Connector Dual is very easy. The connection terminals of
the graphics card coolers are unscrewed, O-rings are inserted into the SLI Connector and then the SLI

Connector is screwed to the graphics card coolers.