WSD505 Wireless Smoke Detector (AEC200 Series)
Product Specification Sheet
APS1088
Rev. 12 /20 17
FEAT UR ES
Fully  supervised  wireless  900MHz 
frequency EchoStream® transmitter 
Low profile design 
Maintenance warning 
Operates on two (2) field-replaceable, 3V 
lithium batteries (model BA505) 
Low Battery signal at 2.7V (checks every 
130 minutes) 
60 Minute check-in time frequency 
Automatic drift compensation
WSD505 W IRE LESS SMO KE DET EC T OR (AEC 200
SERIES)
The Alpha Communications® WSD505 W ireless Smoke Detector 
is for us e with the AlphaEcall™ 200 series (AlphaECall200) 
Wireless Emergency Call System. 
Th e W SD505 is built upon photoelectric ESL technology, that 
continually monitors its own sensitivity and operational status. 
The detector provides drift compensation and visual display of 
over- or under sensitivity so that corrective action can be taken 
to reduce false alarms. Wireless frequency hopping technology 
maximizes range and reliability. The W SD505 is powered by two 
(2) included 3V Lithium batteries, and battery life is estimated at 
up to five (5) years, reducing the inconvenience and cost of 
replacing batteries. The WSD505 Wireless Smoke Detector 
features a low profile design and blends in with any decor.
SPECIFIC AT IO NS
Dimensions:
Diameter: 5.30" (135mm) 
Depth: 2.63" (67mm)
Weight: 9.9 oz. (with batteries)
Power:
Two (3) 3V Lithium batteries (included) low 
battery signal at 2.7V
Battery Life: 3-5 years (typical, non-condensing)
Environment:
0°C to 50°C (32°F to 120°F); up to 95% 
relative humidity
Alarm 
Sounder:
85 dB @ 3m - temporal output
REQUIRED COMPO NENT S
AlphaEcall™ 200 series W ireless Emergency Call System
AR C HIT E C T S' AND ENGINE ER S' SP EC IFICAT IONS
The wireless Smoke Detector(s) shall be Alpha Communications® WSD505 or approved equal. It shall use the 900 
MHz frequency for signal transmission, and shall monitor its own sensitivity and operational status. No physical 
wiring connections shall be required to transmit an alarm call. Two (2) 3V lithium batteries shall be included. The 
transmitter shall be no larger than 5.50" diameter x 2.63" deep.
Alpha Communications® has designed the AlphaEcall™ 200 (AlphaECall200) Series to work as a fully integrated 
system. Its AEC200DM Master Station has been carefully designed and matched to work with AlphaEcall™ AEC200 
wireless and wired peripherals. Alpha Communications® will not warrant or support components of AlphaEcall™ 
AEC200 that are purchased separately unless the components are add-ons to previously sold systems. Alpha 
Communications® will also not warrant or support a system that is a mix of Alpha Communications® and Non-Alpha 
Communications® parts , unless prior written permission has been obtained. In order to track our s ystems and to 
inform facilities of software upgrades, full site information (site name, address and phone number) will be required 
when ordering. Site information and AEC200DM warranty number will also be required when requesting technical 
support.