Alpha WPT535S Specsheet

Product Specification Sheet APS1038 - Rev. 12/2016

WPT535S Wireless Pendant TransmitterWPT535S Wireless Pendant Transmitter

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

WPT535S Wireless Pendant TransmitterWPT535S Wireless Pendant Transmitter

FeaturesFeatures

Fully supervised wireless 900MHz
transmitter
Large act ivation button
Low battery warning before battery
depletion
LED for c all assurance
Field-replaceable, 3V lithium batt ery

WPT535S Wireless Pendant TransmitterWPT535S Wireless Pendant Transmitter

The Alpha Communicat ions® WPT535S Single Ondition Wireless Pendant Transmitter
features the great range and reliability of 900 MHz in a small package.

This pendant has a smart design with simple, single button act ivation. LED flashes on all
transmissions, including supervision, so the user is reassured the unit is operating.

The WPT535S c omes with a belt clip that c an be converted to a belt loop. It c an also be
easily mounted for fixed-position signaling

The WPT535S features a fully supervised RF link to ensure reliability. The built- in LED
flashes with all transmissions, including supervision, so the user c an see the transmitter is
still functioning. The battery is a field-replaceable long-life 3V lithium type, and is included.

SpecificationsSpecifications

Dimensions:

Height: 3.0" (77mm)
Width: 1.6" (41mm)
Depth: 1.0" (26mm)

Power: One 3V Lithium bat tery (included)

Battery Life: 3-5 years at 5 activations/day

Range: 1 mile, open field (range can be limited by AlphaEntry™ soft ware)

Environment: 0 degrees C to 60 degrees C (32 degrees F t o 140 degrees F)

Required ComponentsRequired Components

AlphaEcall (200 Series) or AlphaEntry (v5.5 or later) Wireless Emergency Call Systems

Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications

The wireless pendant transmitt er(s) shall be Alpha Communications® WPT 535S or approved equal. It shall use the 900 MHz frequency for
signal transmission, and shall include a transmission indicator LED. No physical wiring connect ions shall be required to transmit a call. When
activated, the WPT535S pendant shall send a signal which c an t rigger a relay ac tivation or other system funct ion(s). The WPT535S shall
also include a belt loop and a 3V lithium bat tery. The transmit ter shall be no larger than 1.6" x 3.0" x 1.0".

Alpha Communicat ions® has designed the AlphaEcall 200 series and AlphaEntry (v5.5 or later) to work as a system. The Master St ations
have been carefully designed and matc hed t o work with t hese wireless and wired peripherals. Alpha Communications® will not warrant or
support components for these systems that are purchased separately unless the components are add- ons to previously sold systems. Alpha
Communications® will also not warrant or support a syst em that is a mix of Alpha Communications® and Non-Alpha Communications® parts,
unless prior written permission has been obt ained. In order to track our syst ems and t o inform fac ilities of soft ware upgrades, full site
information (site name, address and phone number) will be required when ordering. Site informat ion and WNC510 warranty number will also
be required when requesting tec hnical support.