Alpha WES555 Specsheet

Product Specification Sheet APS1021 - Rev. 05/2017

WES555 Emergency Pull/Push Station (AlphaEcall™ 200 series)WES555 Emergency Pull/Push Station (AlphaEcall™ 200 series)

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications

The Wireless Emergency Push/Pull Stations shall be shall be Alpha
Communications® AlphaEcall™ 200 series model WES555, or
approved equal. Operation of emergency signals shall be
accomplished by a short pull on the nylon cord or by pulling /
pushing down on t he Red lever marked 'EMERGENCY".

The Red "CALL PLACED" L.E.D. indicator shall light to assure the
resident that t he c all has been placed. Switc hing mechanism shall
consist of a reliable DPDT switc h. T he WES555 shall be used in
conjunct ion with t he WSM555 wireless support module.

When used with a "chec k-in" pushbutton such as t he SF113, t he

WSM555 needs to be replaced with the WSM555-2 dual input

version.

The WES555 is typically used as a toilet emergency pull station
and is not designed to be used in wet or damp environments. For
wet or damp (or shower) type applicat ions use the model#

WES537 station instead.

All electronic components needed for these feat ures shall be
mounted on a printed circuit board and all station components
shall be mounted an a rugged ABS plastic fac eplate. The station(s)
shall be installed in a single gang ring with square box. Plug-in
connectors shall be provided for connec tions.

Contractor shall observe all local and national electrical and
building codes.

WES555 Emergency Pull/Push StationWES555 Emergency Pull/Push Station

The Alpha Communicat ions® WES555 Emergency Station may be
used in any location where ac tivation of an emergency signal is
required. All electronic components are mounted on a circuit board.
The WES555 features a built- in Red LED 'call-placed' indicator, and
6 foot nylon pull cord.

Due t o the flexibility of its design, it may be used as a PULL CORD
EMERGENCY STATION, OR a PUSH TYPE EMERGENCY STATION. The
pull cord supplied may be used for emergency c all act ivation or if
so desired, the LARGE RED push/pull down lever may be used.

The WES555 is used primarily with t he WES555 Wireless Support
Module on the AlphaEcall™ 200 series wireless emergency-c all
system(s), but can be used and is backwards compatible with
some older systems as well, as well as the AlphaEntry™ series
(v5.5 or later).

FeaturesFeatures

Simple and flexible operation.
RED L.E.D. "Called Placed" indicator
Call cancel only at point of origin.
Flame Retardant t ype ABS White Plastic Fac eplate
Can be used as a Pull or Push type station

SpecificationsSpecifications

Dimensions:

Height: 4.50" (114mm)
Width: 2.75" (69mm)
Depth: 1.75" (44mm)
Projects: 0.44" (11mm) from mounting surface
(less IH527 back box)

Mounting:

Surface mounts (along with the WSM555 support
module) using the IH527 surface back box

Construction:

Flame retardant type ABS plastic
fac eplate. Switc hes and electronic components
are circuit board mounted.

Connections: Plug-in connec tors.

Required ComponentsRequired Components

AlphaEcall™ 200 Master Station(s) and system components

WSM555 Plug-in Wireless Support Module

Optional ComponentsOptional Components

IH527 Surface (White) plastic bac k box
CA016K Thermoplastic Polyurethane (TPU) plastic pull cord

sets