Alpha VV100DX, VV100D Specsheet

Product Specification Sheet APS648 - Rev. 07/2013

VV100D Input Board for VVDTMF BoardVV100D Input Board for VVDTMF Board

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

Architects' And Engineers'Architects' And Engineers'

SpecificationsSpecifications

The DTMF Input Board(s) shall be
Allpha Communications® VV100D or equivalent.
The VV100D shall be used to provide a filtered
telephone line input to the model VVDTMF board.

The cont ract or shall also furnish and install the
required 12VDC power supply (model SS12P or
equivalent).

All wiring to relay shall be low-voltage Class II
wiring, installed as per all federal, state, and
local elec trical and building codes.

VV100D DTMF Input BoardVV100D DTMF Input Board

The Alpha Communications® VV100D DTMF Input Boards are used for a variety of
applications. T he primary use is for providing a filtered t elephone line input t o t he
model VVDTMF board. The VV100D is powered from a separate 12VDC plug-in power
supply (model SS12P or equivalent).

The VV100D boards are designed to easily surface mount right onto the finished
wall by using the mounting holes provided for screw mounting, along with the
provided plastic st and-offs.

Connect ions are positive sc rew t erminal and plug-in type.

FeaturesFeatures

Easily Installs Right on Finished Wall Surfac e
Operates on Safe Low- Voltage Class II Wiring
Convenient Sc rew Terminal and Plug-in Connect ions

SpecificationsSpecifications

Dimensions: 3.25"W (83mm) x 1.80"H (46mm) x .75"D (20mm).

Connections: Screw Terminal and Plug-in Connectors

Power Required: 12VDC, provided by the model SS12P plug-in power supply.