Alpha VI644S04, VI644S08, VI644S03, VI644S02, VI642S01 Specsheet

Product Specification Sheet A PS471 - Rev. 11/2013

VI642 V.I.P.™ Series Stainless Steel Economy Style Lobby Panels

42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]

TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]

Copyright© 1998-201 4 Alpha Communications® - All Rights Reserved.

Due to co ntinuous pro duct improvement, all colo rs, sizes, materials, finishes and specification s are subject to ch ange without n otice.

< Previous (APS470) Next (APS472) >

VI642 S10

10 Bu tton Su rfa ce Pa n el

VI642/ 04

4 Butto n Flu sh P an el

Architects' And Engineers'

Specifications

The entry panel unit(s) shall be Alpha
Communications® VI642 V.I.P.™ series, or
approved equal. Panel(s) shall be (flush or
surface) mount t ype. Panel(s) shall include a
45-ohm mylar loudspeaker. Panel(s) shall have
solid-metal push-buttons, permanently
engraved (and filled) apt. markings and
mesh speaker grille to protec t the speaker
components. Panel shall be made of a single
sheet of 16 gauge high carbon stainless steel.
Panels with 2 or more buttons are engraved 1­x inclusive (x=number of buttons on t he
panel).

Flush VI642 panels shall be made completely
flat, and surface VI642 panels shall be made
with 1.50" (39mm) side return bends and open
in the bac k. A 'Star' head screwdriver tip shall
be provided with eac h panel for installation /
removal.

VI642 V.I.P.™ Series Economy Stainless Steel Lobby Panels

The Alpha Communicat ions® VI642 V.I.P.™ series Stainless Steel (Vandal-Resistant)
lobby panels are rugged, good-looking panels for indoor or outdoor use, and are our
lowest cost St ainless Steel panels, made in stoc k configurations, for 1 to 12 push
buttons.

Made of heavy 16 gauge high-c arbon stainless steel, the VI642 series is made t o take
abuse. VI642 panels are made in 'stoc k' sizes, and are available in flush or surface
mount st yles. Flush VI642 panels are made completely flat and include a
galvanized steel flush back box, and surface VI642 panels are made with 1.50" (39mm)
side return bends and are open in the back, and include a 'C' type galvanized st eel wall
mounting bracket.

All VI642 panels feat ure solid metal push-butt ons and engraved apt . markings (right
onto t he fac e of the panel). The use of 'Star' head screws makes it nearly impossible
to tamper with the panel without the use of the special screwdriver tool.

All VI642 surface panels are a c ompac t 4.25" wide (108mm) and all VI642 flush panels
are a c ompac t 5.00" wide (127mm) and both are available in 1,2,3,4,6,8,10 or 12
button versions. Panels with 2 or more buttons are engraved 1-x inclusive (x=number
of buttons on t he panel). Because of t he low-cost 'stock' nature of t hese panels, t hey
are not available in c ustom sizes or configurations, with custom engraving, building
name/address engraving or alphabetical directories. For custom configurations or
special Stainless Steel panel requirements, we suggest our VI402 (cust om) V.I.P.™
series panels.

Features

Our LOWEST COST St ocked Stainless Steel Panels!
Heavy 16 Gauge High-Carbon Stainless Steel Fac eplate
Solid Met al Pushbuttons with Permanent Engravings
Panels are available in Flush or Surfac e Mount styles
Rugged, Good-Looking and Vandal-Resistant
Works with a variety of apartment intercom stations
Tamper-Resistant 'Star' Head Screws Used

Specifications

Dimensions:

WIDTH: Surfac e; 4.25" (108mm), Flush; 5.00" (127mm).
HEIGHT depends upon individual panel configuration.
Contac t our Sales Dept. for more information.

Construction: Heavy 16 Gauge High-Carbon Stainless Steel fac eplate.

Tool Required:

'Star' head sc rewdriver t ip required for panel
installation/removal, included with each VI642 V.I.P.™
panel ordered.