Alpha VI404S192D, VI404S195D, VI404S198D, VI404S201D, VI404S204D Specsheet

Product Specification Sheet APS325 - Rev. 08/2013

VI404 V.I.P.™ Series Polished Brass Lobby PanelsVI404 V.I.P.™ Series Polished Brass Lobby Panels

387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone] CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: [phone] • Fax: [phone]

Web: www.canalalarm.comWeb: www.canalalarm.com

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

SpecificationsSpecifications

Dimensions:

Depends upon individual panel configuration.
Contac t our Sales Dept. for more information.

Construction:

Heavy .065 Gauge High-Quality Solid Polished
Brass faceplate with Polycarbonate directory
window.

Tool Required:

'Star' head sc rewdriver tip required for
panel installation/removal and direct ory name
insertion and maintenance, included with
each VI404 V.I.P.™ panel ordered.

VI404 V.I.P.™ Series Polished Brass LobbyVI404 V.I.P.™ Series Polished Brass Lobby

PanelsPanels

The Alpha Communicat ions® VI404 V.I.P.™ Solid Polished Brass
lobby panels are rugged, good-looking panels for indoor or outdoor
use. An opt ional lacquer finish is available for heavy weat her or
heavy use environments.

Made of heavy .065 gauge high-quality solid brass, t he

VI404 series is made to look great. VI404 panels are all custom-

made to your exact size and layout spec ifications and are available
in flush or surface mount styles. Flush VI404 panels can be
made completely flat, with a slight bevel on t he edges or a 1/2"
returned edge (please specify when ordering). Other options for
the VI404 series include postal release switc h (PO402I) built- in,
built- in or separate matc hing stainless steel alphabetical
directories, builtin B&W CCD camera (CCDCAM-I), built-in COLOR
CCD c amera (CCDCAM-CI), and a host of optional
speaker/microphone and handset options.

All VI404 panels feature solid metal push-butt ons, engraved
apt. markings (right ont o the fac e of the panel), and building
name/number engraving at the t op of the panel (where space
allows). The use of 'Star' head sc rews makes it nearly impossible
to remove the panel or directory without the use of the
special screwdriver tool.

FeaturesFeatures

Heavy .065 Gauge High-Quality Solid Brass Fac eplate
Solid Metal Pushbuttons with Permanent Engravings
Panel can be made Flush or Surfac e Mounted
Names are Protec ted by a Thick Polycarbonate Window
Rugged and Good-Looking... Polished Finish
Wide Variety of Speaker/Microphone components available
Works with a variety of apartment intercom and
videointercom entry panels
Tamper-Resistant 'Star' Head Sc rews Used

Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications

The entry panel unit(s) shall be Alpha Communications® VI404 V.I.P.™ series, or approved equal. Panel(s) shall be (flush/surface) mount
type. Panel(s) shall include the proper speaker components t o match the apt. intercom stations. Panel(s) shall have (built-in/separate/no)
directory units. Where supplied, direct ory unit(s) shall be made of heavy gauge polished brass, with t he name strips protected by a sheet of
clear Polyc arbonate. Name insertion and maintenanc e shall require the use of a 'Star' head type screwdriver tool. Cont ract or shall provide
two (2) sc rewdrivers (per building), to the building management (or superintendent), for future directory name maintenance. Panel(s) shall
have solid-metal pushbuttons, permanently engraved (and filled) apt. markings and mesh speaker grille to protec t the speaker components.
Panel shall be made of a single sheet of .065 gauge high-quality solid polished brass.