Alpha UPG1, UPG2, UPG3, UPG4-2, UPG4 Specsheet

Product Specification Sheet A PS522 - Rev. 07/2013

UPG Series Flush Housings (For modular door stations)

42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]

TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]

Copyright© 1998-201 4 Alpha Communications® - All Rights Reserved.

Due to co ntinuous pro duct improvement, all colo rs, sizes, materials, finishes and specification s are subject to ch ange without n otice.

< Previous (APS521) Next (APS523) >

UPG1 (shown)

UPG6/2 (shown)

UPG Series Flush Housings for Modular Series Door

Stations

The UPG flush plastic housings are designed to be used with the
Alpha Communications® / S.T.R.™ modular series door entry
stat ions and syst em annunciators. There are seven (7)
configurations available in single and double width varieties. T he

UPG housings are designed to be used in conjunction with t he MT

series Modular Frame(s). For larger configurations, multiple

UPG housings and MT frames may be 'ganged' together.

The UPG housings have snap-in st and-offs to allow mounting of
the individual modular snap-in c omponent's PC boards, for easy
and neat system wiring.

See c hart below for reference of sizes/types and configurations
available

CONFIGURATIONS AVAILABLE

Model# # of Modules Height Width Depth**

UPG1* 1W x 1H 4.40" 4.40" 1.58"

UPG2* 1W x 2H 8.35" 4.40" 1.58"

UPG3* 1W x 3H 12.28" 4.40" 1.58"

UPG4* 1W x 4H 16.22" 4.40" 1.58"

UPG4/2* 2W x 2H 8.35" 8.35" 1.58"

UPG6/2* 2W x 3H 12.28" 8.35" 1.58"

UPG8/2* 2W x 4H 16.22" 8.35" 1.58"

*Titanium (suffix-T), White (suffix-W) or Brown (suffix- B).

**Depth indicates size from front to bac k of frame only, not

including the APG series housing and/or snap-in module(s)

included.

Architects' And Engineers' Specifications

Flush plastic housing(s) shall be Alpha Communicat ions® / S.T.R.™ UPG series or approved equal. Flush housing(s) shall be modular type and
shall be used in conjunct ion with the proper MT series modular panel frame(s). The UPG plastic housing(s) shall contain built- in stand- offs to
to allow mounting of the individual modular snap-in component's PC boards, for easy and neat syst em wiring.

UPG housing(s) shall be made of durable plastic, and shall flush mount into the finished wall.

Contract or shall observe all local and national electrical and building codes.