Alpha UMV1000 Specsheet

Product Specification Sheet APS976 - Rev. 01/2016

UMV1000 QwikBUS™ Video-Intercom Flush HousingUMV1000 QwikBUS™ Video-Intercom Flush Housing

42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone] Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]

TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]

Copyright © 1998-2 016 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

UMV1000 UMV1000 Flush HousingFlush Housing

HWB Installation Screws and Mounting BracketsHWB Installation Screws and Mounting Brackets

UMV1000 QwikBUS™ Video-Intercom FlushUMV1000 QwikBUS™ Video-Intercom Flush

HousingHousing

The Alpha Communicat ions® / S.T .R.™ UMV1000 Flush
Video-Intercom Housings are designed to be used with the

VFS1000 series, VFSE1000 series, VFS1500 series and VFSE1500

series QwikBUS™ intercom stations, to allow t he st ations to
be mounted flush into the finished wall.

These plastic housings are used in conjunct ion with the model HWB
mounting screws and brackets, typically for a sheet- rock or
gypsum type wall. Depending on the mounting location, these flush
housings may also be fastened directly t o a wooden or metallic
wall stud.

FeaturesFeatures

Made from high-impact ABS plastic
Can work with a variety of QwikBUS™ Interc om Stations

SpecificationsSpecifications

Dimensions:

The UMV1000 flush housings are

5.15"W (131mm) x 8.30"H (211mm) x

1.80"D (46mm).

Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications

The Flush Video-Intercom Housings shall be Alpha
Communications® / S.T.R.™ model UMV1000 or exact equal. The
Flush Intercom Housings are designed to be used with the

VFS1000 series, VFSE1000 series, VFS1500 series and VFSE1500

series series QwikBUS™ video-intercom monitor stations, to allow
the stat ions to be mounted flush into the finished wall.
The UMV1000 shall be made from high-impact ABS plastic.

Contractor shall also furnish and install the model HWB mounting
screws and brackets, t ypically for a sheet-rock or gypsum type
wall. Depending on the mounting location, t hese flush housings
may also be fastened directly to a wooden or metallic wall stud, as
directed by the Architec t .

Contractor shall observe all local and national electrical
and building codes.