Alpha EMVDB1B, EMVDB1T, EMVDB1W Specsheet

Product Specification Sheet A PS553 - Rev. 07/2013

EMVDB1 Series Vandal-Resistant Keypad Modules (For modular door stations)

42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]

TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]

Copyright© 1998-201 4 Alpha Communications® - All Rights Reserved.

Due to co ntinuous pro duct improvement, all colo rs, sizes, materials, finishes and specification s are subject to ch ange without n otice.

< Previous (APS552) Next (APS554) >

EMVD B1T (shown in Tita nium)

EMVDB1 Series Vandal-Resistant Keypad Module for Modular Series

Door Stations

The EMVDB1 series vandal-resistant keypad modules are designed to be used with
Alpha Communications® / S.T.R.™ modular series door entry stat ions. When used in
conjunction with t he DB1 series display module, the EMVDB1 enables a building visitor
to easily find and dial an apartment code number.

All EMVDB1 keypad modules feature 4mm thick machined aluminum faceplates,
metal buttons and plug-in connector for easy wiring.

Each system utilizing the EMVDB1 keypad module requires a model BRA receiver
board, model BRK16 16-station selector relay(s) and the associates NTR211 and

NTR201 power supplies.

All EMVDB1 keypad modules and are available in three (3) finishes; Titanium (suffix-
T), White (suffix-W) or Brown (suffix- B).

All EMVDB1 keypad modules are 3.94"w x 3.94"h (100mm x 100mm), and are made
to snap into the MT series modular panel trim frame(s).

To service the EMVDB1 series display modules, onc e installed, use the model 13510
key/tool unit.

Architects' And Engineers' Specifications

Vandal-resistant keypad module(s) shall be Alpha Communications® / S.T.R.™ EMVDB1 series or approved equal. Keypad module(s) shall
snap into t he corresponding MT series modular panel frame(s).

Keypad module(s) shall be finished in Titanium (suffix-T), White (suffix-W) or Brown (suffix-B), and shall feature 4mm t hick machined
aluminum fac eplate and plug-in connector for easy wiring. The EMVDB1 model shall be used in c onjunction with t he DB1 alphabetical display
module, BRA receiver board and BRK16 16-stat ion relay card(s), and assoc iated power supplies.

Contract or shall observe all local and national electrical and building codes.