Product Specification Sheet APS385 - Rev. 07/2013
DZ209/5 and DZ209/10 Diode Board UnitsDZ209/5 and DZ209/10 Diode Board Units
387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: 212-431-5066 • Fax: 212-431-5422387 CANAL STREET • NEW YORK • NY • 10013-1615 • Phone: 212-431-5066 • Fax: 212-431-5422
Web: www.canalalarm.comWeb: www.canalalarm.com
Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.
Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.
DZ209/5 / DZ209/10 Diode Board UnitsDZ209/5 / DZ209/10 Diode Board Units
The Alpha®/S.T.R.™ DZ209/5 and DZ209/10 diode board units are
designed to work with our HT2009 or HT3009 (2-wire) apartment
handset stat ions and/or 5661/000 (NoCoax) type video-intercom
systems.
The DZ209/5 diode boards are installed into the lobby ent ry door
stat ions, to enable standard pushbuttons t o be used with t he
HT2009, HT3009 and 5661/000 syst ems. The diode boards are
provided with self-stick tape to allow t hem to be mounted in a
convenient spot, inside the lobby ent ry panel(s).
The diode boards allow t he pushbutton selective wires to also act
as c ommon wires, when t he pushbuttons are not being depressed.
The DZ209/5 has 5 diodes and the DZ209/10 has 10 diodes, to
allow them to work with 5 buttons and 10 buttons, respect ively.
They can be mixed and matched in a panel, depending upon the
tot al number of buttons. For example, for a 35 button panel, you
would use 3- DZ209/10 boards and 1- DZ209/5 board.
FeaturesFeatures
Easy Installation
Comes with Self-St ick Mounting tabs
Positive Sc rew T erminal Connectors
DimensionsDimensions
DZ209/5 & DZ209/10:
1.75"W x 2.25"H x 0.60"D
(45mm) x (58mm) x (16mm)
(less self- stick mounting tabs)
Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications
The system diode board unit(s) shall be Alpha Communicat ions®
/ S.T .R.™ DZ209/5 and/or DZ209/10 or approved equal.
The DZ209/5 and DZ209/10 shall be used with the HT2009 or
HT3009 (2-wire) handset intercoms, and/ or 5661/000 (NoCoax)
video-interc om monitors.
The diode boards shall be installed into t he lobby entry panel(s),
using the provided self-stick mounting tabs. Positive sc rew
terminals shall be used for all wiring connec tions.
Contractor shall observe all local and national electrical and
building codes.