Product Specification Sheet A PS368 - Rev. 07/2013
5556/004 Video Distributor Unit (5601/5651 Series)
42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: (631) 777-5500 • Fax: (631) 777-5599
TOLL-FREE: (800) 666-4800 • Web: AlphaCommunications.com • Email: info@alphacommunications.com
Copyright© 1998-201 4 Alpha Communications® - All Rights Reserved.
Elvox is a registered trademark of Paso Soun d Product s Inc.
Due to co ntinuous pro duct improvement, all colo rs, sizes, materials, finishes and specification s are subject to ch ange without n otice.
< Previous (APS367) Next (APS369) >
Architects' And Engineers'
Specifications
The video distributor unit(s) shall be
Alpha Communications® / Elvox™ model
5556/004, or approved equal, and shall provide
up to four (4) amplified video outputs for the
video-interc om system. The 5556/004 shall be
built into a rugged high impact ABS plastic c ase,
and shall be powered by t he syst em's DC power
supply.
Low voltage wiring shall be used and
positive sc rew terminal and coax clamp video
connectors shall be provided for installation
wiring. The 5556/004 shall be mountable right to
the surface of the wall or in a cust omer-supplied
junction box cabinet.
Contract or shall observe all local and national
elect rical and building codes.
5556/004 Video Distributor Unit
The Alpha Communicat ions® / Elvox 5556/004 video distributor unit is used with t he
5601 and 5651 series video-intercom systems. The 5556/004 is used when t he video
signal from t he lobby entry camera(s) must be split (distributed) to several coaxial
cables.
The 5556/004 gets its DC power from the system's power supply. All 5556/004
connections are positive sc rew terminal and coax clamp c onnect or type.
Each 5556/004 has four (4) video outputs. When multiple 5556/004's are used, for
systems requiring more than four (4) outputs, multiple 5556/004 units may be "daisy-
chained" to provide outputs in multiples of four (4).
Features
Easily Installs Right on Finished Wall Surface or in Optional Junction Box
Operates on Safe Low- Voltage Class II Wiring
Positive Sc rew Terminal and Coax Clamp Connectors
Provides 4 separate amplified video out puts
Can be "daisy-chained" when more t han 4 video outputs are needed
Specifications
Dimensions:
Height: 4.50" (115mm)
Width: 2.75" (70mm)
Depth: 2.50" (64mm) from mounting surfac e
Construction: High impac t ABS plastic case
Connections: Positive sc rew t erminal and coax clamp video connectors
Temperature
Range:
0-50 degrees C.
Mounting:
Surface- mounted (usually installed near t he syst em power supply
and other system central equipment)