Alpha 340-4E5, 340-4G5, 340-6G5 Specsheet

BELLS & BUZZERS

FEATURES

Adaptabel® AC
Vibrating Bells

PLC Compatible

340 Series

> Universal Adaptaplate mounts

directly on surface or electrical
box

> Weatherproof by adding

appropriate back box

> Completely assembled, all

hardware supplied

> Shockproof die cast housing

> Dustproof

AGENCY APPROVALS

> UL 464 Listed

> FM Listed

> CSFM Certified

SPECIFICATIONS

> Self-compensating solenoid

plunger

AC vibrating bells produce a long continuous ringing sound. The
striker continues to strike the gong in rapid-fire action as long as cur­rent is applied.

®

Universal Adaptaplate
single-gang box, 3 1/4" (83 mm), 3 1/2" (89 mm), or 4 " (102 mm)
octagon box, or any plaster cover with mounting holes on 2 3/4" (70
mm) centers. 6" and 10" bells also mount on 4" (102 mm) square
boxes.

Specified for timing, scheduling, paging and general alarm applica­tions. 4" (102 mm) sizes recommended for quiet office areas. 6" (152
mm) sizes for moderate noise level areas such as general factory ar­eas. 10" (254 mm) sizes for loud areas such as heavy machine shops.

Available with full cast grids and protective grilles. May be weather­proofed with the addition of a weatherproof box. See AdaptaBel Acces­sories on page 5-10 for available options.

mounts directly on surface or fits any

> Rated 400 hours at 50% duty

cycle

> Corrosion resistant heat flowed

epoxy finish

Distributed by:

Alpha Communications®

D-04

42 Central Drive ||||| Farmingdale NY 11735-1202

Ph: 631-777-5500 ||||| Fax: [phone]

5-6

www.AlphaCommunications.com

© Copyright 2004 Edwards

TECHNICAL INFORMATION

BELLS & BUZZERS

4" Bell

4 1/2"

(114 mm)

6" Bell

7 1/8"

(181 mm)

2 13/32"

(61 mm)

3 11/16"

(94 mm)

10 1/2"

(267 mm)

10" Bell

4 13/16"

(122 mm)

dB at DC Coil

Cat No.* Volts Amps VA 1m / 10 ft. Res (Ohms)

340-4E5 12 0.620 7.4 94 / 88 13
340-4FM 16 0.460 7.4 22
340-4G5 24 0.310 7.4 50
340-4N5 120 0.062 7.4 1300
340-4R5 240 0.031 7.4 5000

340-6E5 12 0.700 8.4 98 / 92 8
340-6FM 16 0.500 8.0 13
340-6G5 24 0.350 8.4 30
340-6N5 120 0.070 8.4 700
340-6R5 240 0.035 8.4 2650

340-10G5 24 0.350 8.4 102 / 96 30
340-10N5 120 0.070 8.4 700
340-10R5 240 0.350 8.4 2650

*Gong Size in inches denoted by suffix in catalog number.

SIGNAL INPUT LOAD CHARACTERISTICS**

Light Source Operating Max. off state Continuous on Surge (inrush/duration)
Cat. No. Voltage leakage current (mA) Current (mA) Amps/milliseconds

340-4N5 120V AC 60 Hz 25 62 0.095/4
340-6N5 120V AC 60 Hz 25 70 0.15/4
340-10N5 120V AC 60 Hz 25 70 0.15/4

**This device is PLC compatible and may be operated by PLCs with output characteristics that match the input load requirements of this signal.

EASY INSTALLATION USING THE SUPPLIED ADAPTAPLATE

1. Pull wires through
center hole and connect to
binding post.

© Copyright 2004 Edwards

2. Slip Adaptabel onto sturdy
hanger and push home.

3. Tighten front screw to complete
installation. (Two screws on 4
inch bells)

D-04

5-7