Alpha 1000-AL Specsheet

Product Specification Sheet APS753 - Rev. 07/2013

1000/AL No Button Video Grille Module (Golmar)1000/AL No Button Video Grille Module (Golmar)

42 Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone] Central Drive • Farmingdale • NY • 11735-1202 • Phone: [phone] • Fax: [phone]

TOLL-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]-FREE: [phone] • Web: AlphaCommunications.com • Email: [e-mail]

Copyright © 1998-2 017 Alpha Communication s® - All Righ ts Reserved.

Due to c ontinuo us product i mprovement, all col ors, sizes, materials, finishes and sp ecifications are subject to change witho ut not ice.

Architects' And Engineers' SpecificationsArchitects' And Engineers' Specifications

The No Button Video grille Module(s) shall be Alpha
Communications® / Golmar Stadio 1000/AL Series, or approved
equal.

Module(s) shall be made of 1.8mm thick anodized aluminum and
shall feature a built- in protected camera window and vandal­resistant speaker/microphone grille.

Module(s) shall be used with t he model EL530 (B&W) or EL531
(COLOR) camera and sound module, as well as any push button or
call butt on module(s) required.

Contractor shall observe all local and national electrical and
building codes.

1000/AL No Call Button 1000/AL No Call Button Video Grille ModuleVideo Grille Module

The AlphaCommunications® / Golmar 1000/AL No Call Button Video
Grille Module is used with t he Stadio series of snap toget her video
door stat ions.

Made of 1.8mm thick anodized aluminum, the 1000/AL feat ures a
vandal-resistant speaker/mic rophone grille along with the
protected video camera window.

The 1000/AL requires t he EL530 (B&W) or EL531 COLOR Camera
and Sound Module (or equivalent depending on system being
used).

The 1000/AL is also used with the model 600/AL c losing heads
(end caps) for t he Stadio series panels.

FeaturesFeatures

Rugged 1.8mm thick anodized aluminum
Built-in metal call pushbuttons
Built-in protec ted double nameholder module(s)

SpecificationsSpecifications

Dimensions:

5.30"W (135mm)

4.57"H (117mm)

End Caps Required:

Model 600/AL. Also known as
'closing heads', used on the top and
bottom module(s) when the panels are
assembled.