AllTrade 691165, 691164 User Manual

It is the owner and/or operator’s responsibility to study all WARNINGS, operating, and maintenance instructions
contained on the product label and instruction manual prior to operation of this unit.The owner/operator shall retain
product instructions for future reference.
#540020
Air Nailer/Stapler Operation Manual
#691164
#691165
Users of this air nailer/stapler must fully understand these instructions. Each person operating this air nailer/stapler must also be of sound mind and body and must not be under the influence of any substance that might impair their vision, dexterity, or judg­ment.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage!
If you encounter any problems or difficulties,
please contact our customer service department at:
1-800-423-3598 1-310-522-9008
1-310-522-9066 Fax
info@alltradetools.com
SAFETY ALERT
Read and understand this entire instruction manual before attempting to assemble, install, operate or maintain this air nailer/stapler.Failure to comply with the instructions may result in serious personal injury and/or proper ty damage!
The following signal words are used to emphasize safety warn­ings that must be followed when using this air nailer/stapler:
Indicates an imminently hazardous situation that, if not avoided, WILL result in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, COULD result in death or serious injury.
Indicates a potentially hazardous situation that, if not avoided, MAY result in minor or moderate injury.
Indicates important information, which if not followed, MAY cause damage to equipment.
2
WARNING
DANGER
WARNING
CAUTION
NOTICE
3
NAILER/STAPLER SPECIFICATIONS
Compressed Air:
Maximum permissible operating pressure: 120PSI (0.8 MPa) Recommended operating pressure range: 60-100PSI (0.4-0.7 MPa)
Magazine Capacity: Approx.100 Brad Nails/Staples
Rotatable Exhaust Cap
Work Contact Element (WCE)
Discharge Area
Nail/Staple Loading Area
Magazine
Trigger
Air and Oil Inlet
Quick Release Latch
4
NAIL/STAPLE INFORMATION
Fastener Gauge 18 Gauge Brad Nails 18 Gauge Crown Staples Fastener Lengths 5/8"-2" 3/8"-1"
Quick
Plug
Quick Plug
(Optional)
Oiler
Air
Hose
Filter
Quick
Coupler
(Optional)
Regulator
Quick
Coupler
Air Hose
Recommended Hookup
NAILS:
Can use brad nails from the following branded air-powered brad nailers: Bostitch
®
BT125sk-2, Campbell Hausfeld
®
NB0030, Paslode®T125-F18, Porter Cable®BN125 and Senco®Finish Pro®15.
STAPLES:
Can use staples from the following branded air-powered staplers: Porter Cable
®
NS100A and Senco®SLS18.
Bostitch®is a registered trademark of The Stanley Works Campbell Hausfeld
®
is a registered trademark of Campbell Hausfeld/Scott Fetzer Co.
DeWalt
®
is a registered trademark of Black & Decker Corp.
Paslode
®
is a registered trademark of Illinois Tool Works Inc.
Porter Cable
®
is a registered trademark of Porter-Cable Corp.
Senco
®
is a registered trademark of Senco Products, Inc.
Finish Pro™ is a trademark of Senco Products, Inc.
UNPACKING & INSPECTION
Do not operate this air nailer/stapler if damaged during shipment, handling or mis-
use. Damage may result in bursting, which can cause serious injury or property damage. All damaged parts must be repaired or replaced as needed prior to operating this air nailer/stapler. If you have any questions, or require assistance with damaged or missing par ts,
please contact our
customer service depar tment at:
1-800-423-3598 1-310-522-9008
1-310-522-9066 Fax
info@alltradetools.com
Please have the serial number, model number, date of purchase, and parts list, (with missing parts indentified), available for reference when calling
SAFETY WARNINGS
READ ALL SAFETY WARNINGS BEFORE
USING AIR NAILER/STAPLER
General Safety Warnings:
• Keep work area clean.Messy areas and cluttered workbenches invite personal injury, and/or proper ty damage.
• Keep children and visitors away.All children should be kept away from the work area. DO NOT let chil­dren handle the air nailer/stapler.Maintain a safe distance for any person near the work area.
• Operating any tools or equipment under the influence of drugs, alcohol, or medication can cause per­sonal injury to yourself and others.
• Wear proper apparel. Remove your jewelry before using air nailer/stapler. Do not wear loose clothing, necklaces, rings, bracelets, or other jewelr y, which may get caught in moving parts. Nonskid footwear and electrically conductive gloves are highly suggested while working.Wear protective hair covering to contain long hair.
• Protect your eyes. The operation of any air tool can result in foreign objects being thrown into the eyes, which can result in severe eye damage. Always wear eye protection with side shields that meets ANSI Z28.1 specifications during air nailer/stapler operation. Eyeglasses are not always safety glasses.
• Be responsible for your hearing. Wear hearing protection during use.
• Do not overreach.Proper footing and balance is a must at all times while using tools. Unstable support may lead to personal injury.
OPERATOR AND OTHERS IN THE WORK AREA MUST WEAR SAFETY GLASSES WITH SIDE SHIELDS.THESE SAFETY GLASSES MUST CON­FORM TO LOCAL REGULATIONS.
• Keep fingers AWAY from the trigger when not dr iving fasteners to avoid acciden-
tal firing.
• Never use near oxygen or other bottled gasses. Explosion may occur. NEVER
5
WARNING
WARNING
Loading...
+ 10 hidden pages