AllSee Technologies P2-B User Manual

Professional LED Video Monitor
User’s Manual
Manual Version MP2-B.1
Professional Monitor User’s Manual (P2-B)
Safety Instructions
Please keep the display away from any heat sources such as electric
radiators or direct sunlight. Place the display in a stable and well-ventilated place.
Please handle with care so as to not damage the LCD panel. The holes or openings on the display are designed for ventilation. Do not
cover or block the ventilation holes or openings with any objects.
Remove protective covering from the screen before you use the display. As the display surface is vulnerable to scratches, avoid touching the
surface with sharp pen point.
Shut off the power supply before cleaning. Use a soft lint-free cloth
instead of a tissue to wipe the screen.
You may use a glass cleaner to clean the product as required. However,
never spray the cleaner directly onto the display surface.
Do not attempt to repair this product yourself! Improperly disassembly of
the product may invalidate the warranty and lead to possible danger!
If you have a problem that cannot be solved using the "Troubleshooting" guidelines, please contact your supplier.
Professional Monitor User’s Manual (P2-B)
Quick Start Guide (connecting to PC)
This section of the guide is to allow rapid set up and use of the unit. Please refer to the main part of the User Guide for full information on use of the unit.
Please follow the steps detailed below:
1. Unpack unit and place in desired location along with PC.
2. Connect the screen to the PC via the HDMI Cable (as shown below).
Figure 1 Screen to PC Connections
3. Power ON the PC.
4. Take the power lead from the accessories bag, insert the lead into the screen and connect to
mains outlet. Then turn ON by the “AC Switch” located next to the power input.
5. If the screen does not display the signal from the PC then connect press the “SOURCE” button
on the remote control and navigate to “HDMI1” and press “PLAY”.
PC-RGB
PC-RGB (BNC)
COMPONENT
DVI
HDMI1
HDMI2
AV1
AV2
DMP
Professional Monitor User’s Manual (P2-B)
Quick Start Guide (Internal Media Player)
The monitor has a simple built in media player that runs directly from a USB stick. This allows you to display a series of images and videos in a continuous loop. To use the screens internal media player please take the following steps:
1. Begin by loading your image and video files directly onto the root drive (without any folders)
of your USB stick in the order that you want them to be displayed. NOTE: To find out what media formats are supported see section 3.4.2 Supported Media Files.
2. Next, plug the USB stick into the USB port of the screen (see figure 2).
Figure 2 USB Port Location
1. Your media files will now display in a continuous loop.
2. If they do not automatically start to play please press “MENU” then go to the Time
submenu then select DMP Setup. Here you can turn auto play on and edit the duration for which your images display.
Professional Monitor User’s Manual (P2-B)
Contents:
1. Introduction ................................................................................................................................ 6
1.1 Box Contents ................................................................................................................... 6
1.2 Product Overview ............................................................................................................ 6
1.3 Serial Control Box (silver remote box) ............................................................................ 7
1.3.1 Connection to the screen ......................................................................................... 7
1.3.2 Serial Control Box Overview ..................................................................................... 8
1.4 Remote Control ............................................................................................................... 9
1.5 Replacing the Remote Control Battery ......................................................................... 10
2. Menu Operation ....................................................................................................................... 11
2.1 Inputs ............................................................................................................................ 15
3. Set Up ........................................................................................................................................ 16
3.1 Ventilation ..................................................................................................................... 16
3.2 Connecting to PC ........................................................................................................... 17
3.3 Video Wall setup ........................................................................................................... 20
3.4 Internal Media Player .................................................................................................... 22
3.4.1 Usage ...................................................................................................................... 22
3.4.2 Supported Media Formats ..................................................................................... 23
4. F.A.Qs and Troubleshooting Guide ........................................................................................... 24
4.1 My Video Monitor is not displaying what is on my PC ................................................. 24
4.1.1 Input Source ........................................................................................................... 24
4.1.2 Display/monitor button on PC keyboard ............................................................... 24
4.2 My display goes into standby mode ............................................................................. 25
4.2.1 Power saving function ............................................................................................ 25
4.3 What are my monitor’s refresh rates? .......................................................................... 26
4.4 How do I use my monitor as part of a video wall? ........................................................ 27
4.5 My monitor's image is unstable, unfocused or swimming ........................................... 28
Professional Monitor User’s Manual (P2-B)
Table of Figures
Figure 1 Screen to PC Connections ...................................................................................................... 2
Figure 2 USB Port Location ................................................................................................................... 3
Figure 3 Product Overview ................................................................................................................... 6
Figure 4 Serial Control Box to Screen Connection ............................................................................... 7
Figure 5 Screen Inputs........................................................................................................................ 15
Figure 6 Ventilation Area ................................................................................................................... 16
Figure 7 Screen to PC Connections .................................................................................................... 17
Figure 8 USB Port Location ................................................................................................................. 22
Professional Monitor User’s Manual (P2-B)
1. Introduction
Congratulations on your purchase of our product. Please read carefully and follow all instructions in the manual before first use.
The product should not be exposed to liquids dripping or splashing and no objects filled with liquids, such as vases, should be placed on the product.
For user convenience, a number of operations can be performed through the remote control.
Attention:
1. Do not change any default setting when it is unnecessary.
2. Keep the product far away from water during installation and use.
1.1 Box Contents
1xProfessional LED Video Monitor
1xPower Cable
1xHDMI Cable
1xRemote Control (with AAA batteries)
1xCD (User Manual)
IMPORTANT: Please retain your screen’s packaging for the duration of your warranty.
1.2 Product Overview
Figure 3 Product Overview
Professional Monitor User’s Manual (P2-B)
1.3 Serial Control Box (silver remote box)
1.3.1 Connection to the screen
Before using the Remote Control the Serial Control Box (with the remote’s infrared sensor in it)
must be connected to the screen.
Figure 4 Serial Control Box to Screen Connection
Unless Remote Control is faulty it is recommended that you do not attempt to change any settings with the Serial Control Box, only use it as a sensor for the main Remote Control.
Once all required changes have been made the Serial Control Box can be disconnected.
Professional Monitor User’s Manual (P2-B)
1.3.2 Serial Control Box Overview
Button
Function
Right navigation button
adjust volume
select in OSD menu
select signals input
adjust values
Left navigation button
MENU
Open/close OSD menu or return to previous menu
Select signal input
INPUT
Signal input select
Loading...
+ 20 hidden pages