All Rights Reserved HALO LIVE PRO User Manual

HaloLivePro

Multi-
Media
Station

User Manual

INTRODUCTION & FEATURES

HaloLivePro keeps up with your social media needs,
allowing you to record or go live from two smartphones at
once with its dual phone mounts. This extendable selfie stick
comes with a removable tripod base and shutter remote for
easy set up and captures. The powerful LED ring light
features 3-modes and 10 brightness levels for the perfect
glow in any setting.

USB powered ring light
Dual multi-position phone mounts
In-line power/mode/brightness remote
Extendable up to 5.75” ft.
Removable tripod base
Camera shutter remote

SPECIFICATIONS

Power: 14W
Size: 8in x 69.1in
Material: ABS/PC/Metal Rod
LED Beads: 72pcs
Power Supply: USB 5V (1-4A)

USER INSTRUCTIONS

1. Screw on tripod base. (If only using as handheld selfie
stick, disregard this step)

2. Place Halo on a flat, stable surface, and extend rod to
desired length.

3. Adjust ring light to desired angle and lock with turn knob.

4. Attach phone mounts to both the rod and ring light. The
rod phone mount clips on and the ring light phone mount is
secured by turning the base clockwise / counterclockwise to
release. (Phone mount for ring light can be secured to the
top or either side of light.)

5. Plug the remote cord into any USB power source and
press the power button “ ”

6. When the LED light is turned on, the brightness level will be
set as your previous brightness. First time turning on the LED
Light, brightness level is set on the highest level, brightness level 10.

7. To increase or decrease brightness, press “–” or “+ ” until
the desired setting is reached.

8. To rotate between the three light modes
(white/warm/mixed) press “ ”

9. To store HaloTravelPro, remove smartphone and turn
locking knob counterclockwise, then fold down ring light.

INSTRUCTIONS (CONT.)

10. Retract rod to its shortest length and twist the grip at the
base counterclockwise.

11. Fold the device into its original state and wrap the remote
cord around it.

BLUETOOTH PAIRING

1. Turn on the shutter remote

2. On your smartphone, find the “Bluetooth devices
available” list

3. Select “OnAir Remote” from the list to pair

4. Switch to camera/video mode on your phone

5. Click the shutter remote button to take pictures and record

PACKAGE CONTENTS

HaloLivePro
User Manual

Cellphone holder

Controller

Tripod Stand

LED Ring
light

Cellphone holder

Extendable Stand Rod

CONTROLLER

+

Brightness

Brightness -

TROUBLESHOOTING

If the unit malfunctions, do not attempt to repair
it yourself. Doing so will violate the tzumi Warranty and may
cause permanent damage. Instead, contact the Customer
Support team at tzumi.com/support for assistance.

©Copyright 2020 All Rights Reserved. Made In China.

Light mode switch

On/Off button