Alloy Computer Products NuDOG-MPT User Manual
NuDOG-MPT
User’s Manual
V 1.0.0
August 29, 2007
Xtramus Technologies
E-mail: sales@xtramus.com
Web: http://www.xtramus.com
Phone: +886-2-8227-6611
Fax: +886-2-8227-6622
Copyright
Copyright © 2007 Xtramus Technologies. All Rights Reserved. The information contained in this
document is the property of Xtramus Technologies. No part of this publication may be reproduced, stored
in a retrieval system, or transmitted, in any form or by any means, without the prior written permission of
Xtramus Technologies.
Disclaimer
The information contained in this document is subject to change without notice and does not represent a
commitment on the part of Xtramus Technologies. The information in this document is believed to be
accurate and reliable, however, Xtramus Technologies assumes no responsibility or liability for any errors
or inaccuracies that may appear in the document.
Trademarks
NuDOG-MPT™ is a trademark or registered trademark of Xtramus Technologies. All other trademarks
and registered trademarks are the property of their respective owners.
Warranty
Xtramus Technologies warrants to recipient that hardware, which it supplies with this document, will be
free from significant defects in materials and workmanship for a period of twelve (12) months from the
date of delivery, under normal use and conditions. Defective Product under warranty shall be, at Xtramus
Technologies’ discretion, repaired or replaced. To the extent permitted by applicable law, all implied
warranties, including but not limited to implied warranties of merchantability, non-infringement and fitness
for a particular purpose, are hereby excluded, and the liability to Xtramus Technologies, if any, for
damages relating to any allegedly defective product shall be limited to the actual price paid by the
purchaser for such product. In no event will Xtramus Technologies be liable for costs of procurement of
substitute products or services, lost profits, or any special, direct, indirect, consequential, or incidental
damages, however caused and on any theory of liability, arising in any way out of the sale and/or license
of products or services to recipient even if advised of the possibility of such damages and notwithstanding
any failure of essential purpose of any limited remedy.
XTRAMUS TECHNOLOGIES®
E-Mail: sales@xtramus.com
Http://www.Xtramus.com
CONTENTS
1. Introduction................................................................................................................1
1.1 Specifications........................................................................................................1
1.2 Function Description.............................................................................................1
2. Software Installation and Uninstallation....................................................................2
2.1 Installation.............................................................................................................2
2.2 Uninstallation........................................................................................................3
3. Main Window ............................................................................................................4
3.1 T able Description..................................................................................................4
3.2 Interface Description.............................................................................................5
3.2.1 Result Status.................................................................................................5
3.2.2 Enforcement Buttons ...................................................................................5
3.2.3 Model Name.................................................................................................6
3.2.4 Configurations of Task.................................................................................6
3.2.5 Time.............................................................................................................7
3.2.6 Iteration Setting............................................................................................7
3.2.7 Memo...........................................................................................................7
3.2.8 Counter Window..........................................................................................8
3.2.9 T ask Table ....................................................................................................8
3.2.10 LED Panel..................................................................................................9
4. Function Setting.........................................................................................................9
4.1 New Model............................................................................................................9
4.1.1 Configuration Setup...................................................................................10
4.1.2 T ask Setting................................................................................................10
4.1.3 T ask Ping....................................................................................................16
4.1.4 Environment Setting..................................................................................17
4.2 Load Model.........................................................................................................19
4.3 Modify Model.....................................................................................................20
4.4 Modify Configuration.........................................................................................21
5. T esting......................................................................................................................23
XTRAMUS TECHNOLOGIES®
E-Mail: sales@xtramus.com
Http://www.Xtramus.com
1. Introduction
NuDOG-MPT makes NuDOG an accurate and efficient Ethernet tester for batch tasks.
Various packet generation and reception testing items could be set for pre-defined
testing modules. The utility of NuDOG-MPT is easy to load testing models. All simple
and visualized results and detailed testing logs are available to access based on
requirements. NuDOG-MPT is a powerful and convenient tool to apply on NuDOG for
batch tests.
1.1 Specifications
Item Description
Platform NuDOG
Operating System Microsoft Windows 2000 or Windows XP
Pre-built
Report Test report in text format
Configuration Text file and GUI
Tx/Rx Forwarding, Flow Control, Broadcast, Filter, CRC Error,
Ping
1.2 Function Description
Pre-built tests in the program include Forwarding, Flow Control, Broadcast, Filter,
CRC Error and Ping tests.
Tes t Na me
Forwarding Test
FW_10H (10M Half Duplex)
FW_10F (10M Full Duplex)
FW_100H (100M Half Duplex)
Test Item
FW_100F (100M Full Duplex)
FC_10F_100F (10M Full ↔100M Full)
Flow Control Test
Broadcast Test
1
XTRAMUS TECHNOLOGIES®
FC_100F_10F (100M Full ↔10M Full)
BC_10H
BC_10F
E-Mail: sales@xtramus.com
Http://www.Xtramus.com
Filter Test
BC_100H
BC_100F
FT_10H
FT_10F
FT_100H
FT_100F
CRC_10H
CRC Error Test
Ping Test
CRC_10F
CRC_100H
CRC_100F
Ping (A→B)
Ping (B→A)
Ping (A→N)
Ping (B→N)
2. Software Installation and Uninstallation
2.1 Installation
Double click NuDOG-MPT_setup.exe .
Start NuDOG-MPT installation.
Click Next to continue next step.
2
XTRAMUS TECHNOLOGIES®
Read License Agreement carefully before
selecting to accept all terms and then
click Next for next step.
E-Mail: sales@xtramus.com
Http://www.Xtramus.com
Input user’s information.
Then click Next for next step.
NuDOG-MPT Installation is in progress.
2.2 Uninstallation
Confirm and review installation settings.
Click Install for next step.
NuDOG-MPT has been Installed
successfully. Click Finish to exit the
Wizard.
If applications do not work properly, it may be necessary to uninstall them. Or before
updating a new version of the software, the previous version must be uninstalled first.
There are two ways to uninstall NuDOG-MPT: Start Menu or Control Panel.
Start Menu: Click on Windows Start menu → Programs → Xtramus →
NuDOG → NuDOG-MPT → Uninstall NuDOG-MPT.
Control Panel: Activate the Control Panel → Add/Remove Programs →
NuDOG-MPT → Change/Remove.
3
XTRAMUS TECHNOLOGIES®
E-Mail: sales@xtramus.com
Http://www.Xtramus.com
3. Main Window
The main window of the user interface is illustrated below. The top-level menu
includes the following major parts: Setting, View and Help.
3.1 Table Description
The choices for the Setting Menu are described in the table below:
Menu Choice Usage
Modify Model Open a dialog to modify configurations of an existing model.
New Model Create configuration of a new model.
Exit Exit NuDOG-MPT window
The choices for the View Menu are described in the table below:
Menu Choice Usage
Show Current Log Open the log file of the last test.
Show Current Config Open the configuration file of the loaded model.
Show Current Folder Open the folder of the loaded model.
Show NuDOG
Information
Show the system version of NuDOG device.
4
XTRAMUS TECHNOLOGIES®
E-Mail: sales@xtramus.com
Http://www.Xtramus.com
The choices for the Help Menu are described in the table below:
Menu Choice Usage
Read Me Open an introduction file about settings.
About NuDOG-MPT
Show information of NuDOG-MPT version.
3.2 Interface Description
3.2.1 Result Status
The LED indicators of Result Status in the main window are described in the table
below.
Item Description
Pass
Frame Loss
Frame Exceed
Receives Error: CRC Error, Checksum Error, Alignment Error, Dribble Error,
Oversize Frame, and Undersize Frame.
Frame Loss and Receives Error Frames
Frame Exceed and Receive Error Frames
3.2.2 Enforcement Buttons
The control buttons in the main window are described in the table below.
Item Description
5
XTRAMUS TECHNOLOGIES®
E-Mail: sales@xtramus.com
Http://www.Xtramus.com
Loads settings of the model corresponding to DUT.
Reloads the same model if the parameters have been modified.
Connects to NuDOG.
Starts testing.
Stops testing.
Exits the program.
First, click button to open an .ini file. Click button to run the
test.
3.2.3 Model Name
Go to Setting menu and click New Model to bring out the window below.
Input a name to create a new model, than click OK button to exit.
3.2.4 Configurations of Task
Showing information of current parameters for Frame test including server address,
frame length, frame count, frame gap, and for Ping test including direction, source IP
and destination IP.
6
XTRAMUS TECHNOLOGIES®
E-Mail: sales@xtramus.com
Http://www.Xtramus.com
Loading...