Allnet ALL-SG8826PMX-10G User Manual
ALLNET ALL-SG8826PMX-10G
he
products
excepted.
w
.allne
.
d
e
ALLNET ALL-SG8826PMX-10G / full managed 24 Ports
Gigabit PoE & 2xSFP/SFP+ & 2xSFP+ Stack-Ports
• 24Port 10/100/1000Base-T PoE (1-24) & 2x 10Gigabit SFP+ (25/28) & 2x 10Gigabit SFP+ for stacking (26/27)
• MiniGBIC ports are compatible with SFP 1G oder SFP+ 10G
• stack up to 16 switches into one single switch
• 88G non-blocking switching capability
• Layer 2+ full management software features
• 4K VLAN, 8 queues QoS, advanced VLANs
• MSTP, LACP, LLDP, sFlow,
• 802.1X, RADIUS, TACAS+, ACL
• IPv6, IPv4/v6 multicast fi ltering
• 802.3az energy effi cient ethernet
Article: 112082
Errors, omissions and technical modi cations that guarantee the progress and further development of the products excepted.
www.allnet.de
The New 10G Full-Managed ALLNET Ethernet Switch Series
The ALLNET ALL-SG8826PMX-10G switch is 24-port 10/100/1000Base-T PoE & 2x 10G SFP+ for Stacking &
2x 10G SFP+ Open Slot Rack-mount L2+ Full Management Network Switch that is designed for medium or
large network environment to strengthen its network connection. The ALLNET ALL-SG8826PMX-10G switch
supports 88G non-blocking switch fabric, the 24x gigabit ports and 2x 10G ports can transmit and receive data traffi c without any lost. The EEE feature reduces the power consumption when there is no traffi c
forwarding even port is still connected. The 10G uplink port design is available and important for high
bandwidth uplink request when cascaded with other switch. The ALL-SG8826-PMX-10G also supports Layer
2+ full management software features. These features are powerful to provide network control, management, monitor and security feature requests. Including rack-mount brackets, the 19“ size fi ts into your rack
environment. It is a superb choice to boost your network with better performance and effi ciency.
2x 10G Gigabit SFP+ Open Slots
The ALL-SG8826-PMX-10G equips with 2 10G SFP+ open slots as the uplink ports, the 10G uplink design
provides an excellent solution for expanding your network from 1G to 10G. By 10G speed, this product
provides high fl exibility and high bandwidth connectivity to another 10G switch or the Servers, Workstations and other attached devices which support 10G interface. The user can also aggregate the 10G ports
as Trunk group to enlarge the bandwidth.
Stacking Features
The ALL-SG8826-PMX-10G include a stacking feature by using 2 SFP+ ports that allows multiple switches
to operate as a single unit. A single switch in the stack can manages all the units in the stack and uses a
single IP address which allows the user to manage every port in the stack from this one address. These
stacks can include up to 16 switches, or total 384 gigabit ports plus 32 ports 10G in a switch.
Full Layer 2 Management Features
The switch includes full Layer 2+ Management features. The software set includes up to 4K 802.1Q VLAN
and advanced Protocol VLAN, Private VLAN, MVR…features. There are 8 physical queues Quality of Service, IPv4/v6 Multicast fi ltering, Rapid Spanning Tree protocol to avoid network loop, Multiple Spanning
Tree Protocol to integrate VLAN and Spanning Tree, LACP, LLDP; sFlow, port mirroring, cable diagnostic and
advanced Network Security features. It also provides Console CLI for out of band management and SNMP,
Web GUI for in band Management.
Advanced Security
The ALL-SG8826-PMX-10G supports advanced security features. For switch management, there are secured
HTTPS and SSH, the login password, confi guration packets are secured. The port binding allows to bind
specifi c MAC address to the port, only the MAC has the privilege to access the network. The 802.1X port
based Access Control, every user should be authorized fi rst when they want to access the network. AAA
is the short of the Authentication, Authorization and Accounting with RADIUS, TACAS+ server. Layer 2+
Access Control List allows user to defi ne the access privilege based on IP, MAC, Port number etc.
Errors, omissions and technical modi cations that guarantee the progress and further development of the products excepted.
www.allnet.de
Technical Data
Interface
Performance
QoS Features
Security
Number of Port:
10/100/1000BaseT(X) RJ-45 Port : 24, Auto-negotiation, Auto MDI/MDIX
1G SFP/10G SFP+: 2
Stacking slot: 2
Switching Capacity: 88G bps
MAC Address Table Size: 32K
Forwarding Rate: 95.2Mpps
Packet Buffer: 4Mb
Number of Priority queue: 8 queues/ port
Scheduling for priority queue : WRR/Strict Priority scheduling/Hybrid
CoS :
802.1p/ IP Precedence/ IP TOS Precedence
IP DSCP/ Port based Priority
Rate Limiting: Ingress/Egress: 1Kbps/ 1pps granularity
DiffServ (RFC2474) remarking
User Name / Password Protection
Stacking Unit: max 16
User Privilege: up to 15 levels
IEEE 802.1x: Port-based Access Control
IP Source Guard
MAC Based Authentication
Web-based Authentication
HTTPS
SSHv2
RADIUS: Authentication/ Accounting
TACACS+: Authentication
ACL (Access control list)
PoE Features
Errors, omissions and technical modi cations that guarantee the progress and further development of the products excepted.
802.3af/at compliant
Max. power output per port: 30W
Power consumption : 250W / 500W Current Sharing
Internal Power: In
PD classi cation
Power management:
Enable/Disable per-port
Priority setting per-port
Overloading protection per-port
www.allnet.de
Loading...