Allnet ALL-SG8318PM User Manual

ALLNET ALL-SG8318PM

16 Port Gigabit PoE cooper + 2x SFP smart managed, fanless

• 16 port Gigabit non-blocking switch architecture

• Supports NWay protocol for speed (10/100 / 1000Mbps) and duplex mode
(half / full) auto-detection

• Supports back-pressure (half duplex), fl ow control (IEEE 802.3x and IEEE

802.3az Energy Effi cient Ethernet

• VLAN „64 Static / Port-Based / Tagged Based

• Link Aggregation (IEEE802.3ad LACP & Static Trunk)

• IGMP Snooping

• QoS (QoS multi-label, queue confi g, QoS mapping)

• Storm Control

• Total-fanless, no annoying noise more ... max. 265W Budget

• 19 „inch angle“ or wall / table mounting possible

Artikel: 133577

Note: Product specifi cation is subject to change without notice.

www.allnet.de

The new ALLNET ALL-SG8318PM switch provides an optimal basis for small and medium-sized work­groups with high network and data volume, and enables fast data transmission in the network.

With a total of 16 backward-compatible Gigabit PoE ports, the connected PoE devices are reliably and effi ci-

ently connected to each other.

Due to the fanless design, the ALL-SG8318PM is also ideally suited for offi ce environments, since no distur-

bing noises are generated. The switch is smart manageable and supports all necessary standards such as QoS,
VLAN, Storm Control or IGMP Snooping. This ensures the highest performance and security in your network.

The robust metal housing is suitable for mounting in a 19 "cabinet as well as for wall mounting. The ALL­SG8318PM also has 2x SFP miniGBIC slots to connect remote server / uplink devices via Lichwell cable.

Note: Product specifi cation is subject to change without notice.

www.allnet.de