ALLNET ALLNET ALL174XGA Instructions

ALLNET USB 3.0 Typ-A/C Ethernet Adapter 2.5

Gigabit LAN ALL0174XG

Quick Installation Guide

The USB-C 2.5 Gigabit Ethernet adapter converts a USB-C port into a
10/100/1000/2500 Base-T Ethernet port. It can replace a damaged computer
network card or connect a USB-C PC to a high speed Ethernet Network at places
where a wireless connection is slow, oncosistent or not available at all. It is
faster than gigabit and future-proof, hence idea for video conferencing, gaming,
large files transferring and video streaming.

System Requirements

Intel Premium III 1GHz (or above) -256MB RAM/CD-ROM/ 100MB Hard Disk
Space (at least) / 100MB Hard Disk Space (at least)/ USB Type A Port-Windows
7/8/8.1/10, Mac OS 10.6 –10.10 or above

Product Diagram

Port LED

Function

1

RJ45 Port

Connect to a Network Device.

2

LED

• Solid Blue: Indicates that the CAT5/6/6a
Cable is connected to the RJ45 Port with a
link speed of 2.5Gbps.

• Solid Green: Indicates that the CAT5/6/6a
Cable is linked to the RJ45 Port with a link
speed of 1Gbps/100Mbps/10Mbps.

• Flashing LED: Indicates network activity.

• Off: Indicates no connection.

3

USB-A/C
Connector

Used to connect the Network Adapter to the
Host Computer.

Installation

Hardware Installation

1. Connect a CAT5/6/6a Cable to the RJ45 Port on the Network Adapter and to a
Network Device.

2. Connect the U SB-A Connector on the Network Adapter to a USB-A/C port on
the Host Computer.

Driver Installation (From Virtual CD)

1. If the Drivers do not automatically download when you connect the Network
Adapter to the Host Computer, a message that a Virtual CD is loaded will appear.

2. Click on the message, the CD Drive screen will open.

3. Click on the folder that is compatible with your Host Computer and run the
RTK_NIC_DRIVER_INSTALLER file to begin the background installation.

To view manuals, FAQs, videos, drivers, downloads, technical drawings,
and more, visit xxxxxxxxxx

Network Connection and Configuration

Please ensure you have connected your network device(s) to the adapter's LAN
Port via an Ethernet cable and that the adapter plugs into a USB Port.

Notes on Ethernet Cables

■ Sometimes a so-called crossover Ethernet cable is required for connection to

certain network equipments. As adapter's LAN port supports Auto-MDIX
feature, it eliminates the need to use crossover cables.

■ In order to achieve the full 2.5Gbps speeds for this adapter, you will need a

CAT 5e or higher rated Ethernet cable that does not exceed 100m in length.

Windows OS

1. Go to Device Manager you will find the driver has been installed.

mac OS

2. Go to Apple Menu > System Preferences > Network. You could see
"Connected " and USB 10/100/1G/2.5G is currently active...". Your new Ethernet
adapter should now be available.