ALLNET MSR ALL3073V2WLAN
Part No.: 174036
Vendor Part No.: ALL3073V2WLAN
EAN CODE
4038816090287
Highlights:
Enables the switching of the connected consumer (up to 16A) via the integrated web server- New Release
3.2
Wireless LAN according to IEEE802.11b/g/n with 300 Mbps & 10/100 Mbit RJ45 network connection
German earth contact plug/socket
for 200 - 250 V alternating voltage
Switching time, program controlled or manual possible
The ALL3073v2 network socket can be used to switch electrical devices on and off via a computer network. The
ALL3073v2 acts as an intermediate plug between the power socket and the electrical consumer. It is integrated
into a computer network and given a unique IP address. Configuration and operation are carried out
independently of a specific platform or operating system via any web browser from PC, MAC, webpad or
smartphone. Additional software is not required.
The switching operations can be programmed manually, time-controlled, etc.. Several ALL3073v2 can be
switched in a network depending on each other. You can also work together with other ALLNET automation
solutions, such as ALL369x Powermeter, ALL3418v2, ALL3500, ALL3505, ALL4500, or ALL5000.
The ALLNET ALL3073v2 adapter is also equipped with the heavily revised user interface 3.2. In addition to
numerous innovations in the user interface, Release 3.2 for the first time also offers the possibility of integrating
several ALLNET remote sensors and actuators into the control interface quickly and easily via JSON. The sensor
data can thus be managed across locations via a central interface, which leads to significantly greater clarity and
simpler administration.
In addition to the wired 10/100Mbit/s RJ45 network interface, the ALL3073v2 also has a wireless LAN interface
ALLNET GmbH - Maistraße 2 - 82110 Germering - sales@allnet.de - 089 / 894 222 22
Errors and technical changes that serve the interests of progress or development of the product, are reserved.
Page 1/3
Part No.: 174036
Vendor Part No.: ALL3073V2WLAN
according to the IEEE802.1b/g/n standard and can therefore also be integrated into a wireless LAN network; as a
client or access point.
With the "Server Monitoring" function, you can cause the ALL3073v2 to monitor and reset a computer or router.
A ping is sent to the registered system, if the system does not respond within a specified time, the output is turned
off for a configurable time.
Application examples:
Targeted control and restart of PCs and servers from a distance
Remote restart of router incl. automatic startup (dead time programmable)
Time-controlled elimination of unnecessary power consumption by standby devices
Complex switching scenarios in connection with other ALLNET building automation products incl. influence of
temperature, humidity, etc.
many other applications...
Technical data:
Network: 10BaseT,100BaseTX
Network connection:RJ45
Supported standards:IEEE 802.3, IEEE 802.3u
Protocols:HTTP/HTTPS, TCP/IP
Management / Control: via web browser, XML, JSON
Operating systems: all network-compatible operating systems
Voltage range: 200 - 250 Volt
Switching current: max. 16 Amps = 3680 resistive load
Housing: Plastic housing with integrated earth contact power socket/plug
environment: Temperature Operation: 0 ~ 40 °C
Humidity Operating: 10% ~ 85% (non-condensing)
Storage temperature: -20 ~ 60 °C
Humidity Storage: 5% ~ 90% (non-condensing)
Dimensions: 125 x 68 x 40 (60) mm (height x width x depth)
Weight: 200 gram (adapter only)
CE
ALLNET GmbH - Maistraße 2 - 82110 Germering - sales@allnet.de - 089 / 894 222 22
Errors and technical changes that serve the interests of progress or development of the product, are reserved.
Page 2/3
Loading...