Allnet ALL0234NANO User guide

User´s Manual

ALL0234Nano

USB Wireless N 150Mbit Adapter

ALLNET GmbH 2011 ALL0234Nano

Network Card Installation

Please follow the following steps to install your new wireless network card:

1. Insert the ALL0234Nano into an empty USB2.0 port of your computer when computer has power on.

Never use force to insert the stick, if you feel it’s stuck, flip the stick over and try again.

2. Insert device driver CD into the CDROM drive of your computer, double click the ‘Setup.exe’ icon and

run the ‘Setup.exe’ program.

3. Then pop up the installshield Wizard.

4. Click ‘Next’.

1

ALLNET GmbH 2011 ALL0234Nano

5. Please wait while the installation procedure is running. Finally, click ‘Finish’ and restart your
computer to finish the driver installation.

2