PIECE QUANTITY
A
B
H1 8X
H2 8X
H3 1X
1X
2X
Flat washer 12 mm
Top part
Leg
The legs and hardware are located under the drawer
Allen key 4 mm
CARE AND MAINTENANCE
Spot clean using a mild water-free solvent. Only a professional cleaner should
undertake a complete overall cleaning.
The use of steam or water-based cleaners may cause excessive shrinking or
staining.
NOTICE
* Please make sure that you have all parts indicated before you begin assembly of
this item
* This item should be assembled on a soft surface to prevent scratching the finish
during assembly
* This item may require periodic tightening
Part List and Hardware List
Allen bolt 20x6 mm
DESCRIPTION
PICTURE
Product dimensions: 19"W* 13.8"D*
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list.
If any part is missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 10 minutes.
Tools Required for Assembly (included): Allen Key
The legs and hardware are located under the drawer
STEP2 PUT THE WASHERS ON THE BOLT IN THE ORDER
SHOWN IN THE PICTURE
STEP3 INSERT THE FRONT LEGS AND SCREW IN THE BOLTS
BUT DON'T TIGHTEN COMPLETELY
STEP1 OPEN THE ZIPPER ON THE INSIDE OF THE DRAWER
AND TAKE OUT HARDWARE AND MOVE LEGS TO THE
POSITION OF BOLTS
Loading...