Velvet Bench
Assembly Instructions
PARTS LIST
LABEL PICTURE DESCRIPTION QTY
A
B
Bench
Leg
1
4
HARDWARE
LABEL PICTURE DESCRIPTION QTY
a
b
Metal Gasket
Screw
12
4
c
d
e
f
BEFORE BEGINNING ASSEMBLY:
Read instructions cover to cover
Have two adults on hand for assembly
Do NOT assemble on flooring or carpet. Assemble on a clean non-
marring surface (ex: packing foam)
Wrench
Nut
Spring Washer
Spanner
1
8
12
1
Save all packaging until assembly is completed
STEP 1
ASSEMBLY STEPS
c
b
e
a
> Position the product on its top of the seat as shown.
> Open FRPSDUWPHQWWRUHPRYHOHJV.
STEP 2
d
f
CARE & MAINTENANCE
Do not put hot items directy on furniture surface.
Do not clean furniture with harsh cleansers or polish.
Dust and pick up spills using a clean,non-colored, lint-free cloth.
Stains may be removed with mild soap solution and a damp cloth.
Do not place furniture under direct sunlight.
Do not place furniture near heating or colling vents.
Do not write on furniture without a padded barrier to protect the surface.
Do not place furniture outside, for indoor use only.
MATERIAL CARE INSTRUCTIONS
Fabric
Clean regularly with a vacuum cleaner. Do not use any solvent containing a cleaning agent.
Remove spilled liquids immediately in the direction of seam to seam. Use distilled/purified
water to avoid chalk stains.
Glass
Clean with a glass cleaner. Never use abrasive detergents. Use table mats on the surface to
avoid scratches from forming.
Metal
For regular cleaning, use a slightly wet cloth and immediately dry. You may periodically use
special cleaning agents, especially for chrome or copper materials.
Polished Marble and Stone
Quarried stone or marble contains natural fissures along with color variations. These are
not considered defects as they enhance the look and the uniqueness of the item. As hard
as stone or marble is, the surface is still porous and might stain from liquids or foods. Glass
cleaner or soap and water may be used to maintain the stone or marble surfaces. As a
recommendation, we suggest polishing these materials with clean wax. For best results use a
polisher product which contains carnauba wax. This type of wax is readily available from your
local home improvement store. Waxing often will help protect the surface from stains caused
by water or liquids. Please note that applying wax prior to use with foods or liquids is highly
recommended.
Synthetic Leather
Dust off regularly and use a slightly wet sponge periodically. Use light soapy water to remove
stains. Persistent stains can be removed by carefully using cleaning solvents. Always clean in
the direction of seam to seam.
Solid Wood
As wood is a hygroscopic natural product, it may shift in various temperature or humidity,
depending on the type of wood, construction, and place
of location. Optimum conditions are 64-70
with the humidity of 45-55%.
Untreated and Lacquered Wood
Dust off regularly. Use slightly wet cloth once in a while.
Clean in the direction of the wood texture. Avoid stagnant
moisture.
Oiled, Bleached, and Waxed Wood
Dust off regularly with a damp cloth. Protect and clean
with paraffin oil-based products.
Wood Laminated or Coated with Melamine Resin
Use antistatic dusters for daily care. Use lukewarm suds
to remove light staining. Do not use abrasive detergents,
any wax, or furniture polish. Melamine resin can be
cleaned best with cleaning solvents in combination with
a chamois leather.
F (18-21 C),
Loading...