Allmand NIGHT LITE PRO LD User Manual

NIGHT-LITE PRO SERIES

NIGHT-LITE PRO

PARTS MANUAL

Serial Number 0294PRO02 and Up

ALLMAND BROS. INC

P.O. BOX 888

HOLDREGE, NE 68949

PHONE: [phone]

ALLMAND F AX: 308/995-5887

ALLMAND P ARTS F AX: 308/995-4883

NIGHT-LITE PRO SERIES

* Use these codes to designate color needed:

SEPTEMBER 2001

For Parts and Updates visit Allmand on the Web at www.allmand.com

01-White 06-Allmand Gold
02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

A-1A

NIGHT-LITE PRO SERIES

SHO 1000 METALLIC VAPOR LAMP

19

15

21

NIGHT-LITE PRO SERIES

SHO 1000 METALLIC VAPOR LAMP

NO REQ’D PART NO DESCRIPTION

NS 610250 LAMP HOLDER ASS’Y WITH YOKE AND LAMP (SOLID MT .)

(REM. FIXTURES)
NS 610265 LAMP HOLDER ASS’Y WITH YOKE AND LAMP (SOLID MT .) (HPS)
NS 610255 LAMP HOLDER ASSEMBLY W/YOKE, LAMP AND CUSHIONS

(CUSHION MT .)
NS 610253 LAMP HOLDER ASSEMBL Y W/YOKE, LAMP AND CUSHIONS

(CUSHION MT .) (HPS)
NS 650144 LAMP HOLDER ASSEMBL Y WITH YOKE AND LAMP
NS 610263 LAMP HOLDER ASSEMBL Y WITH YOKE AND CUSHIONS, W/ HPS LAMP

(CUSHION MOUNT)
1 1 610208 ALUMINUM RING
2 1 610211 LAMP BT-37
2A 1 610218 LAMP 1000W SHO ED37 (HPS)
3 2 ** #8 WASHER (STAINLESS STEEL)
4 2 ** #8-32 NC X 1/2 HEX HEAD BOL T (STAINLESS STEEL)

5 8 041028 #10-24 NC X 1/2 HEX HEAD BOLT (ST AINLESS STEEL)
6 8 043017 #10 INTERNAL TOOTH WASHER
7 1 610207 ALUMINUM PLATE
8 2 044013 #8 -32 NC NYLON INSERT NUT (STAINLESS STEEL)
9 1 610209 LAMP TI P S UP PO RT
NS 1 650250 LAMP TIP SUPPORT (HIGH PRESSURE SODIUM)
10 1 610210 LAMP TIP SUPPORT TUBE
11 1 610212 CERAMIC SOCKET
12 1 610201 REFLECTOR
13 2 610213 END HOUSING GASKET
14 1 610206 RH SOLID END CASTING
15 2 044037 3/8 - 24 NF NYLON INSERT NUT
16 4 047019 .75 OD x.385 ID x.20 NYLON WASHER
17 2 045142 3/8 - 24 NF X 3/8 - 16 NC X 2" STUD
18 1 680493 SOLID MOUNT YOKE
19 2 047016 3/8 S AE W ASHER
20 044031 5/16-18 KEPS NUT
21 2 041035 #10 - 24 NC X 1 1/4 ROUND HEAD BOLT
22 4 610260 RUBBER SHOCK MOUNT SHO 1000
23 2 610235 SHO CUSHION MOUNT PLATE
24 2 044018 10-24 NYLON LOCK NUT
25 1 610234 SHO 1000 CUSHION MOUNT YOKE
26 610236 SHO 1000 CUSHION MOUNT YOKE ASSEMBL Y
27 650159 16/3 PORTABLE CORD 66
27A 1 310434 LAMP CONNECTOR AND LEAD (REMOVEABLE FIXTURE ONL Y)
28 1 510007 1/2-CORD GRIP
29 1 610214 1/2” ENTRANCE ELBOW
30 1 610215 1/2 CONDUIT NIPPLE
31 1 610205 LH SOCKET END CASTING
32 1 ** GREEN HEA T TEMP WIRE
33 1 ** BLACK HEA T TEMP WIRE
34 1 ** WHITE HEA T TEMP WIRE
35 1 610203 LENS
36 1 610217 LENS GASKET (SILICONE)
37 2 044019 #10-24 NYLON INSERT NUT (STAINLESS)
38 1 610202 LENS CHANNEL SET
39 2 045070 #10-24 NC SQ BD HOOK BOLT (W/VISOR)
40 1 610017 SHO 1000 LIGHT VISOR (OPTIONAL

41 2 044016 #10-24 NC KEPS NUT

LEGEND: NS= Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

15

A-1B

B-1A

NIGHT-LITE PRO SERIES

MANUAL WINCH TOWER ASSEMBLY

NIGHT-LITE PRO SERIES

MANUAL WINCH TOWER ASSEMBLY

B-1B

NO REQ’D PART NO DESCRIPTION

1 1 680102* 4" MANUAL WINCH TOWER WELDMENT
2 2 320110 3” PULLEY W/BUSHING
3 2 620550 1/2 - 13 NC X 2 1/8 LOCKING KNOB
4 3 6501 10 .312 TOWER P AD
5 1 352280 PLASTIC T OWER P AD
6 1 043100 5/8 INTERNAL TOOTH LOCK W ASHER
7 8 310212 #8 CUSHION CLAMP
8 1 046242 5/8 - 1 1 NC X 1 GRADE 5 BOLT
9 2 046200 1/2 - 13 NC X 2 1/4 GRADE 5 BOL T
10 3 044048 1/2 -13 NC NYLON INSERT NUT
11 8 046015 1/4 - 20 NC X 1” GRADE 5 HEX BOL T
12 8 044023 1/4 - 20 NC NYLON INSERT NUT
13 14 047009 1/4” FLATW ASHER ST AINLESS STEEL
14 8 041023 #10 X 3/8 SELF-TAPPING PLASTIC SCREW
15 1 680180* 3" TOWER WELDMENT MANUAL WINCH
16 1 352017* 2-5/8" MANUAL TOWER WELDMENT FOR REM. LIGHT BAR
17 1 620511 WELDMENT , TOWER SUPPORT
18 2 047030 5/8 FLA T W ASHER (with painted tower)

1 047030 5/ 8 FLA T W ASHER (with galvanized tower)
19 1 044053 5/8 - 1 1 NC NYLON INSERT NUT
20 1 650145 MAST LOCKING BAR
21 1 047025 1/2” PLATED FLAT WASHER
22 1 610531 DLB 1200 BRAKE WINCH - PLA TED
23 1 1/2” NUT (SUPPLIED WITH WINCH)
24 1 WINCH SPRING (SUPPLIED WITH WINCH)
25 1 712032 HANDLE FOR DLB 1200 - 7"
26 3 0461 10 3/8 - 16 NC X 1 GRADE 5 BOL T
27 3 047010 5/16” FLAT WASHER
28 3 044038 3/8 -16 NC NYLON INSERT NUT
29 1 320410 CORD REEL (OPTIONAL)
30 1 320453 3/16” X 1-3/4” ROLL PIN

LEGEND: NS= Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

B-2A

NIGHT-LITE PRO SERIES

MANUAL WINCH TOWER CABLE ROUTING

NIGHT-LITE PRO SERIES

MANUAL WINCH TOWER CABLE ROUTING

NO REQ’D PART NO DESCRIPTION

1 2 620084 WIRE ROPE CLIP 3/16"
2 1 045040 WIRE ROPE THIMBLE, 1/4"
3 1 620076 STEEL CABLE 3/16- X 11'
4 1 650140 MAST WIRING - 14/7 X 324" (STRAIGHT CORD)
5 1 650133 STEEL CABLE 3/16” X 17’9"
6 1 320185 STEEL CABLE 3/16" X 10’
7 1 352016 MAST WIRING - 16/8 X 344" (CORD REEL 4 LIGHT)

650130* MANUAL WINCH TOWER COMPLETE

WITH LIGHT BAR ASSEMBL Y

INSTRUCTIONS FOR REPLACING STEEL CABLES.

3/16" X 1 1'

REMOVE THE CUSHION CLAMPS AND MAST WRING FROM 3" MAST SECTION.
REMOVE THE WIRE ROPE CLIPS A T TOP END OF THE 4" MAST SECTION. REMOVE THE 3" PULLEY A T
THE END OF THE 3" MAST SECTION.
REMOVE THE 2 5/8" ROUND MAST SECTION. REMOVE ALL BROKEN AND FRA YED CABLE. REPLACE
NEW CABLE THROUGH SLOT AND EYELET IN THE ROUND MAST SECTION. REPLACE 2 5/81' ROUND
MAST SECTION IN THE 3" MAST SECTION. ROUTE CABLE THROUGH PULLEY BRACKETS AND INSTALL
3" PULLEY . WITH ALL SECTIONS PUSHED TOGETHER TIGHT, INSERT CABLE THROUGH HALF-LINK AND
REINSTALL WIRE ROPE CLIPS. REINST ALL CUSHION CLAMPS AND MAST WIRING ON THE 3” MAST
SECTION.

B-2B

3/16" X 17’9"

REMOVE MAST WRING FROM BALLAST COMP ARTMENT (SEE ELECTRICAL SCHEMA TIC)
REMOVE THE CUSHION CLAMPS AND MAST WIRING FROM 4" MAST SECTION.
REMOVE STOP BOL T AND WASHER.
REMOVE 4 TOWER P ADS AND 3" PULLEY A T THE END OF THE 4" MAST SECTION.
REMOVE THE 2 5/8" ROUND AND 3" MAST SECTIONS TOGETHER.
REMOVE ALL BROKEN AND FRAYED CABLE.
REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE 3" MAST SECTION AND
THROUGH PULLEY BRACKETS.
REPLACE 2 5/8" ROUND AND 3" MAST SECTIONS.
REPLACE 3" PULLEY AND 4" TOWER P ADS.
ATTACH CABLE TO WINCH AND WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT.
REPLACE STOP BOL T AND W ASHER.
REPLACE CUSHION CLAMPS AND MAST WIRING ON 4" MAST SECTION.
REPLACE MAST WIRING IN BALLAST COMP ARTMENT. (SEE ELECTRICAL SCHEMATIC)

3/16" X 10’

REMOVE AL L BROKEN AND FRA YED CABLE. FEED NEW CABLE THROUGH EYELET IN MAST PIVOT
SECTION.
FEED THROUGH PULLEY BRACKETS AND AROUND PULLEY IN FRONT UPRIGHTS. A TT ACH CABLE TO

WINCH AND WIND IN CLOCKWSE DIRECTION UNTIL ALL SLACK IS OUT.

* Use these codes to designate color needed:

LEGEND: NS= Not Shown
** =Purchase locally

01-White 06-Allmand Gold
02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

B-3A

NIGHT-LITE PRO SERIES

ELECTRIC WINCH TOWER ASSEMBLY

ELECTRIC WINCH MAST PIVOT SECTION ASSEMBLY

NIGHT-LITE PRO SERIES

ELECTRIC WINCH TOWER ASSEMBLY

NO REQ’D PART NO DESCRIPTION

B-3B

1 1 680184* WELDMENT, 4” TOWER, ELECTRIC
2 3 320112 2 1/2" PULLEY W/BUSHING

3 2 320110 3" PULLEY
4 1 620579 LOCK SPRING
5 1 620577 LOCK HANDLE
6 1 620550 LOCKING KNOB 1/2 - 13 NC X 2 1/8”
7 2 650110 PLASTIC TOWER PAD, .312
8 1 352280 PLASTIC TOWER PAD 5/16 SHORT
9 1 043100 5/8 INTERNAL TOOTH LOCK W ASHER
10 1 046242 5/8 - 11 NC X 1 GRADE 5 BOLT
11 8 022022 #8 CUSHION CLAMP
12 1 090309 SPRING LA TCH RELEASE DECAL
13 5 046200 1/2 - 13 NC X 2 1/4 GRADE 5 BOL T
14 5 044048 1/2 - 13 NC NYLON INSERT NUT
15 2 046110 3/8 - 16 NC X 1 GRADE 5 BOL T
16 2 044080 3/8 - 16 NC TOPLOCK NUT
17 2 046105 3/8 - 16 NC X 3/4 GRADE 5 BOL T
18 2 043070 3/8 INTERNAL T OOTH LOCK W ASHER
19 1 046438 1/4” X 3” QUICK RELEASE PIN
20 1 712061 STEEL LANY ARD
21 4 046010 1/4 - 20 NC X 3/4 GRADE 5 BOL T
22 9 044023 1/4 - 20 NC NYLON INSERT NUT
23 8 046015 1/4 - 20 NC X 1” GRADE 5 BOLT
24 14 047009 1/4” SS FLAT WASHER
25 8 041023 #10 X 3/8 SELF T APPING PLASTIC SCREW
26 1 680185* 3" ELECTRIC WINCH TOWER WELDMENT
27 1 352050* REMOVEABLE LIGHT BAR 2 5/8” ROUND TOWER WELDMENT
28 1 320410* CORD REEL (used on cord reel towers only)
29 1 320453 3/16 X 1 3/4 ROLL PIN (used on cord reel towers only)

ELECTRIC WINCH MAST PIVOT SECTION ASSEMBLY

NO REQ’D PART NO DESCRIPTION

1 1 620570* TOWER SUPPORT WELDMENT, ELECTRIC WINCH
2 1 620545 3/4 PLA TED HAIRPIN CLIP
3 1 352168 MAST LOCKING BAR, ELECTRIC WINCH
4 1 620550 LOCKING KNOB 1/2 - 13 NC X 2 1/8”
5 2 047055 1” NARROW RIM PLA TED MACHINE BUSHING
6 1 047025 1/2” PLATED FLAT WASHER
7 1 044048 1/2 - 13 NC NYLON INSERT NUT

* Use these codes to designate color needed:

LEGEND: NS= Not Shown
** =Purchase locally

01-White 06-Allmand Gold
02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

B-4A

NIGHT-LITE PRO SERIES

ELECTRIC WINCH STRAIGHT CORD TOWER CABLE ROUTING

NIGHT-LITE PRO SERIES

ELECTRIC WINCH STRAIGHT CORD TOWER CABLE ROUTING

NO REQ’D PART NO DESCRIPTION

1 2 620084 WIRE ROPE CLIP 3/16"
2 1 045040 WIRE ROPE THIMBLE, 1/4"
3 1 650438 MAST WIRING - 14/7 X 324" (4-LIGHT)

4 1 320185

5 1 352054 STEEL CABLE 7/32" X 26'

NS 650429* ELECTRIC WINCH, STRAIGHT CORD TOWER COMPLETE

WITH 4-LIGHT LIGHT BAR ASSEMBLY

NS 650343* ELECTRIC WINCH, STRAIGHT CORD TOWER COMPLETE

WITHOUT LIGHT BAR ASSEMBL Y

INSTRUCTIONS FOR REPLACING STEEL CABLES

3/16 X 10'

REMOVE THE CUSHION CLAMPS AND MAST WIRING FROM 3" MAST SECTION.
REMOVE LIGHT BAR BY REMOVING 4 NUTS ON BAR AND LA Y BAR ON GROUND.
REMOVE THE WIRE ROPE CLIPS A T T OP END OF THE 4" MAST SECTION.
REMOVE THE 3" PULLEY A T THE END OF THE 3" MAST SECTION.
REMOVE THE 2 5/8" ROUND MAST SECTION.
REMOVE ALL BROKEN AND FRAYED CABLE.
REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE ROUND MAST SECTION.
REPLACE 2 5/8" ROUND MAST SECTION IN THE 3" MAST SECTION.
ROUTE CABLE THROUGH PULLEY BRACKETS AND INSTALL 3" PULLEY.
WITH ALL SECTIONS PUSHED TOGETHER TIGHT, INSERT CABLE THROUGH HALF-LINK
AND REINST ALL WIRE ROPE CLIPS.
REINST ALL CUSHION CLAMPS AND MAST WIRING ON THE 3" MAST SECTION.

B-4B

7/32 X 26'

REMOVE CABLE FROM WINCH.
REMOVE MAST WIRING FROM BALLAST COMP ARTMENT (SEE ELECTRICAL SCHEMA TIC)
REMOVE TOWER ASSEMBL Y FROM TRAILER.
REMOVE STOP BOL T AND WASHER.
REMOVE 4 NYLON ROLLERS AND 3" PULLEY AT T OP END OF 3" SQUARE SECTION.
REMOVE THE 2 5/8" ROUND AND 3" MAST SECTIONS TOGETHER.
REMOVE 2 1/2" PULLEY FROM END OF 4" SECTION.
REMOVE ALL BROKEN AND FRAYED CABLE.
REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE 3" MAST SECTION AND
THROUGH PULLEY BRACKETS.
REPLACE 2 5/8" ROUND AND 3" MAST SECTIONS.
REPLACE 3" PULLEY AND 4 NYLON ROLLERS.
REPLACE STOP BOL T AND W ASHER.
RUN NEW CABLE ON OUTSIDE OF 4" SECTION.
REPLACE 2 1/2" PULLEY.
REPLACE TOWER ASSEMBL Y ON TRAILER.
REPLACE MAST WIRING IN BALLAST COMP ARTMENT. (SEE ELECTRICAL SCHEMATIC)
RUN NEW CABLE THROUGH PULLEY BRACKETS IN FRONT OF TRAILER.
A TT ACH CABLE TO ELECTRIC WINCH.
WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT.

* Use these codes to designate color needed:

LEGEND: NS= Not Shown
** = Purchase locally

01-White 06-Allmand Gold
02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

B-5A

NIGHT-LITE PRO SERIES

4-LIGHT REMOVABLE LIGHT BAR ASSEMBLY

11

NIGHT-LITE PRO SERIES

4-LIGHT REMOVABLE LIGHT BAR ASSEMBLY

B-5B

N O REQ’D PART NO DESCRIPTION

352042* LIGHT BAR ASSEMBL Y, 4-LIGHT
1 10 ** 1/4 - 20 NC X 1/2 CARRIAGE BOL T
2 4 ** 3/4 - 10 NC NYLON INSERT NUT
3 8 ** 3/4 FLA T W ASHER
4 1 620537* LIGHT BAR COVER PLATE
5 1 650319* LIGHT BAR FRAME ONLY
6 10 ** 1/4 - 20 NC KEPS NUT
7 1 310033 CORD GRIP NUT - MET AL
7A 1 022039 1/2" BUSHING
8 4 ** 5/16 - 18 NC KEPS NUT
9 1 71 1029 LOCKING HOLE PLUG
10 4 310414 LAMP CONNECTOR, FEMALE

NS 022020 3/8” 2 SCREW ROMEX CLAMP

11 1 620514* 2 5/8 ROUND TOWER SECTION (Manual removeable light bar)

1 352050* 2 5/8 ROUND TOWER SECTION (Electric removeable light bar)

LEGEND: NS = Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-1A

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NO REQ’D PART NO DESCRIPTION

2 1 650235 SIDE CRANK JACK, SNAP RING (SHOWN)

1 680558 SIDE CRANK JACK, TUBE MOUNT (NOT SHOWN)
1 680879 TOP CRANK JACK, TUBE MOUNT (NOT SHOWN)

1 330013 JACK LOCK PIN (USE WITH 680558 and 680879)
3 1 330014 JACK SNAP RING 2 5/16 XT (USE WITH 650235)
4 2 049040 SAFETY CHAIN SET
6 2 650297 FENDER, MOLDED BLACK
7 2 712116* SPOKE WHEEL
8 10 047010 5/16 FLA T W ASHER
9 10 044031 5/16 - 16 NC KEPS NUT
10 2 650387* SPOKE WHEEL AND 13" TIRE
11 1 650100 AXLE ASSEMBL Y
12 1 032026 AXLE MOUNTING HARDWARE KIT
13 10 046050 5/16 - 18 NC X 1 CARRIAGE BOLT
14 1 024002 12 VOLT BA TTERY
15 1 713098 NEGATIVE BA TTERY CABLE - 36"

1 027025 NEGATIVE BA TTERY CABLE - 48" (PERKINS)
16 1 027025 POSITIVE BA TTERY CABLE - 48"
17 2 044031 5/16 -18 NC NYLON INSERT NUT
18 1 340017 NYLON BA TTERY HOLD DOWN
19 2 433507 J-BOL T 5/16 X 11 “
20 330012A JACK HOLE PIN KIT
21 650169 COUPLING KIT
NS 712111B BEARING SET
NS 712111 AXLE HUB (INCLUDES RACES AND BEARING SET)
NS 330009 JACK MOUNTING BRACKET WITH SNAP RING
NS 650236 PLASTIC JACK CAP

C-1B

LEGEND: NS= Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-1C

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

13

12

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NO REQ’D PART NO DESCRIPTION

1 1 650235 SIDE CRANK JACK, SNAP RING (SHOWN)

1 680558 SIDE CRANK JACK, TUBE MOUNT (NOT SHOWN)
1 680879 TOP CRANK JACK, TUBE MOUNT (NOT SHOWN)
1 330013 JACK LOCK PIN (USE WITH 680558 and 680879)

1 330014 JACK SNAP RING 2 5/16 XT (USE WITH 650235)
2 2 046250 5/8 -1 1 NC X 4 1/2 GRADE 5 BOLT
3 2 046160 7/16 -14 NC X 1 1/2 GRADE 5 BOL T
4 2 049040 SAFETY CHAIN WITH S HOOK AND KEEPER
5 2 044061 5/8 -11 NC TOPLOCK NUT
6A 1 712540-20 HITCH CHANNEL WITH PINTLE

(After Nov . 1, 2004 S/N 0273PRO05 Cast Galvanized)
7 2 046220 1/2 -13 INC X 4 GRADE 5 BOL T
8 1 712021 BALL COUPLER ONLY
9 2 044062 1/2 -13 NC TOPLOCK NUT
10 4 047015 3/8 FLAT W ASHER
11 2 044043 7/16 -14 NC NYLON LOCK NUT

12 2 712552 HITCH PLA TE

13 650398-20 REMOVEABLE TONGUE/SNAP RING
NS 651225-20 REMOVEABLE TONGUE/TUBE MOUNT

(After Sept. 25, 2006 S/N 2310PRO006)

C-1D

LEGEND: NS= Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

C-2A

ISUZU 3LB1

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

ISUZU 3LB1

NO REQ’D PART NO DESCRIPTION

1 2 330012 REPLACEMENT HANDLE
2 2 330010 LONG JACK
3 2 330014 JACK SNAP RING 2 5/16 XT
4 2 650115* OUTRIGGER (LEFT AND RIGHT)
5 8 047009 1/4FLATW ASHER ST AINLESS STEEL
6 4 044023 1/4-20 NC NYLON INSERT NUT
7 2 041075 5/16-18 NC X 3/4 SELF-TAPPING SCREW
8 4 044036 3/8-16 NC KEPS NUT
9 12 047010 5/16 FLAT W ASHER
10 1 @@ RADIA T OR
11 1 ** RADIA TOR CAP
12 2 650129 TAIL LIGHT
13 4 046110 5/16-18 NC X 1 GRADE 5 BOLT
14 1 650112* REAR TOWER SUPPORT
15 1 045145 1/4 X 1 1/2 ROLL PIN
16 1 330450 REAR TOWER SUPPORT PIN
17 1 650210* REAR P ANEL, ISUZU 1” R
18 4 046010 1/4-20 NC X 3/4 STAINLESS STEEL BOLTS
19 1 330012A REPLACEMENT JACK HOLE PIN KIT
20 6 045110 3/16 ALUMINUM RIVET
21 4 044033 5/16 - 18 NC NYLON INSERT NUT
22 4 046050 5/16 - 18 X 1 GRADE 5 BOLT
23 1 650722 LEFT OUTRIGGER RETENTION PIN
24 1 650723 RIGHT OUTRIGGER RETENTION PIN

C-2B

LEGEND: NS= Not Shown

** = Purchase locally

@@ = Contact local Isuzu Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-2C

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

KUBOTA D905-BG

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

KUBOTA D905-BG

NO REQ’D PART NO DESCRIPTION

C-2D

1 2 330012 REPLACEMENT HANDLE
2 2 330010 LONG JACK
3 2 330014 JACK SNAP RING 2 5/16 XT
4 2 650115* OUTRIGGER (LEFT AND RIGHT)
5 1 920472 COOLANT OVERFLOW T ANK
6 8 047009 ¼” FLATWASHER
7 4 044023 1/4-20 NC NYLON INSERT NUT
8 2 041075 5/16-18 NC X 3/4 SELF-TAPPING SCREW
9 4 044036 3/18-16 NC KEPS NUT

10 14 047010 5/16 FLAT W ASHER

11 1 Call Factory RADIA T OR
12 1 ** RADIA TOR CAP
13 2 650129 TAIL LIGHT
14 4 046110 3/8 - 16 NC X 1 GRADE 5 BOL T
15 1 650112* REAR TOWER SUPPORT
16 1 045145 1/4 X 1 1/2 ROLL PIN
17 1 330450 REAR TOWER SUPPORT PIN
18 1 650283* REAR P ANEL, 1 “ R
19 4 046010 1/4-20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL
20 1 330012A REPLACEMENT JACK HOLE PIN
21 2 ** CABLE TIE
22 6 045110 3/16 ALUMINUM RIVET
23 4 044033 5/16 -18 NC NYLON INSERT NUT
24 4 046050 5/16-18 X 1 GRADE 5 BOLT

25 1 650722 LEFT OUTRIGGER RETENTION PIN
26 1 650723 RIGHT OUTRIGGER RETENTION PIN

LEGEND: NS= Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-2E

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

PERKINS 103.10/LOMBARDINI LDW 903

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

C-2F

PERKINS 103.10/LOMBARDINI LDW 903

NO REQ’D PART NO DESCRIPTION

1 330012 REPLACEMENT HANDLE
2 2 330010 LONG JACK
3 2 330014 JACK SNAP RING 2 5/16 XT
4 2 650115* OUTRIGGER (LEFT AND RIGHT)
5 8 047009 ¼” FLAT WASHER
6 4 044023 1/4-20 NC NYLON INSERT NUT
7 2 041075 5/16-18 NC X 3/4 SELF-TAPPING SCREW
8 10 047010 5/16 FLAT W ASHER
9 2 650129 TAIL LIGHT
10 1 650112* REAR TOWER SUPPORT
11 1 045145 1/4 X 1 1/2 ROLL PIN
12 1 330450 REAR TOWER SUPPORT PIN
13 1 650283* REAR PANEL, 1 “ R PERKINS/CA T

1 650767* REAR P ANEL, 1 “ R LOMBARDINI
14 4 046010 1/4-20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL
15 1 330012A REPLACEMENT JACK HOLE PIN KIT
16 6 045110 3/16 ALUMINUM RIVET
17 4 044033 5/16 -18 NC NYLON INSERT NUT
18 4 046050 5/16 - 18 X 1 GRADE 5 BOLT
19 1 650722 LEFT OUTRIGGER RETENTION PIN
20 1 650723 RIGHT OUTRIGGER RETENTION PIN

LEGEND: NS= Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-2G

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

REAR PANEL WITH TOWER LIMIT SWITCH

CABLE ELECTRIC ONLY

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

REAR PANEL WITH TOWER LIMIT SWITCH

C-2H

CABLE ELECTRIC ONLY

NO REQ’D PART NO DESCRIPTION

1 1 650435 REAR LIMIT SWITCH
2 1 650432 REAR LIMIT SWITCH WIRING HARNESS
3 1 022136 5/8 SNAP BUSHING
4 1 650434-15 LIMIT SWITCH ACTUA TOR CAM
5 1 330450 REAR TOWER SUPPORT PIN
6 1 045145 1/4 X 1 1/2 ROLL PIN
7 1 022020 2-SCREW ROMEX CLAMP, 3/8
8 1 650112* REAR TOWER SUPPORT
9 3 022016A 3/8 CUSHION CLAMP (BOL T HOLE 3/8)
10 1 022016 3/8 CUSHION CLAMP (BOLT HOLE 1/4)
11 1 650433* REAR LIMIT SWITCH COVER
12 1 046040 1/4 - 20 NC X 5 GRADE 5 BOLT
13 2 041006 #6 - 32 X 1 1/4 BOLT
14 2 046110 3/8 - 16 NC X 1 1/4 GRADE 5 BOLT
15 1 046050 5/16 - 18 NC X 1 GRADE 5 BOLT
16 4 047010 5/16 FLAT W ASHER
17 2 044036 3/8- 16 NC KEPS NUT
18 1 044033 5/16 -18 NC NYLON INSERT NUT
19 2 044023 ¼ -20 NC NYLON INSERT NUT
20 1 046015 ¼ -20 NC X 1 GRADE 5 BOLT
21 1 047009 1/4 STAINLESS STEEL FLAT WASHER
22 2 041017 #6 - 32 NC X 3/8 BOLT
23 2 044004 #6 - 32 NC KEPS NUT
24 2 044004 #6 - 32 NC KEPS NUT
25 1 041050 1/4 - 20 NC X 3/4 PHILLIPS HEAD TRUSS HEAD SCREW

(ST AINLESS STEEL)

26 2 043050 1/4 INTERNAL TOOTH LOCK

LEGEND: NS= Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-2I

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

ISUZU 3LB1

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

ISUZU 3LB1

NO REQ’D PART NO DESCRIPTION

1 1 650267* ISUZU RADIA TOR SUPPORT SHROUD (RIGHT)
2 1 650268* ISUZU RADIA TOR SUPPORT SHROUD (RIGHT)
3 1 @@ ISUZU RADIA TOR WITH SHROUD
4 1 @@ ISUZU RADIA TOR F AN GUARD
5 4 046050 5/16 - 18 NC X 1 GRADE 5 BOL T
6 4 047010 5/16 FLAT WASHER
7 4 044031 5/16 - 18 NC KEPS NUT
8 4 042082 M8 HEXNUT
9 4 042030 M8 X 20 GRADE 8.8 BOL T
10 4 ** M8 FLAT W ASHER
11 4 ** M8 SPLIT LOCK WASHER

C-2J

LEGEND: NS= Not Shown
** =Purchase locally

@@ =Contact local Isuzu Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-2K

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

KUBOTA D905-BG

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

KUBOTA D905-BG

NO REQ’D PART NO DESCRIPTION

1 1 650168 KUBOTA F AN GUARD
2 7 041015 #8 X 5/8 HW TEKS SCREW
3 1 Call Factory RADIATOR

C-2L

LEGEND: NS= Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-3A

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NO REQ’D PART NO DESCRIPTION

1 18 046010 1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT ST AINLESS STEEL
2 32 047009 1/4 STAINLESS STEEL FLA T W ASHER
3 1 650206* RIGHT SIDE FRONT PANEL, 1" R
4 12 044023 1/4 - 20 NC NYLON INSERT NUT
5 1 650207* LEFT SIDE FRONT P ANEL, 1" R
6 8 045216 TINNERMAN FASTENER
7 4 046110 3/8 -16 NC X 1 GRADE 5 BOL T
8 2 046115 3/8 - 16 NC X 1 1/4 GRADE 5 BOLT
9 16 047010 5/16 FLA T WASHER
10 1 650111* TOWER PIVOT
1 1 6 044036 3/8 - 16 NC KEPS NUT
12 1 650113* TOWER/ROOF BRACE
13 1 650266* ROOF PANEL, ISUZU/PERKINS 1” R

1 650277* ROOF PANEL, KUBOT A 1" R W/BOX MUFFLER

1 650565* ROOF PANEL, LOMBARDINI/DEUTZ 1” R
14 4 044033 5/16-18 NC NYLON INSERT NUT
15 2 046010 1/4-20 NC X 1 GRADE 5 BOL T
16 4 046050 5/16-18 NC X 1 GRADE 5 BOL T
17 1 650112* REAR TOWER SUPPORT
18 1 650210* REAR PANEL, ISUZU 1 “R

1 650283* REAR PANEL, KUBOT A/PERKINS 1" R

1 650767* REAR PANEL, LOMBARDINI 1" R
19 2 041021 #10 - 24 NC X 1/2 SCREW
20 2 330481 GROUND ROD CLIP
21 2 044016 #10 - 24 NC KEPS NUT
22 1 340058 GROUND ROD
23 1 640555(NS) BLACK PLUG - 2.0" (PERKINS)
24 1 330037 3" STICK-ON RED REFLECTOR CAL. SPEC.

C-3B

LEGEND: NS= Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-4A

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NO REQ’D PART NO DESCRIPTION

1 2 660170 POSITIVE DOOR HOLDER
2 4 041026 #10 - 24 NC X 3/4 FLAT HEAD SCREW
3 2 650131 LOCKING T-HANDLE
4 16 041021 #10 - 24 NC X 1/2 ROUND HEAD SCREW
5 2 650209* DOOR 1" R, RIGHT AND LEFT
6 4 041027 #10 - 24 NC X 3/4 ROUND HEAD SCREW
8 20 044019 #10 - 24 NC NYLON INSERT NUT
9 2 650211 DOOR HINGE 1" R

2 650425 DOOR HINGE (UNIVERSAL)

10 4 041050 1/4 - 20 NC X 3/4 PHILLIPS HEAD TRUSS HEAD SCREW

(ST AINLESS STEEL)

11 1 650266* ROOF P ANEL. ISUZU/PERKINS 1" R

1 650277* ROOF PANEL, KUBOT A 1" R W/BOX MUFFLER

1 650565* ROOF PANEL, LOMBARDINI/DEUTZ 1” R
12 8 044023 1/4 - 20 NC NYLON INSERT NUT
13 4 041250 1/4-20 x 1/2 SLOTTED HEAD NYLON BINDER SCREW
14 1 650210* REAR PANEL, ISUZU 1" R

1 650283* REAR PANEL, KUBOT A/PERKINS 1" R

1 650767* REAR PANEL, LOMBARDINI 1" R
15 2 650132 LATCH CAM, W/SQ HD SET SCREW
16 1 022035 CORD GRIP NUT
17 1 310033 CORD GRIP
18 1 650206* RIGHT SIDE FRONT PANEL, 1" R
19 1 650207* LEFT SIDE FRONT P ANEL, 1" R
20 4 044016 #10 - 24 NC KEPS NUT
21 16 045110 3/16 STEEL RIVETS
22 1 640555 (NS) BLACK PLUG - 2.0” (PERKINS)
NS 1 650376 NL PRO SOUND ATTENUA TION KIT

C-4B

LEGEND: NS= Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-5A

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NO REQ’D PART NO DESCRIPTION

1 1 022025 3/4 2-SCREW CORD CLAMP
2 2 046036 1/4 - 20 NC X 2 1/2 GRADE 5 BOL T
3 4 310391 28 uFCAPACITOR
4 2 610570* DUAL CAP ACITOR MOUNTING CLAMP

NS 2 650443* DUAL CAP ACIT OR MOUNTING CLAMP (HPS)

5 2 044023 1/4 - 20 NC NYLON INSERT NUT
6 4 310124 TRANSFORMER ONL Y
NS 4 310118 TRANSFORMER, CAPACITOR, AND STARTER (HPS)
7 16 041070 1/4 - 20 NC SELF-TAPPING SCREW
8 1 043050 1/4 INTERNAL TOOTH LOCK WASHER
9 2 ** #6 - 32 NC X 3/4 ROUND HEAD SCREW
10 1 045003 ¼ - 20 NC X 1 1/2 STUD
11 2 650104 25 AMP BREAKER SWITCH
NS 4 330458 15 AMP BREAKER SWITCH (OPTIONAL)
12 3 044021 1/4 - 20 NC KEPS NUT
13 1 330494 1/4 - 20 NC WING NUT
14 4 041017 #6 - 32 NC X 3/8 ROUND HEAD SCREW
15 1 650105 15 AMP POP-OUT CIRCUIT BREAKER
16 1 630132A 120V . GFCI RECEPTACLE

NS 1 330432 RECEPTACLE COVER FOR GFCI RECEPTACLE

17 1 022036 3/4" STEEL LOCKNUT
18 3 433329 5/8 CAP PLUG
NS 330459 C.B. SWITCH, 15 AMP DP
19 1 064035 1 1/2 X 7 GA. CAP PLUG
NS 330490 RECEPT ACLE 240V . 15A
20 1 330458 15 AMP BREAKER SWITCH (CABLE ELECTRIC ONLY)

C-5B

LEGEND: NS= Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-5C

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NO REQ’D PART NO DESCRIPTION

1 15 044016 #10 - 24 NC KEPS NUT
2 7 044014 #10 - 24 NC BRASS HEX NUT
3 11 043015 #10 INTERNAL TOOTH LOCK W ASHER
4 1 310120 BALLAST TERMINAL BOARD
5 7 043015 #10 EXTERNAL TOOTH LOCK WASHER
6 6 041030 #10 - 24 NC X 1 MACHINE SCREW
7 1 041035 #10 - 24 NC X 1 1/4 MACHINE SCREW
8 4 022185 NYLON SP ACER
9 4 041045 #10 - 24 NC X 2 1/2 MACHINE SCREW

C-5D

LEGEND: NS= Not Shown
** =Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-6A

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

GAUGE P ANEL MANUAL WINCH

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

GAUGE P ANEL MANUAL WINCH

NO REQ’D PART NO DESCRIPTION

1 1 920474 IGNITION KEY (EXTRA)

1 650219 IGNITION KEY (ISUZU) P AIR ROUND TYPE
1 922005 IGN ITIO N KE Y (ISUZU) P AIR BLADE TYPE
1 ** IGNITION KEY (PERKINS)

2 1 @@@ GLOW PLUG LAMP

1 @@ GLOW PLUG LAMP (ISUZU)

1 @@@@ GLOW PLUG LAMP (PERKINS)
3 1 340014 HOUR METER
4 3 041078 1/4 - 20 NC X 1/2 ROUND HEAD SCREW
5 1 650125* INSTRUMENT PANEL

1 650196* INSTRUMENT P ANEL (ISUZU)

1 650282* INSTRUMENT P ANEL (PERKINS)
6 1 @@@ GLOW LAMP TIMER
NS 1 @@@@ REGULATOR (PERKINS)
7 6 044021 1/4 - 20 NC KEPS NUT
8 2 043050 1/4 INTERNAL TOOTH LOCK WASHER
9 2 043010 1/4 - 20 NC X 3/4 GRADE 5 BOL T
10 1 920475 KEY SWITCH W/2 KEYS

1 922004 KEY SWITCH W/2 KEYS (ISUZU) BLADE TYPE

1 @@@@ KEY SWITCH W/2 KEYS (PERKINS)
11 1 310212 5/8 CUSHION CLAMP
12 2 041070 1/4 - 20 NC SELF-TAPPING SCREW
13 1 650363* GAUGE P ANEL COVER

C-6B

LEGEND: NS= Not Shown
** = Purchase locally

@@@ = See Kubota Dealer

@@ = See Isuzu Dealer

@@@@ = See Perkins Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-6C

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

GAUGE P ANEL ELECTRIC WINCH

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

GAUGE P ANEL ELECTRIC WINCH

C-6D

NO REQ’D PART NO DESCRIPTION

1 1 920474 IGNITION KEY (EXTRA)

1 650219 IGNITION KEY (ISUZU) PAIR ROUND TYPE
1 922005 IGNITION KEY (ISUZU) PAIR BLADE TYPE
1 ** IGNITION KEY (PERKINS)

2 1 @@@ GLOW PLUG LAMP

1 @@ GLOW PLUG LAMP (ISUZU)

1 @@@@ GLOW PLUG L AMP (PERKINS)
3 1 340014 HOUR METER
4 1 310544 DPDT MOMENTARY CONTACT SWITCH
5 1 352466 2 AMP CIRCUIT BREAKER
6 1 650125* INSTRUMENT P ANEL (KUBOT A)

1 650196* INSTRUMENT PANEL (ISUZU)

1 650282* INSTRUMENT P ANEL (PERKINS)
7 1 @@@ GLOW LAMP TIMER

1 @@@@ REGULATOR (PERKINS)

8 3 041078 1/4 - 20 NC X 1/2 ROUND HEAD SCREW
9 5 044021 1/4 - 20 NC KEPS NUT
10 2 043050 1/4 INTERNAL TOOTH LOCK WASHER
11 2 046010 1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT STAINLESS STEEL
12 1 920475 KEY SWITCH W/2 KEYS

1 922004 KEY SWITCH W/2 KEYS (ISUZU) BLADE TYPE

1 @@@@ KEY SWITCH W/2 KEYS (PERKINS)
13 1 310212 5/8 CUSHION CLAMP
14 2 041070 1/4 - 20 NC SELF-TAPPING SCREW
15 1 650363* GAUGE P ANEL COVER
16 1 630157A BRIDGE ASSEMBL Y
17 1 ** #10 - 24 NC X 3/4 ROUND HEAD SCREW
18 1 044016 #10 - 24 NC KEPS NUT

19 1 022020 2 - SCREW ROMEX CLAMP, 3/8

LEGEND: NS= Not Shown
** = Purchase locally

@@@ = See Kubota Dealer

@@ = See Isuzu Dealer

@@@@ = See Perkins Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-6E

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

GAUGE P ANEL, LOMBARDINI

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

GAUGE P ANEL, LOMBARDINI

NO REQ’D PART NO DESCRIPTION

1 4 041070 1/4 - 20 X 3/4 SELF-TAPPING SCREW
2 1 @@@@@ LOMBARDINI CONTROL BOX

3 1 340014 HOUR METER
4 2 ** M5 X .80mm x 12mm MACHINE SCREW
5 2 043017 #10 INTERNAL TOOTH LOCK WASHER
6 4 044021 1/4 - 20 NC KEPS NUT
7 1 650761 LOMBARDINI CONTROL P ANEL BRACKET
8 1 020021 #10 CUSHION CLAMP

C-6F

LEGEND: NS= Not Shown
** = Purchase locally

@@@@@ = See Lombardini Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-6G

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

PERKINS CONTROL P ANEL

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

PERKINS CONTROL P ANEL

NO REQ’D PART NO DESCRIPTION

3 1 921433 GLOW PLUG LAMP
4 8 044021 1/4 - 20 NC KEPS NUT
5 1 650446 REGULATOR

7 3 041078 1/4 - 20 NC X 1/2 ROUND HEAD SCREW
8 1 340014 HOUR METER
9 1 650282* INSTRUMENT P ANEL, PERKINS KEY

10 1 650307 IGNITION KEY , EXTRA
11 1 650363* GAUGE PANEL COVER
12 2 041070 1/4 - 20 NC SELF-TAPPING SCREW
13 1 310212 5/8 CUSHION CLAMP
14 2 046010 1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT
15 1 650306 KEY SWITCH W/2 KEYS (PERKINS)
16 2 043050 1/4 INTERNAL TOOTH LOCK WASHER

17 1 650302 AUTO SHUTDOWN TIMER

NS 1 650139 30 AMP CIRCUIT BREAKER

C-6H

LEGEND: NS= Not Shown

** = Purchase locally

@@@@ = See Perkins Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-7A

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

FUEL TANK AND MANUAL WINCH

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

FUEL TANK AND MANUAL WINCH

NO REQ’D PART NO DESCRIPTION

1 1 340027 FUEL FILLER CAP
2 1 650108 POLY FUEL TANK 30 GALLON
3 2 650108 1/4 - 20 NC X 1-3/4 GRADE 5 HEX BOL T
4 2 044023 1/4 - 20 NC NYLON INSERT NUT
5 1 650470 WINCH HANDLE
6 1 650469 WINCH EXTENSION TUBE
7 1 660144 WINCH DRIVE HUB
8 1 650106 NYLON WINCH GUIDE
9 3 044021 1/4 - 20 NC KEPS NUT
10 2 041050 1/4 - 20 NC X 3/4 TRUSS HEAD PHILLIPS SCREW
11 4 047010 5/16 FLAT W ASHER
12 2 044031 5/16 - 18 NC KEPS NUT
13 1 610531 WINCH, PLATED
14 1 046200 1/2 - 13 NC X 2 1/4 GRADE 5 BOLT
15 1 320112 2-1/2 PULLEY W/BUSHING
16 1 044048 1/2 -13 NC NYLON INSERT NUT
17 6 047007 1/4-1 1/4 FENDER WASHER
18 6 043050 1/4 INTERNAL TOOTH LOCK WASHER
19 6 046005 1/4 - 20 NC X 1/2 GRADE 5 HEX BOLT
20 1 630555* KICK-OUT SPRING
21 2 046110 3/8 - 16 NC X 1 GRADE 5 BOLT
22 2 044036 3/8 - 16 NC KEPS NUT
23 2 046050 5/16 -18 NC X 1 GRADE 5 BOLT
24 1 650621 KICKOUT SPRING PAD
25 2 045118 1/4” RIVET
26 2 047100 5/16 FLAT W ASHER (ST AINLESS)
27 1 047009 1/4 SAE FLA T W ASHER (STAINLESS)
28 1 046010 1/4 - 20 NC X 3/4 GRADE 5 HEX BOLT
29 1 650136 WINCH HANDLE KIT (INCLUDES #5, 6, &7)

C-7B

LEGEND: NS= Not Shown
** = Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-7C

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

FUEL TANK AND ELECTRIC WINCH

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

FUEL TANK AND ELECTRIC WINCH

NO REQ’D PART NO DESCRIPTION

1 5 046110 3/8 - 16 NC X 1 GRADE 5 BOLT

2 5 047010 5/16 FLAT W ASHER
3 1 352089* KICK-OUT SPRING
4 1 340027 FUEL FILLER CAP
5 1 650108 POLY FUEL TANK
6 2 047010 1/4 20 NC X 1/2 CARRIAGE BOLT
7 1 046200 1/2 - 13 NC X 2 1/4 GRADE 5 BOLT
8 1 044048 1/2 - 13 NC NYLON INSERT NUT

9 1 320112 2 1/2 PULLEY W/BUSHING
10 2 044021 1/4 - 20 NC KEPS NUT
11 1 352056* SLACK LIMIT SWITCH BRACKET
12 5 044036 3/8 - 16 NC KEPS NUT
13 1 466093 SLACK LIMIT SWITCH

14 2 041006 #6 - 32 NC X 1 1/4 ROUND HEAD SCREW
16 2 044006 #6 - 32 NC KEPS NUT
17 1 630157 STRONG ARM ELECTRIC WINCH
17 A 1 EMERGENCY WINCH HANDLE
18 6 047007 1/4 X 1 1/4 FENDER WASHER
19 6 046005 1/4 - 20 NC X 1/2 GRADE 5 BOLT
20 6 043050 1/4 INTERNAL TOOTH LOCK WASHER
21 1 650431* ELECTRIC WINCH COVER
22 1 022019 CUSHIONED CLAMP 7/8
23 4 041075 5/16 - 18 NC SELF-TAPPING SCREW
23 6 044023 1/4 - 20 NC NYLON INSERT NUT
NS 1 081016 1/4 FUEL HOSE 48”
NS 1 081005 NYLON RETURN FUEL HOSE, 36”

C-7D

LEGEND: NS= Not Shown
** = Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-8A

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NO REQ’D PART NO DESCRIPTION

1 2 650263 AIR CLEANER BAND
2 6 044031 5/16 -18 NC KEPS NUT
3 4 042027 8mm X 20mm X 1.25 GRADE 10.9 BOLT
4 3 045038 HOSE CLAMP #32
5 1 650272 AIR INT AKE HOSE
6 3 ** 5/16 INTERNAL T OOTH LOCK WASHER
7 1 ** 1/4 FLA T W ASHER
8 1 650291* AIR CLEANER MOUNT BRACKET , PRO
10 8 046050 5/16-18 NC X 1”GRADE 5 BOLT
11 1 022025 2-SCREW ROMEX CONNECTOR 3/4
NS 1 022036 3/4" STEEL LOCKNUT
12 1 ** CAP PLUG
13 1 920745 KUBOTA FUEL FILTER
14 1 046055 5/16 - 18 NC X 1 1/4 GRADE 5 BOLT
15 1 @@@ FUEL FIL TER MOUNTING PLA TE
16 4 046134 3/8 - 16 NC X 2 1/2 GRADE 5 BOLT
17 2 650114* ENGINE MOUNT
18 9 042038 10mm X 20mm X 1.25 GRADE 8.8 BOLT
19 1 046050 5/16 - 18 NC X 1 GRADE 5 BOLT
20 2 047009 5/16 FLAT W ASHER

C-8B

LEGEND: NS= Not Shown
** = Purchase locally

@@@ = See local Kubota Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

TRAILER ASSEMBLY PARTS AND ACCESSORIES

C-8A CONT.

NIGHT-LITE PRO SERIES

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

C-8B CONT.

NO REQ’D PART NO DESCRIPTION

21 1 340105 GROUND STRAP
22 8 650274 ENGINE MOUNT WASHER
23 4 650259 RUBBER ENGINE MOUNT
24 2 046110 3/8 - 16 NC X 1” GRADE 5 BOL T
25 4 044038 3/8 -16 NC NYLON INSERT NUT
26 1 330463 RUBBER GROMMET
27 2 043065 3/8 SPLIT LOCK WASHER
28 1 650265* GENERA TOR MOUNT
29 1 920743 KUBOTA OIL FIL TER
30 8 047016 3/8 FLA T W ASHER S.A.E.
31 4 043055 5/16 SPLIT LOCK WASHER
32 4 042018 6mm X 10mm X 1.0 GRADE 8.8 BOLT
NS 1 651232 MUFFLER
33 1 352139 KUBOTA BOX MUFFLER KIT
34 1 650262 AIR CLEANER
36 2 043055 5/16 SPLIT LOCK W ASHER
38 1 046105 3/8 - 16 NC X 3/4 GRADE 5 BOL T
39 1 352135 EXHAUST MANIFOLD MUFFLER GASKET
40 4 650260 SNUBBING WASHER
41 8 044033 5/16-18 NC NYLON INSERT NUT
42 8 047010 5/16 FLA T W ASHER
43 1 650289 BOX MUFFLER EXHAUST PIPE
44 1 650296 BOX MUFFLER EXHAUST PIPE BRACKET
45 1 713086 1-3/8 MUFFLER CLAMP (for box muffler ex. pipe)
NS 1 340036 REPLACEMENT AIR FIL TER
NS 1 081018 5/16 FUEL LINE 14"
NS 1 081018 5/16 FUEL LINE 10"
NS 1 650154 UPPER RADIAT OR HOSE
NS 1 650153 LOWER RADIAT OR HOSE
NS 1 650171 ENGINE MOUNT SP ACER_

LEGEND: NS= Not Shown
** = Purchase locally

@@@ = See local Kubota Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-8C

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

ISUZU/PERKINS ENGINE/GENERA TOR ASSEMBL Y

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

ISUZU/PERKINS ENGINE/GENERA TOR ASSEMBL Y

NO REQ’D PART NO DESCRIPTION

1 1 650191 ISUZU 3LB1

1 352160 PERKINS 103.10

2 1 650264 AIR CLEANER BRACKET

1 @@@@ AIR CLEANER BRACKET

3 1 650263 AIR CLEANER POLYMER BAND CLAMP

@@@@ AIR CLEANER POLYMER BAND CLAMP

4 1 650262 AIR CLEANER ASSEMBL Y

@@@@ AIR CLEANER ASSEMBL Y

5 1 ** AIR CLEANER INLET HOSE

@@@@ AIR CLEANER INLET HOSE
6 2 045038 #32 HOSE CLAMP
7 2 650114* ENGINE MOUNT FOOT (ISUZU)

2 650281* ENGINE MOUNT FOOT (PERKINS)
8 4 650259 RUBBER ENGINE MOUNT
9 1 650265* GENERA TOR MOUNT PLA TE
10 10 046050 5/16 -18 NC X 1 GRADE 5 BOLT
11 8 047010 5/16 FLA T W ASHER
12 8 044033 5/16-18 NC NYLON INSERT NUT
13 2 044031 5/16-18 NC KEPS NUT
14 4 046134 3/8-16 NC X 2.5 GRADE 8 BOL T
15 4 047015 3/8 FLA T W ASHER
16 4 650274 ENGINE MOUNT WASHER
17 4 650260 SNUBBING WASHER
18 4 044038 3/8 -16 NC NYLON INSERT NUT
19 8 042038 M 10 X 20 GRADE 8.8 BOLT

8 ** M12-1.25 X 20 GRADE 10.9 BOL T (PERKINS)
20 2 047016 3/8FLA T W ASHER S.A.E.

NS 650220 ISUZU FUEL FIL TER
NS 650221 ISUZU OIL FIL TER
NS 920878 ISUZU GLOW PLUGS

C-8D

LEGEND: NS= Not Shown
** = Purchase locally

@@@ = See local Isuzu Dealer

@@@@ = See local Perkins Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

TRAILER ASSEMBLY PARTS AND ACCESSORIES

C-8C CONT.

NIGHT-LITE PRO SERIES

ISUZU/PERKINS ENGINE/GENERA TOR ASSEMBL Y

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

ISUZU/PERKINS ENGINE/GENERA TOR ASSEMBL Y

NO REQ’D PART NO DESCRIPTION

21 2 046110 3/8 - 16 NC X 1” GRADE 5 BOL T
22 2 043065 3/8 SPLIT LOCK WASHER
23 2 042027 M8 X 16 GRADE 5 BOL T
24 7 043055 5/16 SPLIT LOCK WASHER
25 1 042082 M8 HEX NUT
26 NS 081016 1/4 FUEL HOSE
27 NS 081005 NYLON RETURN FUEL HOSE
28 NS @@@ UPPER RADIATOR HOSE

NS @@@@ UPPER RADIA TOR HOSE

29 NS @@@ LOWER RADIA TOR HOSE

NS @@@@ LOWER RADIA TOR HOSE

30 NS @@@ EXHAUST MANIFOLD MUFFLER GASKET

NS @@@@ EXHAUST MANIFOLD MUFFLER GASKET

31 NS 650225 MUFFLER PRO - ISUZU

NS 651232 MUFFLER - CAT

32 NS @@@ M8 X 25 GRADE 8.8 BOLT

C-8D CONT.

LEGEND: NS= Not Shown
** = Purchase locally

@@@ = See local Isuzu Dealer

@@@@ = See local Perkins Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-8E

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

LOMBARDINI ENGINE/GENERA TOR ASSEMBLY

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

LOMBARDINI ENGINE/GENERA TOR ASSEMBL Y

NO REQ’D PART NO DESCRIPTION

1 1 650592 GENERAT OR 6 KW PG

100350 GENERATOR 7.5 KW MECC ALTE
2 4 046134 3/8-16 NC X 2.5 GRADE 8 BOL T
3 4 047015 3/8 FLA T W ASHER
4 1 650563* GENERA TOR MOUNT PLA TE
5 8 046050 5/16 -18 NC X 1 GRADE 5 BOLT
6 4 650259 RUBBER ENGINE MOUNT
7 8 044033 5/16-18 NC NYLON INSERT NUT
8 4 650260 SNUBBING WASHER
9 4 044038 3/8 -16 NC NYLON INSERT NUT
10 4 650274 ENGINE MOUNT WASHER
11 8 047010 5/16 FLAT W ASHER
12 2 046095 3/8-16 NC X 1/2 GRADE 5 BOLT
13 2 043065 3/8 SPLIT LOCK WASHER
14 2 047008 1/4 SS FLAT W ASHER
15 1 650562-01 ENGINE MOUNT BRACKET
16 6 042018 6MM X 16MM X 1.0 GRADE 8.8 BOL T
17 2 650567-01 RADIATOR SHROUD
18 4 044021 1/4-20 NC KEPS NUT
19 4 041078 1/4-20 X 1/2 TRUSS HEAD BOLT
20 1 650830 LOMBARDINI LDW 903 ENGINE
21 1 651236 MUFFLER
NS 1 081016 FUEL LINE 48”
NS 1 081005 NYLON RETURN LINE 55”
NS 1 ** GAUGE P ANEL ENGINE HARNESS ASSEMBLY
NS 1 ** ENGINE WIRING HARNESS ONL Y

C-8F

LEGEND: NS= Not Shown
** = Purchase locally

@@@@@ = See local Lombardini Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-8G

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

301 1C CA T ENGINE/GENERA TOR ASSEMBL Y WITH REAR EXHAUST EXIT

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

301 1C CA T ENGINE/GENERA TOR ASSEMBL Y WITH REAR EXHAUST EXIT

NO REQ’D PART NO DESCRIPTION

1 1 352097 CAT 3011C D RATE 6KW ENGINE

1 352236 CAT 301 1C NON-D RA TE 8KW ENGINE
2 1 651 164 CAT 3011C REAR PANEL, PRO, REAR EXHAUST
3 1 650851 CA T 301 1C MUFFLER BY ST ANLEY
4 1 650850 STANLEY MUFFLER, 10” T AILPIPE
5 1 651 166 MUFFLER BRACKET , CAT 3011C, REAR EXHAUST
6 4 042027 8MM X 16MM X 1.25 HEX BOL T
7 8 043055 5/16” PLATED SPLIT LOCK W ASHERS
8 4 042031 8MM X 25MM X 1.25 HEX BOL T
9 1 340112-2 1-1/2” MUFFLER CLAMP BASE
10 1 3401 12-3 1-1/2” MUFFLER CLAMP BOL T
11 2 043065 3/8” SPLIT LOCK WASHER
12 2 044035 3/8-16 PLATED HEX NUT
13 2 ** CAT 301 1C MUFFLER GASKET
14 1 ** CAT 3011C MUFFLER SP ACER

1 651012 GENERATOR MOUNT

651012 6KW BALDOR GENERA TOR
640144 8KW BALDOR GENERA TOR

C-8H

LEGEND: NS= Not Shown
** = Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

C-8I

NIGHT-LITE PRO SERIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

TRAILER ASSEMBLY PARTS AND ACCESSORIES

NO REQ’D PART NO DESCRIPTION

NIGHT-LITE PRO SERIES

C-8J

1 1 650398* REMOVABLE TONGUE WELDMENT
2 2 046230 1/2-13 NC x 5" GRADE 8 BOLT
3 4 047025 ½ FLAT W ASHER
4 2 044048 1/2-13 NC NYLON INSERT HEX NUT

LEGEND: NS= Not Shown
** = Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

NIGHT-LITE PRO SERIES

THIS PAGE LEFT BLANK INTENTIONALLY

NIGHT-LITE PRO SERIES

DECALS

REQ’D PART NO DESCRIPTION

1 090165 DECAL - DANGER ELECTRIC SHOCK
1 090177 ALIGNMENT ARROW
1 090034 DECAL - DIESEL
1 090166 DECAL - W ARNING OVERHEAD HAZARD
1 090284 STRIPE DECAL SET
2 090276 NIGHT-LITE DECAL
1 090159 DECAL - W ARNING COMBUSTIBLE GAS
1 090160 DECAL - W ARNING EXCESS TOW
1 090139 DECAL - LA TCH/UNLATCH
1 090133 DECAL - GROUND LUG
1 090158 DECAL - W ARNING OPERA TOR’S MANUAL
1 090084 DECAL - W ARNING SHUT OFF LIGHTS
2 090278 PRO SERIES DECAL
1 090288 STARTING ENGINE, ISUZU & PERKINS
1 090224 STARTING ENGINE, KUBOT A
1 090225 PRO PICTORIAL INSTRUCTION
1 090163 DECAL - DANGER ELECTIC SHOCK
1 090226 DECAL -W ARNING ROLL OVER PROTECTION
2 090002 DECAL - DANGER HIGH VOL T AGE
1 090164 DECAL - W ARNING NON-VERTICAL
1 090240 DECAL - W ARNING FOLD OUTRIGGERS

650158 DECAL SET COMPLETE - PRO
2 090256 LARGE ALLMAND DOOR DECAL
1 090269 SMALL ALLMAND REAR PANEL DECAL
1 090262 ELECTRIC WINCH PICTORIAL OPERA TOR (Elec. Winch Only)
1 090205 DECAL - RED LA TCH (Elec. Winch Only)
1 090232 DECAL -ELECTRIC WINCH W ARNING (Elec. Winch Only)
1 090179 DECAL PROPOSITION 65 DIESEL
1 090309 DECAL-SPRING LA TCH RELEASE

D-1A

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

E-1A

NIGHT-LITE PRO SERIES

KUBOT A D905-BG

NIGHT-LITE PRO SERIES

KUBOT A D905-BG

REF# PART NO DESCRIPTION

1 Call Factory RADIA TOR
2 340302 HIGH TEMPERATURE SWITCH
4 650262 AIR CLEANER
5 650114* ENGINE MOUNT BRACE (LEFT)

650114* ENGINE MOUNT BRACE (RIGHT)
6 920743 KUBOTA OIL FILTER
7 340301 OIL PRESSURE SWITCH

NS 340304 KUBOT A D905-BG ENGINE
NS 640146 MARA THON 6KW GENERA TOR

NS 640157 MARA THON 8KW GENERA TOR (KUBOT A 1 105 ONL Y)

NS 650592 POWRGARD 6KW GENERA TOR
NS 640167 LEROY SUMER 50HZ 6KW GENERA TOR
NS 920745 FUEL FIL TER
NS 081016 1/4 FUEL LINE 48"
NS 081005 NYLON RETURN LINE 55"
NS @@@ MUFFLER KIT
NS 650134 ENGINE WIRING HARNESS

(SEE WIRE SCHEMA TIC F-1A)
NS 650265* GENERA TOR MOUNT PLA TE
NS 650290 REPLACEMENT AIR FILTER ELEMENT

E-1B

FOR ENGINE P ARTS NOT SHOWN, SEE KUBOT A D905 P ARTS LIST. FOR GENERA TOR
P ARTS NOT SHOWN, SEE MANUFACTURER’S LIST OR CALL 800-562-1373 FOR ASSIS­TANCE.

LEGEND: NS= Not Shown
** = Purchase locally

@@@ = See local Kubota Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

E-2A

NIGHT-LITE PRO SERIES

ISUZU 3LB1

NIGHT-LITE PRO SERIES

ISUZU 3LB1

REF# PART NO DESCRIPTION

NS @@ RADIATOR

1 @@ HIGH TEMPERATURE SWITCH
NS 650261 ISUZU AIR CLEANER BRACKET
NS 650262 ISUZU AIR CLEANER
NS 650263 ISUZU AIR CLEANER BAND CLAMP
NS @@ ISUZU AIR CLEANERAIR INLET HOSE
NS 650114* ENGINE MOUNT BRACE (LEFT)

650114* ENGINE MOUNT BRACE (RIGHT)

2 650221 ISUZU OIL FIL TER
NS 650220 ISUZU FUEL FIL TER
NS 920878 ISUZU GLOW PLUG

3 @@ OIL PRESSURE SWITCH

4 650191 ISUZU 3LB1 ENGINE (INCLUDES RAD. AND SHROUD)
NS 640146 MARATHON 6KW GENERA TOR
NS 650592 POWRGARD 6KW GENERA TOR
NS 640167 LEROY SUMER 50HZ 6KW GENERA TOR
NS 081016 1/4 FUEL LINE 48"
NS 081005 NYLON RETURN LINE 55"
NS 650225 MUFFLER KIT
NS 650240 ISUZU ENGINE WIRING HARNESS

(SEE WIRE SCHEMA TIC F-2A)

NS 650265* GENERA TOR MOUNT PLA TE (ISUZU-NEW MOUNTS)

E-2B

FOR ENGINE P ARTS NOT SHOWN, SEE ISUZU 3LB1 P ARTS LIST. FOR GENERA TOR
P ARTS NOT SHOWN, SEE MANUFACTURES LIST OR CALL 800-562-1373 FOR ASSIS­TANCE.

LEGEND: NS= Not Shown

** = Purchase locally

@@ = See local Isuzu Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

E-3A

NIGHT-LITE PRO SERIES

PERKINS 103.10

NIGHT-LITE PRO SERIES

PERKINS 103.10

NO REQ’D PART NO DESCRIPTION

1 2 650284* RADIA TOR SHROUD, PERKINS, SIDE
2 1 @@@@ HIGH TEMPERATURE SWITCH
3 1 @@@@ AIR CLEANER DUST CAP
4 1 @@@@ AIR CLEANER

NS 1 650303 AIR F IL TER ELEMENT

5 1 @@@@ AIR CLEANER, MOUNTING BRACKET
6 2 650281* ENGINE MOUNT BRACKET
7 1 @@@@ AIR INT AKE HOSE
8 1 @@@@ OIL PRESSURE SWITCH

9 1 @@@@ UPPER RADIA TOR HOSE
10 1 @@@@ RADIATOR
11 1 @@@@ OIL DRAIN PLUG
12 1 650304 OIL FILTER
NS 1 650305 FUEL FIL TER
13 1 352160 PERKINS 103.10 ENGINE

NS 1 640146 MARATHON 6KW GENERA TOR
NS 1 640157 MARA THON 8KW GENERA TOR

NS 1 650592 POWRGARD 6KW GENERATOR

NS 1 640167 LEROY SUMER 50HZ 6KW GENERATOR

NS 1 650762 LOMBARDINI LDW 903 ENGINE

NS 1 650279* RADIA TOR SHROUD, PERKINS, UPPER

NS 1 650280* RADIA TOR SHROUD, PERKINS, LOWER

NS 1 030052 TRIM LOCK WITH RUBBER SEAL

NS 8 ** M 12-1.25 X 20 GRADE 10.9 BOL T

NS 8 ** 1/4-20 X.75 STAINLESS STEEL PAN SCREWS

NS 8 ** 1/4 SPLIT LOCK W ASHER

NS 8 ** 1/4-20 NYLON INSERT NUT

NS 1 650285 PERKINS ENGINE WIRING HARNESS

(SEE WIRING SCHEMA TIC F-3A)

NS 46" 081005 NYLON RETURN LINE

NS 26" 081016 1/4 FUEL LINE
NS 1 650278 GT MUFFLER
NS 1 @@@@ MUFFLER GASKET
NS 4 ** M8-1.25 X 20 GRADE 8.8 BOL T
NS 4 ** 3/8 SPLIT LOCK WASHER
NS 1 650265* MARA THON GENERAT OR MOUNT PLA TE

E-3B

LEGEND: NS= Not Shown
** = Purchase locally

@@@@ = See local Perkins Dealer

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

E-3C

NIGHT-LITE PRO SERIES

LOMBARDINI LDW 1003

NIGHT-LITE PRO SERIES

LOMBARDINI LDW 1003

E-3D

NO REQ’D PART NO DESCRIPTION

1 1 650830 LOMBARDINI LDW 1003 ENGINE
2 2 100350 MECC AL TE LT3-100 GENERA T OR
3 1 650562 NLPRO DEUTZ ENGINE MOUNT
4 1 100353 COMBO MOUNT BACK PIECE
5 1 100352 COMBO MOUNT BOTTOM PIECE
6 1 100354 MECC A L TE GENERATOR MOUNT BACK PLA TE
7 1 100614 5/16 -18 T SLOT NUT
8 8 046120 3/8-16 X 1 1/2 HEX HEAD BOL T
9 8 043065 3/8" SPLIT LOCK WASHER
10 6 046041 5/16-18x1/2" 12 PT FLANGE HEAD BOL T
11 4 046115 3/8-16 x 1 1/4 GR 5 HEX BOL T
12 4 044038 3/8 - 16 NYLON INSERT NUT
13 2 047015 3/8" FLA T WASHER
14 2 046055 5/16-18 x 1 1/4" GR 5 HEX BOL T
15 5 047010 5/16" PLATED FLAT WASHER
16 2 044033 5/16 - 18 NYLON INSERT NUT
17 1 651236 LOMB MUFFLER
18 1 046045 5/16 - 18 x 3/4" GR 5 HEX BOLT
19 1 043055 5/16" PLA TED SPLIT LOCK WASHER
20 2 ** M8 x 1.25mm FLANGE NUT
21 2 ** M12 - 1.75 X 25MM HEX BOLT
22 2 ** 12MM WASHER

LEGEND: NS= Not Shown
** = Purchase locally

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

F-1A

NIGHT-LITE PRO SERIES

ELECTRICAL DIAGRAMS

KUBOT A SCHEMATIC (After Sept 1, 2004)

KUBOTA SCHEMATIC (Before Sept 1, 2004)

NIGHT-LITE PRO SERIES

ELECTRICAL DIAGRAMS

F-1B

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

F-2A

NIGHT-LITE PRO SERIES

ELECTRICAL DIAGRAMS

ISUZU 3LB, 3LD ENGINE/GENERATOR WIRING HARNESS

PART# DESCRIPTION

650240 ISUZU ENGINE WIRING HARNESS

NOTE: ALL CONNECTORS VIEWED FROM THE REAR

NIGHT-LITE PRO SERIES

ELECTRICAL DIAGRAMS

F-2B

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

F-3A

NIGHT-LITE PRO SERIES

ELECTRICAL DIAGRAMS

CAT/PERKINS 103.10 ENGINE

PART# DESCRIPTION

650285 CAT/PERKINS ENGINE WIRING HARNESS

CAT/PERKINS ENGINE WIRING HARNESS, KEYLESS OPTION

NIGHT-LITE PRO SERIES

ELECTRICAL DIAGRAMS

MARATHON GENERATOR SCHEMATIC

F-3B

POW’R GARD GENERATOR SCHEMATIC

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

F-4A

NIGHT-LITE PRO SERIES

ELECTRICAL DIAGRAMS

NIGHT-LITE PRO SERIES

ELECTRICAL DIAGRAMS

120V GFCI AND 240V RECEPTACLE WIRING

F-4B

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

F-5A

NIGHT-LITE PRO SERIES

ELECTRICAL DIAGRAMS

MUL TI-TAP 50 HZ TRANSFORMER WIRING DIAGRAM

NIGHT-LITE PRO SERIES
ELECTRICAL DIAGRAMS

DUTTON-LAINSON STRONG ARM WINCH SCHEMATIC

F-5B

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

F-6A

NIGHT-LITE PRO SERIES

ELECTRICAL DIAGRAMS

LOMBARDINI LDW 903 WIRING DIAGRAM

NIGHT-LITE PRO SERIES

ELECTRICAL DIAGRAMS

LOMBARDINI LDW 903 WIRING DIAGRAM

F-6B

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

NIGHT-LITE PRO SERIES

ALLMAND LIGHTING SYSTEMS

LIMITED W ARRANTY

UNITED ST A TES and U.S. TERRITORIES

THIS W ARRANTY IS IN LIEU OF ALL OTHER W ARRANTIES, EXPRESSED OR IMPLIED INCLUDING W ARRAN­TIES OF MERCHANT ABILITY OR OF FITNESS FOR PURPOSE, AND ANY EXCEPTIONS ARE DESCRIBED IN THE
PUBLISHED LIMITED W ARRANTY ADDENDUM, A V AILABLE UPON REQUEST .

COMPONENTS, SUB-ASSEMBLIES, AND DEVICES MANUF ACTURED BY OTHER MANUF ACTURERS ARE NOT
COVERED BY THIS W ARRANTY. ALL W ARRANTY INFORMA TION FROM SUCH OTHER MANUFACTURERS IS
PROVIDED WITHIN OR ACCOMP ANY THESE GOODS.

Subject to the foregoing, the manufacturer, Allmand Bros. Inc., hereby warrants all equipment manu­factured by Allmand Bros. Inc. to be free from defects in material and workmanship for a period of (1) year
after delivery to the original purchaser. Additionally, Allmand Bros. Inc. hereby warrants all replacement parts
supplied by Allmand Bros. Inc. to be free from defects in material and workmanship for a period of 90 days
after date of invoice. Delivery shall be deemed for the purposes of this warranty to have occurred no later
than five days following the date of sale agreement or invoice unless the purchase agreement or invoice
specifically states a later delivery date in which case such delivery date shall control. The original purchaser
shall be deemed to be a person who places the goods or products in actual use, and any person holding such
goods solely for wholesale or retail sale purposes shall not constitute an original purchaser. PROVIDED, any
leasing of these goods or other use beyond normal demonstration of same shall be deemed to be in use by an
original purchaser and all warranty periods shall commence at the time of such use. During the warranty
period any defective goods or parts hereof shall be repaired or replaced at manufacturer’s discretion. In the
event it is necessary to return such goods or parts to the factory, all transportation charges shall be prepaid.
The manufacturer shall in no event pay mileage expenses, but will warrant outbound ground freight.

The obligations of the manufacturer is solely to repair or replace defective goods or parts or to refund
the cost of the same if it is determined by the manufacturer that repair or replacement will not return the goods
to proper working order or utility. THE REMEDIES SET FORTH HEREIN ARE EXCLUSIVE AND

MANUFACTURER SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, OR CONSEQUEN­TIAL DAMAGES. THE OBLIGATIONS OF THE MANUFACTURER HEREUNDER SHALL IN
NO WAY EXCEED THE PRICE OF THE EQUIPMENT OR PART UPON WHICH SUCH LI­ABILITY IS BASED.

The warranty shall not extend to tires, lamps, batteries, or parts that have been altered, changed,
damaged, or improperly installed, repaired, operated or maintained. Provided, this exclusion shall not apply to
installations, repairs or other work done at the manufacturer’s plant or under direct manufacturer’s supervi­sion. The Operator’s Manual, to the extent covered therein, is deemed to set forth the proper procedures for
operation, repair, installation, and maintenance of these goods.

No representative, dealer or distributor of the company is authorized to make any changes or
exceptions to this warranty unless expressly authorized in writing from the manufacturer. All warranty
claims must be filed within forty-five (45) days of the failure.

ALLMAND BROS. INC., 1502 W 4TH AVENUE, P.O.BOX 888, HOLDREGE, NE 68949 [phone]

NIGHT-LITE PRO SERIES

* Use these codes to designate color needed:
01-White 06-Allmand Gold

02-Gloss Black 09-Flat Black
03-Gray 10-High temp Black
04-Allmand Y ellow 11-Red
05-Orange 12-Chrome
15-Plated

NIGHT-LITE PRO SERIES