Description
GigE camera with Sony ICX424 CCD sensor
The Mako G-032B/C is an industrial GigE camera with Sony's ICX424 sensor. Mako cameras
have the same compact form factor and the same mounting positions as many analog
cameras. All models include PoE, three optocoupled outputs, and a 64 MB image buffer. The
image quality profits from the precisely aligned sensors.
●
Sony ICX424 (type 1/3), 0.3 Megapixels
●
Trigger
❍
External trigger event: rising/falling/any edge, level high/low
❍
External trigger delay: 0 to 46 s in 1 µs increments
●
Sync modes
❍
Trigger ready, trigger input, exposing, readout, imaging, strobe, GPO
●
Modular options
❍
Various IR cut/pass filters, protection glass
❍
CS-Mount
❍
Angled head
❍
White medical housing
http://www.alliedvisiontec.com/emea/products/cameras/gigabit-ethernet/mako/g-032bc.html 1
Specifications
Mako G-032
Interface IEEE 802.3 1000baseT
Resolution 658 x 492
Sensor Sony ICX424
Sensor type CCD Progressive
Sensor size Type 1/3
Cell size 7.4 µm
Lens mount C/CS-Mount
Max frame rate at full resolution 102 fps
A/D 14 bit
On-board FIFO 64 MB
Output
Bit depth 8/12 bit
Mono modes Mono8, Mono12, Mono12Packed
Color modes YUV YUV411Packed, YUV422Packed, YUV444Packed
Color modes RGB RGB8Packed, BGR8Packed
Raw modes BayerRG8, BayerRG12, BayerRG12Packed
General purpose inputs/outputs (GPIOs)
Opto-coupled I/Os 1 input, 3 outputs
Operating conditions/Dimensions
Operating temperature +5°C … to +50°C (housing temperature)
Power requirements (DC) PoE /12 V - 24 V
Power consumption (12 V) 2.8 W (PoE) / 2.4 W (non-PoE)
Mass 80 g
Body Dimensions
(L x W x H in mm)
Regulations CE, FCC Class B, RoHS
60.5 x 29 x 29 mm, incl. connectors
Download technical drawing (click here)
http://www.alliedvisiontec.com/emea/products/cameras/gigabit-ethernet/mako/g-032bc.html 2
Smart features
●
ROI (Region of Interest Readout)
●
Camera temperature monitoring
●
Exposure
❍
Auto/one push/programmable
❍
Exposure time 10 µs to 93 s
●
White balance
❍
Auto/one push/programmable
●
On-board debayering
●
Hue, saturation
●
Gain
❍
Auto/one push/programmable
❍
Manual gain control: 0 to 30 dB (1 dB/step)
●
Look-up table (LUT), gamma correction
●
DSP subregion (selectable ROI for auto features)
●
Binning (up to 8 x 14, independent x and y binning)
●
Stream hold
●
StreamBytesPerSecond (easy bandwidth control)
●
Event channel
●
Chunk data
●
3 storable user sets
http://www.alliedvisiontec.com/emea/products/cameras/gigabit-ethernet/mako/g-032bc.html 3
Applications
The Mako is an inexpensive industrial GigE camera with a compact form factor. It is suitable
for all typical machine vision applications:
●
Robotics
●
Quality control
●
Inspection, surveillance
●
Industrial imaging
●
Machine vision
●
Logistics
http://www.alliedvisiontec.com/emea/products/cameras/gigabit-ethernet/mako/g-032bc.html 4
Loading...