24 port stackable 10/100TX Power over
Ethernet switch with 2 active SFP bays
(unpopulated) and 2 standby 10/100/1000T
ports (RJ-45)
Overview
One of a series of stackable switches from
Allied Telesis, the AT-8000S/24POE provides
high performance Layer 2 switching in an
affordable fixed configuration platform
combined with Power over Ethernet to provide
power to edge devices including IP phones and
wireless access points.This switch offers 24
10/100 ports, two fixed SFP Combo slots plus
two integrated stacking connectors that deliver
a total of 4Gbps stacking bandwidth. The
stacking capability integrated into this platform
is configured as a resilient ring topology
designed to provide high reliability and
simplified management for higher port density
applications.
Combined Ethernet and Power for
Branch Office and Wiring Closet
Connectivity
Powerful line rate performance and stackability
make this switch ideal for branch offices or the
wiring closet of larger offices where power is
needed for remote devices. The state-of-the-art
QoS capability of this product ensures reliable
delivery of advanced network services such as
voice while effectively controlling the continually
increasing traffic needs found in today’s networks.
Easy Access Networking
Featuring an industry standard CLI and Allied
Telesis’ intuitive yet fully featured Web interface
the advanced features of the AT-8000S/24POE
are accessible to a wide range of system
administrators. The well known CLI and Web
interfaces significantly reduce learning time and
minimize the cost of deployment.
Allied Telesiswww.alliedtelesis.com
Secure Management
Only authorized administrators can access the
management interface of the 8000S series.
Protocols such as SSL, SSH and SNMPv3
facilitate this protection of your network with
local or remote connections.
Securing the Network Edge
To ensure the protection of your data, it is
important to control access to your network.
Protocols such as IEEE 802.1x port-based
authentication guarantee that only known users
are connected to the network. Unknown users
who physically connect can be isolated to a predetermined part of your network offering guests
such benefits as Internet access while ensuring
the integrity of your private network data.
Gigabit and Fast Ethernet SFP
Support
All switches in the 8000S family suppor t both
Gigabit and Fast Ethernet Small Form-factor
Pluggables (SFPs). This makes the 8000S series
an ideal family for environments where Gigabit
fiber switches will be phased-in over time. The
8000S family allows for connectivity to the
legacy 100FX hardware until it is upgraded to
Gigabit. Suppor t for both speeds of SFPs allows
organizations to stay within budget as they
migrate to faster technologies.
Port speed
10/100TXRJ-45
10/100/1000TRJ-45
100FX, 1000SX, 1000LXSFP slot
RS232DB9 pin, male port
Internal power supply
Power over Ethernet
Total power budget225W
For switch12V/ 45W
PoE budget50V/ 185W
PoE max supported
IEEE 802.3af class 3
devices (15.4W): 12 ports
PoE max supported
IEEE 802.3af class 2
devices (7.3W): 24 ports
IEEE 802.afPower over Ethernet
(mode B)
Interface Standards
IEEE 802.310T
IEEE 802.3u100TX and 100FX
IEEE 802.3z1000SX
IEEE 802.3ab1000T
General Standards
IEEE 802.1DBridging
IEEE 802.3xBackPressure/ flow control
Stacking
Up to six units
Single system appearance
Single IP management
Back-up master
Full-duplex link with 2Gbps performance
Link aggregation/trunking across stack
Port mirroring across stack
VLAN across stack
access control
MAC-based network access control
ACL - Access Control Lists
Fault Protection
Broadcast storm control
Power Characteristics
Voltage input100-240V AC
Voltage output48vDC
Current3.5A
Power consumption236W
2
Power supply efficiency72.67%
Heat dissipation768.3 BTU/hour
Clock frequency166Mhz
Acoustic noise50.8dB
Environmental Specifications
Operating temp0°C to 40°C (32°F to 104°F)
Storage temp-25°C to 70°C (-13°F to 158°F)
Relative humidity 10% to 90% non-condensing
Storage humidity 5% to 95% non-condensing
Operating altitude Maximum 3,000m (9,843ft)
Electrical/ Mechanical Approvals
SafetyUL 1950 (UL/cUL), EN60950 (TUV)
EMIFCC Class A, EN55022 Class A,
One AT-8000S/24POE switch
Power cord AC
Rack-mount kit
Rubber feet for desktop installation
RS232 management cable
Stacking cable
Install guide and user guide in CD and at
www.alliedtelesis.com
Country of Origin
China
Ordering Information
AT-8000S/24POE-xx
24 port stackable 10/100TX PoE Layer 2 switch with
active SFP bays (unpopulated) and 2 standby
2
10/100/1000T ports (RJ-45)
Where xx = 10 for US power cord
20 for no power cord
30 for UK power cord
40 for Australian power cord
50 for European power cord
Accessories
Small Form Pluggables (SFPs)
AT-SPFX/2
Multi-mode Fiber, 2km, 100FX, SFP, 1310nm
AT-SPFX/15
Single-mode Fiber, 15km, 100FX, SFP, 1310nm
AT-SPFX/40
Single-mode Fiber, 40km, 100FX, SFP, 1310nm
AT-SPTX
Copper, GbE Small Form-factor Pluggable (SFP)
AT-SPSX
Multi-mode Fiber, GbE Small Form-factor Pluggable (SFP)
850nm
AT-SPLX10
Single-mode Fiber, 10km, GbE SFP, 1310nm
AT-SPLX40
Single-mode Fiber, 40km, GbE SFP, 1310nm
AT-SPLX40/1550
Single-mode Fiber, 40km, GbE SFP, 1550nm
AT-SPZX80
Single-mode Fiber, 80km, GbE SFP, 1550nm
1
New feature on AT-S94 version 3.0.0.32
2
Worst case load condition for actual measured power on sample unit
USA Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters
Asia-Pacific Headquarters