Datasheet | Network Interface Cards
AT-2750TX
Fast Ethernet Secure Copper Interface Card
T-2750TX
A
100TX 32-bit, PCI 2.2 compliant secure
copper interface card
Secure Copper Network Interface
Card
The AT-2750TX secure interface card hardens
at-risk systems without impacting performance.
It features an embedded security processor to
offload encryption, authentication, and other
cycle-intensive tasks from the host CPU—
resulting in optimal system and application
response.The types of encr
are DES, 3DES, FIPS capable (not certified) and
AES (upon Vista release - pending).
yption supported
yption
Encr
DES: The Data Encr yption Standard (DES) is a
56-bit key method for encrypting information
selected as an official Federal Information
Processing Standard (FIPS) for the United States
in 1976.
3DES: The Triple Data Encryption Standard
(3DES) is the successor of DES, and uses a
168-bit sized key. 3DES is very secure.
AES: Advanced Encryption Standard (AES) is a
block cipher adopted as an encryption standard
by the US government. It has been analyzed
extensively and is now used widely worldwide.
AES was announced by the National Institute of
Standards and Technology (NIST) as US FIPS
PUB 197 (FIPS 197) and became a standard in
May 26, 2002.
FIPS: The Federal Information Processing
Standard 140 (FIPS) are a series of US
vernment computer security standards that
go
specify requirements for cryptography modules.
Key Features
Advance Properties
• Secured transmission
• PCI 2.2 capable
• Low profile and standard height br
included
• RoHS compliant
• 3DES
• AES
• IPv6
• Compliant with Trade Agreement Act
ack
ets
Allied Telesis www.alliedtelesis.com
AT-2750TX | Fast Ethernet Secure Copper Interface Card
Specifications
Bus Type
PCI 2.2
Ethernet Standards
IEEE 802.2 LLC
IEEE 802.3ac MAC
IEEE 802.3 10 Ethernet
IEEE 802.3u Fast Ethernet
Drivers
Supported
Windows XP
Compliance
UL
FCC/EN55022 Class B
TUV
EN55024
CE
Environmental Specifications
Operating temperature 0°C to 50°C
Storage temperature -25°C to 70°C
Relative humidity 5% to 90% non-condensing
Power
Power consumption 4 Watts (max)
Signaling voltage 3.3/5V
Status Indicators
LED 2 ports
Physical Characteristics
Dimensions 16.8cm x 6.9cm
(W x H) (6.7”) x (2.7”)
Weight 0.34lbs (0.15kg)
Ships with standard bracket attached to interface card.
Low-profile bracket is included in packaging.
B
ootROM Socket
3
2-pin PLCC socket (BootROM ordered separately)
Maximum Cabling Distances
10T 100m
100TX 100m
Ethernet Interface
10T (10Mbps)
2 pair EIA/TIA category 3, 4 or 5
100TX (100Mbps) 2 pair EIA/TIA category 5
Reliability
Calculated MTBF > 300,000 hours
Connectors
RJ-45
UTP Interface
Connector shielded RJ-45, MDI
Optical receive sensitivity (max) -31dBm
Transmit optical power (min/max) -19/-14dBm
Ordering Information
AT-2750TX
100TX 32-bit, PCI 2.2 compliant secure copper interface
card
Ships with standard bracket attached to interface card.
Low-profile bracket is included in packaging.
10 ON 10Mbps link up
OFF 10Mbps link down
100 ON 100Mbps link up
OFF 100Mbps link down
USA Headquarters | 19800 North Creek Parkway | Suite 200 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
European Headquarters | Via Motta 24 | 6830 Chiasso | Switzerland | T: +41 91 69769.00 | F: +41 91 69769.11
Asia-Pacific Headquar
ters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
www.alliedtelesis.com
© 2007 Allied Telesis Inc.All r ights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the proper ty of their respective owners. 617-000237 Rev. C