Allied Telesis AT-2750FX User Manual

Datasheet | Network Interface Cards

AT-2750FX

Fast Ethernet Secure Fiber Interface Card

T-2750FX/xx

100FX 32-bit, PCI 2.2 compliant secure fiber interface card

Secure Fiber Network Interface Card

The AT-2750FX secure interface card hardens at-risk systems without impacting performance. It features an embedded security processor to offload encryption, authentication, and other cycle-intensive tasks from the host CPU— resulting in optimal system and application response.The types of encryption suppor ted are DES, 3DES, FIPS capable (not certified) and AES (upon Vista release - pending).

yption

Encr

DES: The Data Encryption Standard (DES) is a

56-bit key method for encrypting information selected as an official Federal Information Processing Standard (FIPS) f in 1976.

3DES: The Triple Data Encryption Standard

(3DES) is the successor of DES, and uses a 168-bit sized key. 3DES is very secure.

AES: Advanced Encryption Standard (AES) is a

block cipher adopted as an encryption standard by the US go extensively and is now used widely worldwide. AES was announced by the National Institute of Standards and Technology (NIST) as US FIPS PUB 197 (FIPS 197) and became a standard in May 26, 2002.

FIPS: The Federal Information Processing

Standard 140 (FIPS) are a series of US government computer security standards that specify requirements f

vernment. It has been analyzed

or the United States

aph

yptogr

or cr

y modules.

Key Features

Advance Properties

• Secured transmission

• PCI 2.2 capable

• Low profile and standard height br

included

• RoHS compliant

• 3DES

• AES

• IPv6

• Compliant with Trade Agreement Act

ack

ets

Allied Telesis www.alliedtelesis.com

AT-2750FX |

Fast Ethernet Secure Fiber Interface Card

Specifications

Bus Type

PCI 2.2

Ethernet Standards

IEEE 802.2 LLC IEEE 802.3ac MAC IEEE 802.3u Fast Ethernet

Drivers

Supported

Windows XP

Compliance

UL FCC/EN55022 Class B TUV EN55024 CE

Environmental Specifications

Operating temperature 0°C to 50°C Storage temperature -25°C to 70°C Relative humidity 5% to 90% non-condensing

Power

Power consumption 4.8 Watts (max) Signaling voltage 3.3/5V

Status Indicators

LED 1 port

Link/ACT On Link activity

Blink Activity

FDX On Full-duplex mode

Off Half-duplex mode

Physical Characteristics

Dimensions 16.8cm x 6.9cm (W x H) (6.7”) x (2.7”)

Weight 0.34lb (0.15kg)

Ships with standard bracket attached to interface card. Low-profile bracket is included in packaging.

Connectors/Interface

SC ST Optical receive sensitivity (max) -31dBm Transmit optical power (min/max) -19/-14dBm

Ordering Information

AT-2750FX/xx

100FX 32-bit, PCI 2.2 compliant secure fiber interface card

Where xx = ST, SC

Ships with standard bracket attached to interface card. Low-profile bracket is included in packaging.

ters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830

www.alliedtelesis.com

© 2007 Allied Telesis Inc.All r ights reserved. Information in this document is subject to change without notice. All company names, logos, and product designs that are trademarks or registered trademarks are the proper ty of their respective owners. 617-000236 Rev. C