Allied Telesis AT-2716POE-FXSC data sheet

Network Adapters | Product Information

2716PoE/FX Series

PCI Express x 1 Dual Port PoE Network Adapters

The Allied Telesis 2716POE/FX Series PoE Network Adapters enable a PC to

power a VoIP phone or other traditional copper Powered Device (PD) over a secure fiber network.

VoIP/PoE Flexibility

The 2716POE/FX Series are two-port

adapters with a 100FX multi-mode fiber port and a 10/100/1000T copper port capable of supporting Class 3 PoE devices.

These unique products allow PoE

devices, such as a VoIP phone, to be attached to a standard desktop and communicate downstream through a secured 100FX fiber link.

The 2716POE/FX Series is unique in

that it allows copper devices such as VoIP phones, Wi-Fi access points, and cameras to communicate through a secured fiber network—without the additional expense of media converters or a separate network to segment the traffic, thus saving installation and maintenance costs.

AT-MUX

Bridging of the fiber and copper interface is accomplished with installation of the Allied Telesis

Example 1

IP phone Untagged

Copper port Untagged

Fiber port VLAN tagge d

VLAN 2

VLAN 2 VLAN 1

AT-MUX application. With AT-MUX, each interface can be prioritized and separated into VLANs, allowing segmentation of data and voice traffic onto a single fiber link.

Advanced Manageability

The priority queuing offered by the 2716POE/FX Series can help users set up the network, based on their own needs, providing easy prioritization of VOIP traffic. The comprehensive diagnostics and configuration software suite provides system administrators and engineers with a profound tool to analyze the interface card and check specific data.

More Bandwidth with PCI-Express Interface

The 2716POE/FX Series PCI-Express (PCIe x1) design offers the maximum possible bandwidth and bus efficiency while providing the benefits of low power consumption.

VoIP Server

File Server

VLAN 2

VLAN 1

VLAN 2 VLAN 1

Key Features

Management software

ۼ VLAN support

ۼ Link aggregation

ۼ Failover

Advanced properties

ۼ Dual port (multi-mode fiber and

copper) adapter with PoE

ۼ PCIe x1 2.0

ۼ Wake-on-LAN (WoL) supported

(enabled by default, utility to disable available in firmware)

ۼ Secured transmissions

ۼ Advanced installation utility

ۼ Advanced diagnostics

ۼ Remote boot (PXE 2.1)

ۼ TCP/IP checksum off-loading

ۼ Priority queueing

ۼ Driver support for popular operating

systems

ۼ Available with SC or ST connectors

ۼ Compliant with the Trade Agreement

Act

ۼ Microsoft-certified drivers

ۼ RoHS compliant

ۼ Low-profile and standard height

brackets included (low-profile attached)

ۼ IPv6

VLAN 2

Example 2

IP phone Untagged

Copper port VLAN tagged

Fiber port VLAN tagge d

alliedtelesis.com

VLAN 2

Example 3

IP phone VLAN tagge d

Copper port Untagged

Fiber port VLAN tagge d

NETWORK SMARTER

2716PoE/FX Series | PCI Express x 1 Dual Port PoE Network Adapters

Specifications

Management Features

WMI AC PI 1.1 PXE 2.1 boot RO M SNMP

Bus Type

PCIe x 1 v 2.0

Ethernet

IEEE 802.1p Quality of Service IEEE 802.1Q VLANs IEEE 802.2 LLC IEEE 802.3ac MAC IEEE 802.3i 10T over twisted pair IEEE 802.3u 100T IEEE 802.3ab 1000T over twisted pair IEEE 802.3x Flow control auto-negotiation IEEE 802.3af Class 3 PoE

Power over Ethernet

Mode A power Power budget 15.4W

Drivers

Windows 10, 64- or 32-bit Windows 8, 64- or 32-bit Windows 7, 64- or 32-bit* Windows V ista, 64- or 32-bit Windows X P, 64- or 32*-bit Windows S erver 2012 R2, 64-bit Windows S erver 2012, 64-bit Windows S erver 20 08 R2, 64- or 32-bit Windows S erver 20 08, 64- or 32-bit Windows S erver 20 03, 64- or 32-bit Linux 2.6

* Suppor ted by AT-Mux bridging s oftware

Network Type

10/100/ 100 0T with P oE 100FX

Network Speed

Copper Auto-negotiation 1000 full-duplex 1000 half-duplex 100 full-duplex 100 half-duplex 10 full-duplex 10 half-duplex Fiber 100 full-duplex 100 half-duplex

Network Controller

Broadcom BCM5718

Optical Specifications

Output Optical Power -20(Min) -14(Max) dBM Optical S ensitivity -34 ( Typ) -32(Max) dBM Center Wavelength 1310 nm

Connectors

RJ-45 Duplex SC or ST SATA – Serial ATA used to draw power for Po E

Status Indicators

LED (per port) On: link up Off: link down Blink: activity

Power

Power consumption 2.5 Watts (avg) without PoE Signaling voltage 3.3V

Environmental Specifications

Operating temperature 0 ºC to 40 ºC (32°F to 104°F) Relative humidity 5% to 90% (non-condensing) Storage temperature -25ºC to 70 ºC (-13°F to 158°F )

Physical Characteristics

Dimensions (W x H) 14.09 cm x 5.6 cm (5.5 in x 2.2 in) Weight 68 g (2.4 oz) Ships with low-profile bracket attached to network adapter. Standard bracket included in packaging.

Compliance

RoHS China RoH S UL FCC/EN55022 Class A TUV EN55024 CE C-T IC K VCCI

Ordering Information

AT-2716POE/FXAA-xxx

100FX + 10/100/1000T PoE PCIe x1 network adapter

Where A A = SC connector type ST connector type

Where xxx = 001 for single pack 901 for single pack, Federal and Government

Ships with low-profile bracket attached to network adapter. Standard bracket is included in packaging.

NETWORK SMARTER

alliedtelesis.com

© 2016 Allied Tele sis, Inc. All right s reserved. Info rmation in this docum ent is subject to chan ge without notice. A ll company names, l ogos, and product d esigns that are trad emarks or registe red trademarks ar e the property of t heir respective o wners.

617-000426 RevE