Allied Telesis AT-2711FX-ST Data sheet

Network Adapters | Product Information

2711 Series

Fast Ethernet Fiber PCI-Express Network Adapters

Allied Telesis 2711 Series Network Adapters are designed for fiber-to-the-

desktop networks that depend on secure and reliable systems. With a small form factor PCIe x1 bus, the 2711 Series is an ideal fit for government, education or other networks with high security requirements.

High Reliability

The 2711 Series Fast Ethernet

fiber network adapters feature a comprehesive Windows utility that performs detailed tests, diagnostics and analysis.

Advanced Manageability

The priority queuing offered by the

2711 Series can help users set up their networks based on their own needs.

The comprehensive diagnostics and

configuration software suite provides system administrators and engineers with a robust tool to analyze the network adapter and check specific data.

More Bandwidth with PCIExpress Interface

The 2711 Series x1 PCI-Express (PCIe)

design provides the maximum possible bandwidth and bus efficiency, while delivering additional benefits such as low power consumption.

Easy Migration Path for AT-2701FXa Users

For customers using Allied Telesis

100Mbps fiber adapter (AT-2701FXa),

the 2711 Series is the ultimate solution for upgrading to PCI-Express. These customers can continue using their existing 100Mbps fiber network without adding any new equipment.

For customers equipped with PCIExpress systems, the 2711 Series adapters provide the ability to easily build or connect to Fast Ethernet fiber networks.

Hassle-Free Support

All Allied Telesis Network Adapters include technical support, ensuring trouble-free installation.

Key Features

ۼۼ PCIe (PCI-Express) x1 interface

ۼۼ IEEE 802.1x flow control

ۼۼ IEEE 802.1p-based traffic

prioritization

ۼۼ TCP checksum RX/TX supported

ۼۼ PXE (2.1) remote boot support

ۼۼ Wake-on-LAN (WoL) supported

(enabled by default, utility to disable available in firmware)

ۼۼ Audio/Video Bridging (AVB)

ۼۼ Jumbo frame up to 9.6KB

ۼۼ Receive-Side Scaling (RSS)

ۼۼ MSI and MSI-x

ۼۼ Available with LC, SC, ST or MT-RJ

multi-mode fiber connections

alliedtelesis.com

ۼۼ Available with SC and LC single-mode

fiber connections

ۼۼ Low-profile and standard height

brackets included

ۼۼ RoHS compliant

ۼۼ IPv6

ۼۼ Compliant with Trade Agreement Act

ۼۼ SNMP

ۼۼ Microsoft-certified drivers:

Windows Vista, Windows 2010

NETWORK SMARTER

2711 Series | Fast Ethernet Fiber PCI-Express Network Adapters

Specifications

Bus Type

PCIe x 1 v1.1

Interface Standards

IEEE 802.1p Quality of Service IEEE 802.1Q VLAN tag IEEE 802.1as 1588 Precision Time Protocol (PTP) IEEE 802.2 LLC IEEE 802.3ac MAC IEEE 802.3u Fast Ethernet IEEE 802.3x Flow control auto-negotiation

Drivers

Windows 10, 64- or 32-bit Windows 8, 64- or 32-bit Windows 7, 64- or 32-bit Windows V ista, 64- or 32-bit Windows X P, 64- or 32-bit Windows S erver 2012 R2, 64-bit Windows S erver 2012, 64-bit Windows S erver 20 08 R2, 6 4- or 32-bit Windows S erver 20 08, 64- or 32-bit Windows S erver 20 03, 64- or 32-bit NDIS2 Linux 2.6

Management Features

WMI ACPI 2.0/wOI PXE 2.1 Boot ROM SNMP

Connectors

LC, SC, ST, MT-RJ

Optical Specifications

Output receive sensitivity -31 dBM

Transmit optical power -19/-14 dBM

Status Indicators

LED On: link up Off: link down Blink: activity

Power

Power consumption 2.0 Watts max

Signaling voltage 3.3V

Environmental Specifications

Operating temperature 0ºC to 5 0ºC (32°F to 122°F)

Relative humidity 5% to 90% (non-condensing)

Storage temperature -25ºC to 70 ºC (-13°F to 158°F )

Physical Characteristics

Dimensions (W x H) 7.7 cm x 6.9 cm (3.0 in x 2.7 in)

Weight 50 g (1.76 oz)

Ships with low-profile bracket attached to interface card.

Standard bracket included in packaging.

Maximum Cabling Distances

Up to 2000 m (6,560 ft) in full-duplex

Up to 412 m (1,351 ft) in half-duplex

Compliance

RoHS

FCC/EN55022 Class B TUV

EN55024

C-T IC K

VCCI

Ordering Information

AT-2711FX/SC-xxx

100FX SC PCIe x1 network adapter

AT-2711FX/ST-x xx

100FX ST PCIe x1 network adapter

AT-2711FX/M T-x x x

100FX MT PCIe x1 network adapter

AT-2711FX/LC-xxx

100FX LC PCIe x1 network adapter

AT-2711LX/SC-xxx

100LX SC PCIe x1 network adapter

AT-2711LX/LC-xxx

100LX LC PCIe x1 network adapter

Where xxx = 001 for single pack 901 for single pack, Federal and Government

NETWORK SMARTER

alliedtelesis.com

© 2016 Allied Tele sis, Inc. All right s reserved. Info rmation in this docum ent is subject to chan ge without notice. A ll company names, l ogos, and product d esigns that are trad emarks or registe red trademarks ar e the property of t heir respective o wners.

617-00057 5 Rev B