Network Interface Cards
PRODUCT INFORMATION
AT-2701FTXa
PCI 32-BIT FAST ETHERNET FIBER AND COPPER
NETWORK INTERFACE CARD
The Allied Telesis AT-2701FTXa 100Mbps Fast Ethernet dual-port ber and
copper network interface card features a small footprint and a low-prole
option, making it a perfect choice for PCs equipped with small desktop
solutions.
Manageability and Flexibility
The AT-2701FTXa features a full line of
card assistant software. With a choice
of connectors — ST or SC — the AT2701FTXa meets the requirements of
most installations.
Key Features
Management Software
» VLAN support
Advanced Properties
» PCI 2.2 compliant
» Wake-on-LAN (WoL)
supported (enabled by default,
utility to disable available in
firmware)
» Secured transmissions
» Diagnostics
» Remote boot (PXE 2.1)
» Driver support for popular
operating systems
» RJ-45 connector
» Available with SC or ST
connections
» Compliant with the Trade
Agreement Act
» Microsoft-certified drivers
» RoHS compliant
» Low-profile and standard
height brackets included
» IPv6
» Can also be used in PCI-x bus
Specifications
Management Features
Windows Management Instrumentation (WMI)
ACPI 2.0/w01
PXE 2.1 Boot ROM
Bus Type
PCI 2.2
Network Type
100FX
10/100TX
Network Controller
Realtek 8139
Ethernet
IEEE 802.1Q VLA Ns
IEEE 802.2 LLC
IEEE 802.3ac MAC
IEEE 802.3u Fast Ethernet
Drivers
Windows 7, 64-bit
Windows 7, 32-bit
Windows XP, 32-bit
Linux 2.6
Interface Type and Connectors
SC connector
ST connector
RJ-45 connector
Optical receive sensitivity (typ) -34 dBm
Transmit optical power (min/max) -19 / -14 dBm
Status Indicators
LNK On Active Port (Fiber or Copper) link up
O ff Active Port (Fiber or Copper) link down
ACT Blink Activity
Power
Typical power consumption 2.5 Watts at 3.3V
Signaling voltage 3.3 / 5V
Environmental Specifications
Operating temperature 0 ºC to 40ºC (32°F to 104°F)
Relative humidity 5% to 90% (non-condensing)
Storage temperature -25ºC to 70ºC (-13°F to 158°F)
Physical Characteristics
Dimensions (W x H) 12.5 cm x 6.4 cm (4.9 in x 2.5 in)
Ships with low-profile bracket attached to interface card.
Standard bracket included in packaging.
Compliance
RoHS
UL
FCC/EN55022 Class A
TUV
EN55024
CE
C-TICK
VCCI
Ordering Information
AT-2701FTXa/aa-xxx
100Mbps Fast Ethernet dual-port fiber and copper
network interface card
Where aa = SC or ST
Where xxx = 001 for single pack
901 for single pack, Federal and Government
Ships with low-profile bracket attached to interface card.
Standard bracket is included in packaging.
North America Headquarters | 19800 North Creek Parkway | Suite 100 | Bothell | WA 98011 | USA | T: +1 800 424 4284 | F: +1 425 481 3895
Asia-Pacic Headquarters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830
EMEA & CSA Operations | Antareslaan 18 | 2132 JE Hoofddorp | Netherlands | T: +31 23 5656800 | F: +31 23 5575466
alliedtelesis.com
© 2012 Allied Telesis, Inc. All rights res erved. Informa tion in this document is subject to change withou t notice. All company names, logos , and product designs that are tra demarks or regis tered trademar ks are the property of their respe ctive owners.
617-00 0456 Rev. A