Allied Telesis AT-2701FTX User Manual

Datasheet | Network Interface Cards

AT-2701FTX

PCI 32-bit Fast Ethernet Fiber Network Interface Card

T-2701FTX

100Mbps Fast Ethernet dual fiber and copper 100TX interface card

Choice and Flexibility

Allied Telesis’ AT-2701FTX is the answer for

s.The small

t Wake-

iber interface cards that suppor

those f on-LAN (WoL) for either PCI 2.1 or PCI 2.2 systems but not both. Allied Telesis’ NICs support WoL through the PCI 2.2 bus and support PCI 2.1 WoL via external cables. Resistant to signal degradation, snooping, and interference, the AT-2701FTX is the ideal solution for networks requiring protection from electrical interference and hack

int—together with the low-profile option

footpr of the AT-2701FTX—make these products a perfect choice for PCs equipped with small desktop solutions.

Advanced Mana

Allied Telesis’ AT-2701FTX features a full-line of card assistant software:

T-Setup reduces Window Driver installation to

• A

a mouse click.This Windows program guides users through driver installation, updates, and problem corrections.

• AT-Stat is an advanced Windows application

that reports network conditions and

ormance such as hardware resources,

perf network statistics, and configuration.

• The VLAN protocol dr

administrators to configure their VLAN network

ic at the PC instead of the switch, enabling

fabr transparent movement of systems between switches.

• TCP/IP checksum off-loading improves CPU

use by verifying TCP/IP traffic checksums at the interface card rather than at the host processor, improving overall system performance for slower PCs.

• Packet prioritization enables Windows

applications with Class of Service capabilities to

e out-bound pack

itiz

ior

pr NICs, a useful feature for video streaming and VoIP where interruptions are unacceptable.

• The AT-2701FTX’s onboard Managed Boot

Agent (MB standard boot protocols, NetWare NCP/IPX, IBM’s RPL, traditional DHCP, and BOOTP, supporting both BBS (BIOS Boot Specification) and non-BBS compliant PCs. It also includes an extensive set of utilities for

OM conf

boot R pre-OS and network boot image files.

• Offering a wide range of connector choices—

or MT-RJ—these cards meet the

ST requirements of most fiber installations.

geability

iver allows network

et streams to these

A) pro

vides a wide set of industry-

including PXE,

as w

ation,

igur

ell as access to

Key Features

Management Software

• VLAN support

• Link aggregation

• Failover

Advance Properties

• PCI 2.2 compliant

• Wake-on-LAN (WoL)

• Secured transmissions

• Advanced installation utility

• Advanced diagnostics

• Remote boot (PXE 2.1)

• TCP/IP checksum off-loading

• Priority queuing

• Dr

iver support for popular operating systems

including Sun Solaris

• A

vailable with SC, ST, or MT-RJ connections

ade Agreement Act

tif

ied dr

• Compliant with the

• Microsoft cer

• RoHS compliant

ile and standard height brackets

w-prof

• Lo

included

• IPv6

• Also can be used in PCI-x b

Allied Telesis www.alliedtelesis.com

AT-2701FTX | 32-bit PCI

Fast Ethernet Fiber Network Interface Card

Specifications

Management Features

WMI ACPI 2.0/wOI PXE 2.1 Boot ROM

Bus Type

PCI 2.2

Ethernet Standards

IEEE 802.1p Quality of Service IEEE 802.1Q VLANs IEEE 802.2 LLC IEEE 802.3ac MAC IEEE 802.3 10 Ethernet IEEE 802.3u Fast Ethernet

Drivers

Supported

Vista Vista 64-bit Windows XP Windows XP 64-bit Windows 2003 Windows 2003 64-bit Windows 2000 NDIS2 NetWare 6.x Linux 2.4 Linux 2.6

Available

Windows NT 4 Solaris x86 Solaris Sparc 32-bit Solaris Sparc 64-bit NetWare 5.x

Compliance

RoHS UL FCC/EN55022 Class B TUV EN55024 CE C-TICK VCCI

Connectors

SC ST MT-RJ RJ-45 Optical receive sensitivity (max) -31dBm Transmit optical power (min/max) -19/-14dBm

Environmental Specifications

Operating temperature 0°C to 50°C Storage temperature -25°C to 70°C Relative humidity 5% to 90% non-condensing

Power

Power consumption 4.79 Watts (max) Signaling voltage 3.3/5V

Status Indicators

10 ON 10Mbps link up

Green Full-duplex mode Yellow Half-duplex mode Blink Activity OFF 10Mbps link down

100 ON 100Mbps link up

Green Full-duplex mode Yellow Half-duplex mode Blink Activity OFF 100Mbps link down

Physical Characteristics

Dimensions 16.8cm x 6.5cm (W x H) (6.7”) x (2.6”)

Ships with standard bracket attached to interface card. Low-profile bracket is included in packaging.

Network Type

10/100TX, 100FX

Network Controller

AMD AM79C976

Ordering Information

AT-2701FTX/AA-xxx

100Mbps Fast Ethernet dual fiber and copper interface card

Where AA = ST, SC, or MT-RJ

Where xxx = 001 for single pack

020 for 20-pack 901 for single pack,

compliant with Trade Agreements Act

920 for 20-pack,

compliant with Trade Agreements Act

Ships with standard bracket attached to interface card. Low-profile bracket is included in packaging.

ters | 11 Tai Seng Link | Singapore | 534182 | T: +65 6383 3832 | F: +65 6383 3830

www.alliedtelesis.com

© 2007 Allied Telesis Inc.All r ights reserved. Information in this document is subject to change without notice. All company names, logos,and product designs that are tr ademarks or registered trademarks are the proper ty of their respective owners. 617-000249 Rev. B