Allied Telesis AT-2701FTX User Manual

AT-2701FX/FTX & AT-2746FX
Fast Ethernet Fiber Network Interface Cards (NIC)
FAST ETHERNET FIBER NETWORK INTERFACE CARDS (NIC)
AT-2701FX/AA-xxx
100Mpbs Fast Ether Network Interface Card (NIC)
A
100Mpbs Fast Ethernet dual fiber and copper NIC
AT-2746FX/AA-xxx
100Mpbs Fast Ethernet 10Mbps dual port fiber NIC
CHOICE & FLEXIBILITY
Allied Telesyn’s AT-2701FX/FTX and AT-2746FX are the answers for those fiber adapters that sup­port Wake on LAN (WOL) for either PCI 2.1 or PCI 2.2 systems but not both. Allied Telesyn’s NICs support WOL through the PCI 2.2 bus and sup­port PCI 2.1 WOL via external cables. Resistant to signal degradation, snooping, and interference, the AT-2701FX/FTX and AT-2746FX are ideal solutions for networks requiring protection from electrical interference and hackers.The small footprint— together with the low-profile option of the AT­2701FX/FTX—make these products a perfect choice for PCs equipped with small desktop solutions.
ALLIED ASSISTANT SOFTWARE
Allied Telesyn’s AT-2701FX/FTX and AT-2746FX feature a full-line of card assistant software:
TELESYN’S CARD
AT-Setup reduces Window Driver installation to a mouse click.This Windows program guides
s through dr
user problem corrections.
-Stat is an advanced Windows application that
T
A reports network conditions and performance such as hardware resources, network statistics, and configuration.
net fiber
iver installation, updates, and
• The VLAN protocol driver allows network ators to configure their VLAN network
administr fabric at the PC instead of the switch, enabling transparent movement of systems between switches.
• TCP/IP Checksum off-loading improves CPU use
by verifying TCP/IP traffic checksums at the adapter rather than at the host processor, improving overall system performance for slower PCs.
• Packet prioritization enables Windows applica-
tions with Class of Service capabilities to priori­tize out-bound packet streams to these NICs, a useful feature for video streaming and VoIP where interruptions are unacceptable. The AT­2701FX/FTX’s and AT-2746FX’s onboard Managed Boot Agent (MBA) provides a wide set of industry-standard boot protocols, including PXE, NetWare NCP/IPX, IBM’s RPL, traditional DHCP, and BOOTP, supporting both BBS (BIOS Boot Specification) and non-BBS compliant PCs. It also includes an extensive set of utilities for boot ROM configuration, as well as access to Pre-OS and network boot image files. Offering a wide range of connector choices—ST, SC, MT-RJ, or VF-45—these cards meet the requirements of most fiber installations.
KEY FEATURES
PCI 2.2 compliant
Wake on LAN (WoL)
Secured transmissions
Advanced installation utility
Advanced diagnostics
Managed Boot Agent architecture (MBA)
TCP/IP checksum off-loading
VLAN support
Traffic prioritization
Low-profile option
1MB FIFO
Driver support for popular operating systems
Available with SC, ST, MT-RJ, or VF-45
connections
User guide
Lifetime warranty
AT-2701FX/FTX & AT-2746FX
Fast Ethernet Fiber Network Interface Cards (NIC)
FAST ETHERNET FIBER NETWORK INTERFACE CARDS (NIC)
STATUS INDICATORS
AT-2701FX 2 LEDs to indicate: Link/ACT
On for Link Blink for Activity
FDX On for Full-Duplex
Off for Half-Duplex
AT-2701FTX/2746FX 2 LEDs to indicate: 10Mbps On for Link
Blink for Activity Green for Full-Duplex Yellow for Half-Duplex
100Mbps On for Link
Blink for Activity Green for Full-Duplex Yellow for Half-Duplex
PC BUS INTERFACE
Bus Interface PCI 2.2 Compliant Bus Width 32-bit Data Transfer Mode PCI 2.2 Bus Mastering Power Management Interface
ACPI
DRIVER SUPPORT
Netware 4.2, 5, and 6 Windows 95, 98, ME, XP, NT4, 2000, and 2003 Linux 2.2, 2.4
100MBPS FIBER INTERFACE
Connectors ST, SC, MT-RJ, or VF-45 Fiber type Multi-mode fiber Output Power Minimum: -19dB
ypical: -16.8dBm
T Maximum: -14dB
Receive Sens
Maximum:
.
-31dB
SELECTION GUIDE
100FX 10/100TX 10FL AT-2701FX X - ­A
T-2701FTX X X -
AT-2746FX X - X
POWER CHARACTERISTICS
1A at 5v
ENVIRONMENTAL SPECIFICATION
Operating Temp. 0°C to 50°C Operating Humidity: 5% to 80% non-condensing Storage Humidity: 5% to 95% non-condensing
PHYSICAL CHARACTERISTICS
AT-2701FX/FTX Depth 17.5cm (6.9") Height 6.5cm (2.6")
AT-2746FX Depth 17.7cm (7") Height 8.3cm (3.3")
STANDARDS COMPLIANCE
IEEE 802.3u 100FX IEEE 802.3u 100TX IEEE 802.3j 10FL
802.1Q/P
ELECTRICAL/MECHANICAL APPROVALS
FCC/EN55022 class B UL TUV EN55024 CE
ORDERING INFORMATION
AT-2701FX/AA-xxx
100Mpbs Fast Ethernet fiber Netw
ork Interface Card (NIC)
AT-2701FTX/AA-xxx
100Mpbs Fast Ethernet dual fiber and copper NIC
AT-2746FX/AA-xxx
100Mpbs Fast Ethernet 10Mbps dual port fiber NIC
AA = ST, SC, MT-RJ, or VF-45 (for AT-2701FX/FTX)
Where
= SC/SC or ST/SC or ST/ST (for AT-2746FX)
Where xxx = 001 for single unit
= 020 for 20-unit pack
UTP INTERFACE
Connector Shielded RJ-45, MDI
10FL
Connectors
iber type Multi-mode fiber
F
SC
ST,
Output Power Minimum: -18.8dB
Typical: -15.8dBm Maximum: -13.8dB Maximum: -7.6dB
Receive Sens
ABOUT ALLIED TELESYN
Allied Telesyn was founded in 1987 with the goal of producing reliable, standards-based networking products. Focused on Ethernet/IP solutions geared to applications,Allied Telesyn offers access-edge products like switches, fiber/copper MAPs, and CPE.We’re also a leading global manufacturer of media con approach has made Allied Telesyn the ideal choice for IT professionals looking for high-quality, feature-rich network solutions at a lower price.Allied Telesyn – It’s Our Network,Too.
www.alliedtelesyn.com
© 2004 Allied Telesyn International Corp.All rights reserved. Information in this document is subject to change without notice. All company names, logos,and product designs that are trademarks or registered trademarks are the property of their respective owners.
617-00474-00 Rev. G
.
erters, unmanaged switches,and NICs. Our customer-driven
v
USA Headquarters 19800 North Creek Pkwy, Suite 200, Bothell, WA 98011, USA
Tel 800.424.4284 Fax 425.481.3895
European Headquar
ters
Via Motta 24,
6830 Chiasso, Switzerland
(Corporate) Tel (+41) 91 697.69.00 Fax (+41) 91 697.69.11
(European Sales) Tel (+39) 02 414.112.1 Fax (+39) 02 414.112.61
Loading...