Allied Telesis 295 User Manual
Specifications and Main Features
- This unit goes by the model number: 295 REGULAR
- The advised Mounting Height is 29 Inches
- The variety range of the mount height is 27 to 31 Inches
- The maximum lifting height can reach a total of 114 Inches
- In order to dump, the clear height is approximately around 97 Inches
- If the maximum height is reached, then 22 inches can be attained
- The maximum angle of dump is approximately 25 degrees
- In order to rollback the bucket the angle should not exceed 32 degrees
- Further digging is possible until the depth of 2 inches is achieved
- While in carry position, the overall height is 60.9 inches or around 5.2 feet
- While in the position of full height the rollback angle should not exceed 117 degrees
- The lifting capacity is estimated to be ASAE S301.2- 4.1.1
- The breakout force is estimated to be set as per ASAE S301.2 - 4.1.2
- There are various other specifications for the cylinder
- Firstly the bore set for the Bucket Cylinder is Bore-2.00, Rod-1.25, Stroke-20.63 Length (Extended) is 52.63 and Length (Retracted) is 32.00
- Secondly with the Lifting Cylinder, the Bore was set to 2.00 while the Rod is 1.50, the Stroke’s amount is 20.63, the length set (Extended) is 53.63 and length set (Retracted) is 33.00
- As specified in the manual, there are recommended specifications that detail the torque for different sizes of bolts in ft-lbs and NM
- There are various Terms and conditions regarding Warranty claiming defects in material and craftsmanship that are valid for a duration of twelve months.
Frequently Asked Questions
Q: For the 295 Loader, what is the maximum lift height?
A: As stated above, the total maximum lift height is 114 inches.
Q: What is the measurement of the bucket rollback angle?
A: The rollback angle measures around thirty-two degrees.
Q: What is the greatest penetration depth of the digging hay tool which is the specific attachment of the 295 Loader?
A: It has a penetration depth which is greater than two point two inches.
Q: What is the warranty policy for the 295 Loader?
A: The duration of the warranty shall correspond to twelve (12) months following the purchase date.
Q: Loader maintenance and inspection procedures?
A: Regular lubrication for the operational components in addition to inspection of the bolts for any signs of looseness and leakage are needed to ensure reliability of the components.
Q: What happens to the tractor’s performance when the weight is removed from the back end of the tractor when the tractor is paired with a loader?
A: Not really, weight at the back end of the tractor ensures better grip translating to loader performance enhancement.
Q: Why is the “Rollback angle at full height” so significant?
A: When considering material handling performance, the rollback angle at full height, which goes up to one hundred and seventeen degrees, plays a critical role by allowing improved load control.
User Manual
Loading...