AllerAir DS, DX, 6000 User Manual

A Message for the Client

FILTER

The model you have selected is shipped in 2 separate boxes to protect certain

ASSEMBLY

D, DS, DX &

6000 MODELS

Step 1

Make sure the unit is set to "Off," and unplug it. Lay the unit upside down, so that the wheels face up.

components. Th e filter comes in one b ox, and the outer she ll of the unit,

containing the motor and the fan, comes in another. Filters must be installed

before tu rning the unit on in order for it to wor k. AllerA ir techn icians

recommend removing the base, installing the filter, and replacing the base

according to the following steps:

Step 2

Using a #2 Philips screwdriver, remove the four screws that hold the base onto the unit.

HEPA

NEW

CARBON

Step 3

Grasp the wheels. Remove the base by pulling gently on the wheels.

FILTER

The model you have selected is shipped in 2 separate boxes to protect certain

ASSEMBLY

D, DS, DX &

6000 MODELS

Step 1

Make sure the unit is set to "Off," and unplug it. Lay the unit upside down, so that the wheels face up.

components. Th e filter comes in one b ox, and the outer she ll of the unit,

containing the motor and the fan, comes in another. Filters must be installed

before tu rning the unit on in order for it to wor k. A llerAir t echnician s

recommend removing the base, installing the filter, and replacing the base

according to the following steps:

Step 2

Using a #2 Philips screwdriver, remove the four screws that hold the base onto the unit.

HEPA

NEW

CARBON

Step 3

Grasp the wheels. Remove the base by pulling gently on the wheels.

Step 5

Gently insert the carbon filter

Step 4

Reach inside the unit, and remove only 1 of the 2 felt pads.

Step 7

Replace the base, making sure the arrow on the gold sticker lines up with unit's rear seam.

(either a Model D, DS or DX Carbon) into the unit, either end up.

For 6000 Carbon/Hepa Models

Insert carbon canister, then Hepa in center

Step 8

Replace the four screws.

Step 6

Put back the felt pad removed in

STEP 4.

Step 9

Turn the unit back onto its wheels. It is now ready for use.

AllerAir Industries Inc. Toll free: 1-888-852-8247 / Fax: 1-877-688-2193 www.allerair.com