Allen-Bradley 6155R-NPXPH, 6155R-7P2KH, 6155R-7SXPH, 6155R-7PXPH, 6155R-14SXPH User Manual
...
VersaView
Industrial
Non-display
Computers
Catalog Numbers 6155R-NSXPH,
6155R-NPXPH, 6155R-7SXPH,
6155R-7S2KH, 6155R-7PXPH,
6155R-7P2KH, 6155R-14SXPH,
6155R-14S2KH, 6155R-14PXPH,
6155R-14P2KH, 6155F-NPXPH,
6155F-NPXPHDC
User Manual
Important User Information
Solid state equipment has operational characteristics differing from those of
electromechanical equipment. Safety Guidelines for the Application,
Installation and Maintenance of Solid State Controls (publication SGI-1.1
available from your local Rockwell Automation sales office or online at
http://literature.rockwellautomation.com
) describes some important
differences between solid state equipment and hard-wired electromechanical
devices. Because of this difference, and also because of the wide variety of
uses for solid state equipment, all persons responsible for applying this
equipment must satisfy themselves that each intended application of this
equipment is acceptable.
In no event will Rockwell Automation, Inc. be responsible or liable for
indirect or consequential damages resulting from the use or application of
this equipment.
The examples and diagrams in this manual are included solely for illustrative
purposes. Because of the many variables and requirements associated with
any particular installation, Rockwell Automation, Inc. cannot assume
responsibility or liability for actual use based on the examples and diagrams.
No patent liability is assumed by Rockwell Automation, Inc. with respect to
use of information, circuits, equipment, or software described in this manual.
Reproduction of the contents of this manual, in whole or in part, without
written permission of Rockwell Automation, Inc., is prohibited.
Throughout this manual, when necessary, we use notes to make you aware
of safety considerations.
Allen-Bradley, Rockwell Automation, TechConnect, and VersaView are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
WARNING
Identifies information about practices or circumstances that can cause
an explosion in a hazardous environment, which may lead to personal
injury or death, property damage, or economic loss.
IMPORTANT
Identifies information that is critical for successful application and
understanding of the product.
ATTENTION
Identifies information about practices or circumstances that can lead
to personal injury or death, property damage, or economic loss.
Attentions help you identify a hazard, avoid a hazard, and recognize
the consequence
SHOCK HAZARD
Labels may be on or inside the equipment, for example, a drive or
motor, to alert people that dangerous voltage may be present.
BURN HAZARD
Labels may be on or inside the equipment, for example, a drive or
motor, to alert people that surfaces may reach dangerous
temperatures.
3 Publication 6155R-UM001G-EN-P - July 2007
Summary of Changes
The information below summarizes the changes made to this manual
since the last revision.
Revision bars, as shown in the margin, identify updated information.
These are the changes for this version of the document.
Topic Page
Operating system information updated. 9
Information on the Multilingual User
Interface CD Pack updated.
10
Updated parts list. 15
Publication 6155R-UM001G-EN-P - July 2007
4 Summary of Changes
5 Publication 6155R-UM001G-EN-P - July 2007
Table of Contents
Preface
Chapter 1
System Features
Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Computer Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Operating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Multilingual User Interface CD Pack. . . . . . . . . . . . . . . . . . . 10
Product Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Accessories and Replacement Parts . . . . . . . . . . . . . . . . . . . 11
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Chapter 2
Installation
Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
European Union Compliance. . . . . . . . . . . . . . . . . . . . . . . . 17
Environment and Enclosure Information . . . . . . . . . . . . . . . 18
Required Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Mounting Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Mounting Clearances. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Install the Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Product Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Connect the Keyboard and Mouse . . . . . . . . . . . . . . . . . . . . 28
Connect Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Connect to Network . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Chapter 3
Operation
Chapter Objective . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Operating Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Start the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Reset the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Universal Serial Bus (USB) Ports . . . . . . . . . . . . . . . . . . . . . 34
Chapter 4
Replace System Components
Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Accessories and Replacement Parts . . . . . . . . . . . . . . . . . . . 35
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Electrostatic Discharge (ESD) . . . . . . . . . . . . . . . . . . . . . . . 35
Remove the Cover. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Install Add-in Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Replace the Hard Disk Drive . . . . . . . . . . . . . . . . . . . . . . . . 41
Connect an External Drive. . . . . . . . . . . . . . . . . . . . . . . . . . 44
Add or Remove Memory . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Load a Memory Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Replace the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Replace the Fan Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Publication 6155R-UM001G-EN-P - July 2007
6 Table of Contents
Chapter 5
System Troubleshooting
Chapter Objectives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Troubleshooting Procedure . . . . . . . . . . . . . . . . . . . . . . . . . 51
Diagnostic Utility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Troubleshooting Check Lists . . . . . . . . . . . . . . . . . . . . . . . . 52
Ship or Transport the Product . . . . . . . . . . . . . . . . . . . . . . . 54
Appendix A - Specifications
Appendix B - Upgrade to a New BIOS
Index
7 Publication 6155R-UM001G-EN-P - July 2007
Preface
Read this preface to familiarize yourself with the rest of the manual.
The preface covers these topics:
• Intended audience
• Purpose of this manual
• Manual conventions
• Additional resources
Intended Audience
Use this manual if you are responsible for installing, using, or
troubleshooting the VersaView Industrial Non-display Computers.
Purpose of This Manual
This manual is a user guide for the VersaView Industrial Non-display
Computers. It gives an overview of the system and provides
procedures to perform these tasks:
• Install the computers
• Make computer connections
• Configure the computers
• Troubleshoot the computers
Manual Conventions
These conventions are used throughout this manual:
• Bulleted lists such as this one provide information, not
procedural steps.
• Numbered lists provide sequential steps.
Additional Resources
For additional information on the VersaView Industrial Non-display
Computers, refer to these publications.
These publications are on the VersaView Accessories/Cloning CD,
which ships with your computer. You can also download electronic
versions of these publications from the Rockwell Automation website
http://literature.rockwellautomation.com
.
Resource Description
VersaView Industrial Non-display
Computer Installation Instructions,
publication 6155R-IN001
Provides procedures on how to install the computer and
make connections to the computer.
Cloning Utility Technical Data,
publication 6000-TD001
Provides information on how to create and restore a backup
image of your computer’s hard drive.
Publication 6155R-UM001G-EN-P - July 2007
8 Preface
9 Publication 6155R-UM001G-EN-P - July 2007
Chapter
1
System Features
Chapter Objectives
This chapter provides an overview of the computer.
• Operating systems
• Multilingual user interface
• Product options
• Accessories and replacement parts
• Features
• Parts list
Computer Overview
The VersaView Industrial Non-display Computers run factory
operations from small visual interface and maintenance applications to
large control and information applications. These computers operate
in rugged environments where endurance to high-temperature, shock,
and vibration is critical. Combine the VersaView 200R, 700R, or 1400R
computer with any VersaView monitor to complete your system.
Most of the computers are available with the Windows 2000 or
Windows XP operating system, and offer standard or performance
features. All of the computers come standard with Ethernet and serial
ports.
For the less rugged environments where endurance to
high-temperature, shock, and vibration is not as critical, Rockwell
Automation offers a line of light industrial computers and monitors.
Operating Systems
The computers are shipped with one of these operating systems:
• Windows 2000 Professional, Service Pack 4 with Update
Rollup 1
• Windows XP Professional, Service Pack 2b
No operating system updates have been applied to the factory image
beyond the service packs.
For your convenience, the I386 source directory for Microsoft
Windows is on the system drive of your computer off the root
directory, C:\I386. This allows for easy removal and addition of
Windows components.
Publication 6155R-UM001G-EN-P - July 2007
10 System Features
Computers with rotating-media hard drives include a recovery
partition on the system drive containing the original factory image.
You can use the supplied System Accessories/Cloning CD to restore
the operating system from the recovery partition, create a new
recovery image, and create bootable external recovery media.
Refer to the Cloning Utility documentation, publication 6000-TD001,
for instructions. You can view or download publications at
http://literature.rockwellautomation.com
.
Computers with solid state drives have been customized to
accommodate the unique properties of the solid state drive. Some of
the pre-installed customizations include:
• no paging file.
• system restore set to zero and disabled.
• DLLCACHE directory emptied.
Computers with solid state hard drives do not contain a recovery
partition. If additional drive space is required, copy the I386 directory
to external media; then delete the I386 directory from C:\I386, which
is approximately 400 MB.
To obtain the original factory image on bootable external recovery
media, which also includes the I386 source directory, contact your
local technical support center.
Multilingual User Interface
CD Pack
The Microsoft Multilingual User Interface (MUI) CD Pack contains a
collection of different language sets that can be installed into the
operating system. MUI packs are available for all Windows XP
operating systems and provide a localized start menu and system
icons support.
The instructions for installing MUI languages on your computer are
supplied with the MUI CD Pack.
Publication 6155R-UM001G-EN-P - July 2007
System Features 11
Product Options
The table summarizes the product options available for the VersaView
Industrial Non-display Computers.
Accessories and
Replacement Parts
You can view a current list of accessories at this Rockwell Automation
Allen-Bradley website http://www.ab.com/industrialcomputers
.
Cat. No. Model Series Package Storage Device Operating System
6155R-NPXPH
200R
D Performance Hard drive
Windows XP
6155R-NSXPH D Standard Hard drive
6155F-NPXPH D
Performance Solid state drive
Windows XP for solid-state
drives
6155F-NPXPHDC
(1)
D
6155R-7P2KH
700R
C Performance Hard drive
Windows 2000
6155R-7S2KH C Standard Hard drive
6155R-7PXPH C Performance Hard drive
Windows XP
6155R-7SXPH C Standard Hard drive
6155R-14P2KH
1400R
C Performance Hard drive
Windows 2000
6155R-14S2KH C Standard Hard drive
6155R-14PXPH C Performance Hard drive
Windows XP
6155R-14SXPH C Standard Hard drive
(1)
This model operates from dc power.
Publication 6155R-UM001G-EN-P - July 2007
12 System Features
Features
The illustrations show the features of each computer.
VersaView 200R Computer
The performance model is shown.
4
6
7
5
3
9
1
2
8
10
11
12
Item Component Item Component
1
Power input, ac or dc
(1)
(1)
Model dependent.
7 Audio line out
2
Power switch 8 PS/2 keyboard and mouse port
3
Serial COM ports, 2 9 CompactFlash card slot
4
VGA port 10 Power and HDD indicators
5
Ethernet ports (RJ45), 1 or 2
(2)
(2)
Standard models have one port. Performance models have two ports.
11 Reset switch
6
USB ports, 4 12 Hard disk drive
Publication 6155R-UM001G-EN-P - July 2007
System Features 13
VersaView 700R Computer
Item Description Item Description
1 Floppy drive 7 Audio connector
2 CD drive 8 Ethernet port (RJ45)
3 Power switch 9 PS/2 keyboard or mouse port
4 Parallel printer port 10 Power input, ac
5 Serial COM ports, 2 11 USB port
6 VGA port
2
1
3
4
5
6
8
9
10
7
11
Publication 6155R-UM001G-EN-P - July 2007
14 System Features
VersaView 1400R Computer
Item Description Item Description
1 Floppy drive 7 Audio connector
2 CD drive 8 Ethernet port (RJ45)
3 Power switch 9 PS/2 keyboard or mouse port
4 Parallel printer port 10 USB port
5 Serial COM ports, 2 11 Power input, ac
6 VGA port
1
2
3
11
6
8
9
7
10
4
5
Publication 6155R-UM001G-EN-P - July 2007
System Features 15
Before You Begin
Before unpacking the product, inspect the shipping carton for
damage. If damage is visible, immediately contact the shipper and
request assistance. Otherwise, proceed with unpacking.
Keep the original packing material in case you need to return the
product for repair or transport it to another location. Use both the
inner and outer packing cartons to provide adequate protection for a
unit returned for service.
Parts List
The computers ship with these items:
• VersaView System Accessories/Cloning CD
• VersaView System Support CD
• Microsoft Multilingual User Interface (MUI) CD Pack
This CD pack is not included with VersaView computers
containing a solid-state hard drive or VersaView computers with
the Windows 2000 operating system.
• Installation instructions
• Power cord, ac, where applicable
• PS/2 adapter cable to connect both a keyboard and a mouse
• Mounting hardware
Publication 6155R-UM001G-EN-P - July 2007
16 System Features
17 Publication 6155R-UM001G-EN-P - July 2007
Chapter
2
Installation
Chapter Objectives
This chapter shows how to install your computer on a machine, wall,
DIN rail, or rack, and how to make computer connections.
Review each mounting type and the product dimensions before
installation.
European Union
Compliance
This product meets the European Union Directive requirements when
installed within the European Union or EEA regions and have the CE
mark. A copy of the Declaration of Conformity is available at the
Rockwell Automation website
http://rockwellautomation.com/products/certification
.
ATTENTION
This product is intended to operate in an industrial or control
room environment, which utilizes some form of power isolation
from the public low-voltage mains. Some computer
configurations may not comply with the EN 61000-3-2
Harmonic Emissions standard as specified by the EMC
Directive of the European Union. Obtain permission from the
local power authority before connecting any computer
configuration that draws more than 75 Watts of ac power
directly from the public mains.
ATTENTION
To comply with EN 55024 and EN 61000-6-2, the Ethernet port
LAN cable must be less than 30 m (98.42 ft) and used only
indoors, not exit the building at any point. All other I/O cables
must be less than 3 m (9.84 ft) and used only indoors.
Publication 6155R-UM001G-EN-P - July 2007
18 Installation
Environment and Enclosure
Information
Review the information on enclosures and environments before
installing the product.
Required Tools
These tools are required to rack- or machine-mount your computer.
• #2 Phillips screwdriver
• Drill motor and drill bit
ATTENTION
Environment and Enclosure
This equipment is intended for use in a Pollution Degree 2
industrial environment, in overvoltage Category II applications
(as defined in IEC publication 60664-1), at altitudes up to
2000 m (6561 ft) without derating.
This equipment is considered Group 1, Class A industrial
equipment according to IEC/CISPR Publication 11. Without
appropriate precautions, there may be potential difficulties
ensuring electromagnetic compatibility in other environments
due to conducted as well as radiated disturbance.
This equipment is supplied as open type equipment. UL
Recognized equipment must be mounted within an enclosure
that is suitably designed for those specific environmental
conditions that will be present and appropriately designed to
prevent personal injury resulting from accessibility to live
parts. The interior of the enclosure must be accessible only by
the use of a tool. UL listed equipment does not need to be
mounted inside another enclosure. Subsequent sections of this
publication may contain additional information regarding
specific enclosure type ratings that are required to comply with
certain product safety certifications.
In addition to this publication, see:
• Industrial Automation Wiring and Grounding Guidelines, for
additional installation requirements, publication 1770-4.1.
• NEMA Standards publication 250 and IEC publication 60529, as
applicable, for explanations of the degrees of protection provided
by different types of enclosure.
Publication 6155R-UM001G-EN-P - July 2007
Installation 19
Mounting Hardware
The table lists the hardware required to mount each computer.
Mounting Clearances
Review the product dimensions to make sure you allow adequate
clearance on the sides and rear of the computer for ventilation and
cable connections. You must also be able to remove the covers to
install or remove peripheral components.
When mounted in an enclosure or high temperature area, the ambient
temperature around the computer must not exceed the operating
temperature range.
Install the Computer
The computers support various mounting options.
• Machine mount (200R and 700R)
• Wall mount the (200R)
• DIN rail mount (200R)
• Rack mount (1400R)
• VESA mount (200R)
Item Quantity Use To This Computer
Wall or machine
mounting brackets
2 Wall or machine mount VersaView 200R
VersaView 700R
VESA mounting
bracket
1 VESA mount VersaView 200R
DIN rail bracket 1 DIN rail mount VersaView 200R
Mounting screws
or nuts
8 Wall, machine, DIN rail,
rack slide, or VESA mount
VersaView 700R
12 VersaView 1400R
24 VersaView 200R
Rack handles 2 Rack mount VersaView 1400R
Publication 6155R-UM001G-EN-P - July 2007
20 Installation
Mount the Computer on a Machine
You can mount the VersaView 200R and 700R computers on a shelf
inside a machine by using mounting brackets. The brackets secure the
computer to the shelf.
1. Attach the two mounting brackets to the bottom of the computer
by using four of the provided screws.
For the 200R computer, use four of the M3 x 5 mm panhead
screws, and torque to 0.678 Nm (6 lb-in).
2. Drill holes in the shelf that correspond to holes in the mounting
brackets.
• The 200R requires four holes.
• The 700R requires eight holes.
Dimensions are in mm (in.).
VersaView 200R
34.5 [1.36]
192 [7.57]
92 [3.62]
Loading...