Allen-Bradley 20-750-APS, 20-750-S1, 20-750-2262C-2R, 20-750-S, 20-750-2263C-1R2T Installation Instructions Manual

...
Installation Instructions
20-750-S
20-750-S1
20-750-2262C-2R 20-750-2263C-1R2T 20-750-2262D-2R
20-750-1132C-2R 20-750-1133C-1R2T 20-750-1132D-2R
20-750-ENC-1 20-750-DENC-1
20-750-UFB-1
20-750-ATEX
20-750-S1
20-750-DENC-1
IMPORTANT: When a Safe Speed Monitor option (20-750-S1) is used with a Dual Incremental Encoder option (20-750-DENC-1) both modules must be installed on the same backplane (ports 6, 5, 4).
IMPORTANT: Only one safety option module can be installed at a time. Multiple safety options or duplicate safety option installations are not supported.
PowerFlex 750-Series Option Modules
These instructions cover the installation of the option modules listed below. For instructions on installing Network Communication option modules, refer to publication 750COM-IN002

Compatible Ports

PowerFlex 753 Drives PowerFlex 755 Drives
Option Module Cat. No. 20-750-
APS See Page 2 See Page 2 See Page 2 Yes No No No No 2262C-2R, 2263C-1R2T, 2262D-2R No Ye s Ye s Yes Ye s Ye s No Yes Ye s Ye s Yes Ye s Ye s Yes 1132C-2R, 1133C-1R2T, 1132D-2R No Ye s Ye s Yes Ye s Ye s No Yes Ye s Ye s Yes Ye s Ye s Yes 1132C-2R, 1133C-1R2T, 1132D-2R
with 20-750-ATEX installed ENC-1 No Ye s Ye s Yes Ye s Ye s No Yes Ye s Ye s Yes Ye s Ye s Yes UFB-1 Not Supported No Ye s Ye s No No Yes Ye s Ye s S Yes Ye s Ye s Yes Ye s Ye s Ye s Yes Ye s Ye s Yes Ye s Ye s Yes
(2)
S1
(2)
DENC-1
(1) For detailed instructions on installation of 11-Series I/O with the ATEX option module, refer to the PowerFlex 750-Series ATEX User Manual, publication 750-UM003. (2) See Using 20-750-S1 with 20-750-DENC-1.
(1)
Frame 1 Ports Frame 2…7 Ports Frame 1 Ports Frame 2…10 Ports
No Ye s Ye s No Yes Ye s No Ye s Yes No No No Yes Ye s
Yes Ye s Ye s Yes Ye s Ye s Ye s Yes Ye s No No Yes Ye s Ye s No Ye s Ye s Yes Ye s Ye s No Yes Ye s Ye s Yes Ye s Ye s Yes
.

Option Module Installation Using 20-750-S1 with 20-750-DENC-1

0.45 N•m (4.0 lb•in)
www.rockwellautomation.com
Americas: Rockwell Automation, 1201 South Second Street,
Milwaukee, WI 53204-2496 USA,
Tel:
(1) 414.382.2000, Fax: (1) 414.382.4444
Europe
/
Middle East/Africa: Rockwell Automati
on,
Pegasus Park, De Kleetlaan 12a,
1831 Diegem, Belgium,
Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Power, Control and Information Solutions Headquarters
*PN-311992*
PN-311992

Auxiliary Power Supply (20-750-APS) Installation

Detail A
Profibus Option Module
A connector cable is provided with Auxiliary Power Supply option module for use in PowerFlex 753 Drives and in PowerFlex 755 Frame 1 drives. The cable is used to connect the module to the backplane when installed on the upper control pod brackets.
IMPORTANT: Do not use the Auxiliary Power Supply option module with Frame 8 and larger drives. Refer to the PowerFlex 750-Series AC Drives Installation Instructions, publication 750-IN001 external power supply to Frame 8 and larger drives.
for information on connecting an

Option Module Installation next to a Profibus Option Module

If a PowerFlex 20-750-PBUS Profibus option module resides in the adjacent port to the right of the port in which the new module is being installed, the lower T15 Torx™ head mounting screw (see Detail A) of the new module may electrically contact the metal Profibus cable connector attached to the Profibus option module. This may cause faulty operation. To help prevent this, perform the steps below. If a PowerFlex 20-750-PBUS Profibus option module is not in that port, disregard these steps.
1. Remove the lower T15 Torx head mounting screw shown in Detail A, from the new module being installed.
To remove the captive T15 Torx head screw, the module must be removed to back the screw out of the mounting clip.
2. Replace the larger T15 Torx head screw with the smaller spare T8 Torx head mounting screw that was shipped with the PowerFlex 20-750-PBUS Profibus option module.
U.S. Allen-Bradley Drives Technical Support - Tel: (1) 262.512.8176, Fax: (1) 262.512.2222, E-mail: support@drives.ra.rockwell.com, Online: www.ab.com/support/abdrives
Publication 750-IN002F-MU-P – April 2015
Supersedes 750-IN002E-MU-P – July 2013 Copyright © 2015 Rockwell Automation, Inc. All rights reserved. Printed in USA.
Loading...