Allen-Bradley 1762-OX6I Quick Start Guide

Publication 1761-SG001G-EN-P - August 2015

14 MicroLogix Controller System-selection Checklist

MicroLogix Controller
System-selection Checklist

Use the following checklist as a guide to completing your own system specification. Skip any
sections that do not apply.

✔ Step See

1

Select Family: MicroLogix 1000, 1200 or 1500 Controller

• controller family - based on memory, I/O, added functionality, programming instructions and
dimensions

• consider future expansion requirements

• consider requirement for online editing

• consider the need for networked communication

page 17

Select Family: MicroLogix 1100 or 1400 Controller

• controller family - based on memory, I/O, added functionality, programming instructions and
dimensions

• consider future expansion requirements

• consider requirement for online editing

• consider the need for networked communication

p

age 21

2

Select Communication

• communication network - based on application requirementscommunication network - based

on application requirements

• communication interface device - if required

page 33

3

Select Programming Tools and Software

• programming software - the appropriate RSLogix package for your application

• programming software - the appropriate RSLogix package for your application

page 38

4

Select Network and Programming Cables

cables - review device port identification to find cable in the selection chart)

page 39

5

Select MicroLogix 1000 Controllers

controller - review power and I/O configurations to select a controller catalog number; see power

supply and I/O specification for more detailed information

page 41

6

Select MicroLogix 1100 Controllers

• controller - review power and I/O configurations to select a controller catalog number; see
power supply and I/O specification for more detailed information

• accessories - memory modules

page 47

7

Select MicroLogix 1100 Expansion I/O

I/O modules - digital, analog, and temperature

page 51

8

Select MicroLogix 1200 Controllers

• controller - review power and I/O configurations to select a controller catalog number; see

power supply and I/O specifications for more detailed information

• accessories - memory and real-time clock modules

page 59

9

Select MicroLogix 1200 Expansion I/O

• I/O modules - digital, analog, and temperature

• perform system expansion calculations

p

age 62

10

Select MicroLogix 1400 Controllers

• I/O modules - digital, analog, and temperature

• perform system expansion calculations

p

age 65

11

Select MicroLogix 1400 Expansion I/O

I/O modules - digital, analog, and temperature

page 70

12

Select MicroLogix 1500 Controllers

• base unit - review power and I/O configurations to select a catalog number; see power

supply and I/O specifications for more detailed information

• processor - see notes at Step 1

• accessories - data access tool; real-time clock and memory modules

page 71

13

Select MicroLogix 1500 System Expansion Components

• I/O modules - digital, analog, temperature and high-speed counter

• communication modules - DPI SCANport and DeviceNet

• power supplies, cables and end caps

• perform system expansion calculations

p

age 75

Publication 1761-SG001G-EN-P - August 2015

Select Family: MicroLogix 1000, 1200 or 1500 Controller 19

Controller Specifications

Controller General Specifications

Attribute MicroLogix 1000

(Bulletin 1761)

MicroLogix 1200
(Bulletin 1762)

MicroLogix 1500
(Bulletin 1764)

Memory Size and Type 1 KB EEPROM (approximately

737 instruction words, 437
data words)

6 KB flash memory: 4 KB user
program, 2 KB user data

1764-LSP processor: 7 KB user
memory (total user program
plus data)

1764-LRP processor: 14 KB
user memory (total user
program plus data)

Data Elements 512 internal bits, 40 timers, 32

counters, 16 control files, 105
integer files, 33 diagnostic
status

configurable, user-defined file
structure, 2 KB max data size

configurable, user-defined file
structure, 4 KB max data size

Throughput 1.5 ms (for a typical

500-instruction program)

(1)

2 ms (for a typical 1 KB word
user program)

(2)

1 ms (for a typical 1 KB word
user program)

(2)

(1) A typical program contains 360 contacts, 125 coils, 7 timers, 3 counters, and 5 comparison instructions.

(2) A typical user program contains bit, timer, counter, math, and file instructions.

Environmental Specifications and Certifications

Attribute 1761 Controllers 1762 Controllers 1764 Controllers

Operating Temperature Horizontal mounting:

0…55 °C (32…131 °F)

Vertical mounting

(1)

:
0 °C…45 °C (32 °F…113 °F)
for digital I/O,
0 °C…40 °C (32 °F…104 °F)
for analog I/O

0…55 °C (32…131 °F) 0…55 °C (32…131 °F)

Storage Temperature -40…85 °C (-40…185 °F) -40…85 °C (-40…185 °F)

-40…85 °C (-40…185 °F)

(2)

Relative Humidity 5…95%, noncondensing 5…95%, noncondensing 5…95%, noncondensing

Vibration Operating: 5 Hz…2 kHz, 0.381

mm (0.015 in.) peak-to-peak,

2.5 g panel mounted

(3)

, 1 hr
per axis
Nonoperating: 5 Hz…2 kHz,

0.762 mm (0.030 in.)
peak-to-peak, 5 g, 1 hr per axis

10…500 Hz, 5 g, 0.030 in. max
peak-to-peak, 2 hours each
axis
(Relay Operation: 1.5 g)

10…500 Hz, 5 g, 0.030 in. max
peak-to-peak (Relay
Operation: 2 g)

Shock, Operating 10 and 16 Point Controllers:

10 g peak acceleration (7.5 g
DIN rail mounted) (11 ± 1 ms
duration) 3 times each
direction, each axis

32 Point and Analog
Controllers:

7.5 g peak acceleration (5.0 g
DIN rail mounted) (11 ± 1 ms
duration) 3 times each
direction, each axis

30 g; 3 pulses each direction,
each axis
(Relay Operation: 7 g)

without Data Access Tool
installed:

30 g panel mounted (15 g DIN
Rail mounted)
Relay operation: 7.5 g panel
mounted (5 g DIN Rail
mounted)

with Data Access Tool
installed:
20 g panel mounted (15 g DIN
Rail mounted)
Relay operation: 7.5 g panel
mounted (5 g DIN Rail
mounted)

Publication 1761-SG001G-EN-P - August 2015

20 Select Family: MicroLogix 1000, 1200 or 1500 Controller

Shock, Nonoperating 10 and 16 Point Controllers:

20g peak acceleration (11 ± 1
ms duration), 3 times each
direction, each axis

32 Point and Analog
Controllers:
20g peak acceleration (11 ± 1
ms duration), 3 times each
direction, each axis

50 g panel mounted (40 g DIN
Rail mounted); 3 pulses each
direction, each axis

without Data Access Tool
installed:

40 g panel mounted (30 g DIN
Rail mounted)

with Data Access Tool
installed:
30 g panel mounted (20 g DIN
Rail mounted)

Agency Certification • UL Listed Industrial Control Equipment for use in Class 1, Division 2, Hazardous

Locations, Groups A, B, C, D

• C-UL Listed Industrial Control Equipment for use in Canada

• CE marked for all applicable directives

• RCM marked for all applicable acts

• EAC certified for all applicable directives

Electrical/EMC The controller has passed testing at the following level

ESD Immunity EN 61000-4-2

8 kV

EN 61000-4-2
4 kV contact, 8 kV air, 4 kV indirect

Radiated Immunity

Radiated RF Immunity EN 61000-4-3

10 V/m, 27…1000 MHz,
3 V/m, 87…108 MHz,
174…230 MHz, and
470…790 MHz

EN 61000-4-3
10 V/m, 80…1000 MHz, 80% amplitude modulation, +900 MHz
keyed carrier

Electronic Fast
Transient/Burst (EFT/B)
Immunity

EN 61000-4-4
Power Supply, I/O: 2 kV
Communication: 1 kV

EN 61000-4-4
Power Supply, I/O: 2 kV, 5 kHz
Communication Cable: 1 kV, 5 kHz

Surge Transient
Immunity

EN 61000-4-5
Communication: 1 kV galvanic
gun
I/O: 2 kV CM (Common mode),
1 kV DM (Differential mode)
AC Power Supply: 4 kV CM
(Common mode), 1 kV DM
(Differential mode)

EN 61000-4-5
Communication: 1 kV galvanic gun
I/O: 2 kV CM (common mode), 1 kV DM (differential mode)
AC Power Supply: 4 kV CM (Common mode), 2 kV DM
(Differential mode)
DC Power Supply: 500V CM (Common mode), 500V DM
(Differential mode)

Conducted RF Immunity EN 61000-4-6

Power Supply, I/O: 10V, 150
kHz…30 MHz
Communication Cable 3V

EN 61000-4-6
Power Supply, I/O: 10V
Communication Cable 3V

(1) DC input voltage derated linearly from 30 °C (86 °F) (30…26.4V).

(2) Recommended storage temperature for maximum battery life (5 years typical with normal operating/storage conditions) of Real-time

Clock modules is -40…40 °C (-40…104 °F). Battery life can be significantly shorter at elevated temperatures. Applies to 1762-RTC,
1762-MM1RTC, 1764-RTC, 1764-MM1RTC, and 1764-MM2RTC devices.

(3) DIN rail mounted controller is 1 g.

Environmental Specifications and Certifications

Attribute 1761 Controllers 1762 Controllers 1764 Controllers

Publication 1761-SG001G-EN-P - August 2015

52 Select MicroLogix 1100 Expansion I/O

Available Modules

1762 Expansion I/O Modules

Cat. No. Description

Digital

1762-IA8 8-Point 120V AC Input Module

1762-IQ8 8-Point Sink/Source 24V DC Input Module

1762-IQ8OW6 8 Point Sink/Source 24V DC Input/6-Point AC/DC Relay Output Combination

Module

1762-IQ16 16-Point Sink/Source 24V DC Input Module

1762-OA8 8-Point 120/240V AC Triac Output Module

1762-OB8 8-Point Sourcing 24V DC Output Module

1762-OB16 16-Point Sourcing 24V DC Output Module

1762-OW8 8-Point AC/DC Relay Output Module

1762-OW16 16-Point AC/DC Relay Output Module

1762-OX6I 6-Point Isolated AC/DC Relay Output Module

1762-OV32T 32-Point Solid State 24V DC Sink Output Module

1762-OB32T 32-Point Solid State 24V DC Source Output Module

1762-IQ32T 32-Point DC Input Module

Analog

1762-IF4 4-Channel Voltage/Current Analog Input Module

1762-OF4 4-Channel Voltage/Current Analog Output Module

1762-IF2OF2 Combination 2-Channel Input 2-Channel Output Voltage/Current Analog Module

Specialty

1762-IR4 4-Channel RTD/Resistance Input Module

1762-IT4 4-Channel Thermocouple/mV Input Module

Publication 1761-SG001G-EN-P - August 2015

56 Select MicroLogix 1100 Expansion I/O

1762 Digital Expansion Relay Output Modules Specifications

1762 Analog Modules

1762 Analog Expansion Modules Common Specifications

Attribute 1762-IQ8OW6 (outputs) 1762-OW8 1762-OW16 1762-OX6I

Voltage Category AC/DC normally open relay AC/DC normally open relay AC/DC normally open relay AC/DC Type C Relay

Operating Voltage Range 5…265V AC

5…125V DC

5…265V AC
5…125V DC

5…265V AC
5…125V DC

5…265V AC
5…125V DC

Number of Outputs 6 8 16 6 (N.C., N.O.)

Number of Commons inputs: 2

outputs: 1

2 2 6

Bus Current Draw, max 110 mA @ 5V DC (0.55 W)

80 mA @ 24V DC (1.92 W)

80 mA @ 5V DC (0.40 W)
90 mA @ 24V DC (2.16 W)

140 mA @ 5V DC (0.70 W)
180 mA @ 24V DC (4.32

W)

(1)

(1) Only applicable to Series B I/O modules

110 mA @ 5V DC (0.55 W)
110 mA @ 24V DC (2.64
W)

Heat Dissipation, max 5.0 Total Watts @ 30V

4.4 Total Watts @ 26.4V

2.9 Total Watts

6.1 Watts

(1)

2.8 Watts

Signal Delay, max - resistive load On Delay: 10 ms

Off Delay: 10 ms

On Delay: 10 ms
Off Delay: 10 ms

On Delay: 10 ms
Off Delay: 10 ms

On Delay: 10 ms
Off Delay: 20 ms

Off-state Leakage, max 0 mA 0 mA 0 mA 0 mA

On-state Current, min 10 mA @ 5V DC 10 mA @ 5V DC 10 mA 100 mA

On-state Voltage Drop, max N/A N/A N/A N/A

Continuous Current per Point, max 2.5 A (Also see MicroLogix 1500

Controller Relay Contact Rating on page 73.) 7 A (Also see MicroLogix

1500 Controller Relay
Contact Rating on page

73.)

Continuous Current per Common, max 8 A 8 A 8 A 7 A (Also see MicroLogix

1500 Controller Relay
Contact Rating on page

73.)

Continuous Current per Module, max 8 A 16 A 16 A 30 A

Surge Current, max See MicroLogix 1500 Controller Relay Contact Rating on page 73.

Attribute 1762-IF4 1762-IF2OF2 1762-OF4

Bus Current Draw, max 40 mA @ 5V DC

50 mA @ 24V DC

40 mA @ 5V DC
105 mA @ 24V DC

40 mA @ 5V DC
165 mA @ 24V DC

Analog Normal Operating Range Voltage: -10…10V DC

Current: 4…20 mA

Voltage: 0…10V DC
Current: 4…20 mA

Voltage: 0…0V DC
Current: 4…20 mA

Full Scale

(1)

Analog Ranges

Voltage: -10.5…10.5V DC
Current: -21…21 mA

Voltage: 0…0.5V DC
Current: 0…21 mA

Voltage: 0…0.5V DC
Current: 0…21 mA

Resolution

15 bits (bipolar)

(2)

12 bits (unipolar) 12 bits (unipolar)

Repeatability

(3)

±0.12%

(2)

±0.12%

(2)

±0.12%

(2)

Input and Output Group to
System Isolation

30V AC/30V DC rated working voltage

(4)

(N.E.C. Class 2 required)
(IEC Class 2 reinforced insulation)
type test: 500V AC or 707V DC for 1 minute

30V AC/30V DC rated working voltage
(IEC Class 2 reinforced insulation)
type test: 500V AC or 707V DC for 1 minute

(1) The over- or under-range flag is set when the normal operating range is exceeded. The module continues to convert the analog input up to the maximum full scale range.

(2) Only applicable to Series B I/O modules.

(3) Repeatability is the ability of the input module to register the same reading in successive measurements for the same input signal.

Publication 1761-SG001G-EN-P - August 2015

Perform MicroLogix 1200 Controller System Expansion Calculations 63

Perform MicroLogix 1200
Controller System
Expansion Calculations

A download is also available for system validation. On the Internet, go to
http://www.ab.com/micrologix.

To have a valid system, both current and power requirements must be satisfied. Use the
following worksheets to make your calculations.

Follow these steps to verify the controller power supply loading.

1. Use the following table to select the components for your system. Do not exceed the

MAXIMUM LIMIT for the number of I/O modules.

2. Fill in the current amounts and add up the TOTAL CALCULATED CURRENT.

MicroLogix 1200 Controller Power Supply Loading - Calculate System Current

Cat. No. Bus Current Draw Attribute Calculated Current for System

at 5V DC (mA) at 24V DC (mA) at 5V DC (mA) at 24V DC (mA)

1761-NET-AIC

(1)(2)

0

120

(2)

1761-NET-ENI, 1761-NET-ENIW

(1)(2)

0

100

(2)

2707-MVH232 or 2707-MVP232

(1)(2)

0

80

(2)

Cat. No. n = Number of Modules

(6 max)

A B n x A n x B

1762-IA8 50 0

1762-IQ8 50 0

1762-IQ8OW6 110 80

1762-IQ16 (Series A) 60 0

1762-OA8 115 0

1762-OB8 115 0

1762-OB16 175 0

1762-OW8 80 90

1762-OW16 (Series A) 120 140

1762-OX6I 110 110

1762-IF2OF2 40 105

1762-IF4 40 50

1762-OF4 40 165

1762-IR4 40 50

1762-IT4 40 50

1762-OV32T 175 0

1762-OB32T 175 0

1762-IQ32T 170 0

1762-IQ16 (Series B) 70 0

1762-OW16 (Series B) 140 180

TOTAL MODULES: TOTAL CALCULATED CURRENT: (C) (D)

For 1762-L24BWA, 1762-L40BWA, 1762-L24BWAR, and 1762-L40BWAR only,
add sum of any User 24V DC Sensor Current

(E)

(1) These are optional accessories. Current is consumed only if the accessory is installed.

(2) Current for the 1761-NET-AIC or 1761-NET-ENI(W) can be supplied by the controller’s communication port or from an external 24V DC source. No current is consumed from

the controller when a user-suppled, external source is used. If an external source is to be used, do not select the device here. The current for a 2707-MVH232 or
2707-MVP232 MicroView Operator Interface is supplied from the controller’s communication port, if directly connected.