Allen-Bradley 1732E-16CFGM12P5QCWR, 1732E-12X4M12P5QCDR, 1732E-12X4M12QCDR, 1732E-16CFGM12QCWR Wiring Diagrams

Wiring Diagrams

1 2

4

5

3

(View into connector)
Pin 1 Sensor source voltage
Pin 2 Input B
Pin 3 Return
Pin 4 Input A
Pin 5 PE

44807

ArmorBlock 2-Port EtherNet with Diagnostics
and QuickConnect

Catalog Numbers 1732E-12X4M12QCDR, 1732E-12X4M12P5QCDR

Parts List

Your package contains one 1732E ArmorBlock™ module and these pinout guide
wiring instructions.

For complete installation instructions, refer to the Module Publication Number
table and visit http://www.rockwellautomation.com/literature/

Module Publication Number

Module Publication Number

1732E ArmorBlock 2-Port EtherNet/IP Modules
with QuickConnect

ATTENTION: Two sets of mounting holes are used to mount the module
directly to a panel or machine. Mounting holes accommodate #8 (M4) pan
head screws. The torque specification is 1.13 Nm (10 lb-in.).

.

1732E-IN010

I/O Connectors

Micro-style 5-Pin Input Female Connector

2 ArmorBlock 2-Port EtherNet with Diagnostics and QuickConnect

TIP

1 2

4

5

3

(View into connector)
Pin 1 Not used
Pin 2 Output B
Pin 3 Return
Pin 4 Output A
Pin 5 PE

44807

(View into connector 1)
Pin 1 M12_Tx+
Pin 2 M12_Rx+
Pin 3 M12_Tx­Pin 4 M12_Rx­Pin 5 Connector shell
shield GND

45793

(View into connector 2)
Pin 1 M12_Rx+
Pin 2 M12_Tx+
Pin 3 M12_Rx­Pin 4 M12_Tx­Pin 5 Connector shell
shield GND

44809

(View into receptacle)
Pin 1 Output power+
Pin 2 Sensor/MDL power+
Pin 3 Sensor/MDL power­Pin 4 Output power-

45677

Male Input Female Output

46199

(View into receptacle)
Pin 1 Output power­Pin 2 Sensor/MDL power­Pin 3 Protective Earth
Pin 4 Sensor/MDL power+
Pin 5 Output power+

46200

Male Input Female Output

Micro-style 5-Pin Output Female Connector

EtherNet/IP Connector

D-Code Micro Network Female Connector

5

1

4

2

3

Auxiliary Power Connector

Mini-style 4-Pin Receptacles

4 2

3 1

Mini-style 5-Pin Receptacles

1

2

Publication

5

4

3

The ground for both module power and output power are shared.

1732E-WD004D-EN-P - October 2015

4

5

42

31

1

2

3

ArmorBlock 2-Port EtherNet with Diagnostics and QuickConnect 3

Specifications

Environmental Specifications

Attribute Value

Temperature, operating IEC60068-2-1 (Test Ad, Operating Cold),

Temperature, ambient, max 60 °C (140 °F)
Voltage, operating 12…30V DC
Output current, per port 0.5 A
Enclosure type rating Meets IP65/66/67/69K (when marked), and Type 4X Indoor

Certifications

IEC60068-2-2, (Test Bd, Operating Dry Heat),
IEC 60068-2-14 (Test Nb, Operating Thermal Shock):

-20...60 °C (-4…140 °F)

Use Only, with receptacle dust caps or cable termination

Certification (when
product is marked)

c-UR-us UL Recognized Industrial Control Equipment, certified for US and

CE European Union 2004/108/EC EMC Directive, compliant with:

C-Tick Australian Radiocommunications Act, compliant with:

EtherNet/IP ODVA conformance tested to Ethernet/IP specifications.
KC Korean Registration of Broadcasting and Communications

(1)

See the Product Certification link at http://www.rockwellautomation.com/products/certification/ for
Declaration of Conformity, Certificates, and other certification details.

Value

(1)

Canada. See UL File E322657.

EN 61326-1; Meas./Control/Lab., Industrial Requirements
EN 61000-6-2; Industrial Immunity
EN 61000-6-4; Industrial Emissions
EN 61131-2; Programmable Controllers (Clause 8, Zone A & B)

AS/NZS CISPR 11; Industrial Emissions

Equipment, compliant with:
Article 58-2 of Radio Waves Act, Clause 3

Publication

1732E-WD004D-EN-P - October 2015

Rockwell Automation Support

Rockwell Automation provides technical information on the W eb to assist you in using
its products. At http://www.rockwellautomation.com/support/

, you can find technical
manuals, a knowledge base of FAQs, technical and application notes, sample code and
links to software service packs, and a MySupport feature that you can customize to
make the best use of these tools.

For an additional level of technical phone support for installation, configuration, and
troubleshooting, we offer T echConnect support programs. For more information,
contact your local distributor or Rockwell Automation representative, or visit

http://www.rockwellautomation.com/support/

.

Installation Assistance

If you experience a problem within the first 24 hours of installation, please review the
information that's contained in this manual. You can also contact a special Customer
Support number for initial help in getting your product up and running.

United States 1.440.646.3434

Outside United States Please contact your local Rockwell Automation representative for any

Monday – Friday, 8 a.m. – 5 p.m. EST

technical support issues.

New Product Satisfaction Return

Rockwell Automation tests all of its products to ensure that they are fully operational
when shipped from the manufacturing facility. However, if your product is not
functioning and needs to be returned, follow these procedures.

United States Contact your distributor. You must provide a Customer Support case number

Outside United States Please contact your local Rockwell Automation r epresentative for the return

Allen-Bradley, Rockwell Automation, ArmorBlock and TechConnect are trademarks of Rockwell Automation, Inc.

Trademarks not b elonging to Rockwell Automation are property of their respective companies.

(see phone number above to obtain one) to your distributor in order to
complete the return process.

procedure.

Publication 1732E-WD004D-EN-P - October 2015 PN-314536

Supersedes Publication 1732E-WD004C-EN-P - May 2013 Copyright © 2015 Rockwell Automation, Inc. All rights reserved. Printed in Singapore.