Allegri 11707010FR001 User Manual

MODEL 11707

ASSEMBLY AND DRESSING INSTRUCTIONS

Blending innovative desig n, cutting-edge technology and the grace and elegance of traditional crystal, ALLEGRI® proudly brings you a new approach
to lighting. ALLEGRI® fixtures are made from the finest raw materials and are brought to life through a combination of traditional manufacturing, such
as sand casting, hand-forging and techn ol ogy driven techniques including laser cut t in g.

Enclosed are detailed instructions on how to properly install your fixture. Please read al l instructions carefully. If you need further assistance, please
contact the dealer from which you purchased this product or call 800-525-2655 to speak with an ALLEGRI® customer service representative. We
hope you enjoy your fixture!

P1

WWW.ALLEGRICRYSTAL.COM

800.525.2655

ASSEMBLY AND DRESSING INSTRUCTIONS

WARNING!

CONTENTS ARE FRAGILE

HANDLE WITH CARE

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY AND

PROPERTY DAMAGE. All electrical components must be installed only by a Licensed Electrician.

THE METAL FRAME, FINISH AND CRYSTA L COMPONENTS OF THIS CHANDELIER ARE VERY DELICATE.

PLEASE EXERCISE EXTREME CAUTION DURING UNPACKING AND INSTALLATION.

PLACE ALL PIECES TOGETHER IN A NUMERICAL ORDER AND IN THE ORIENTATION DEPICTED.

REFER TO THE PARTS LIST TO AVOID ANY CO NFUSION BETWEEN PARTS THE PARTS NUMBER MUST COINCIDE.

CAUTION: Do not exceed maximum wattage note on fixture. Uses only recommended bulbs with fixture.

GENERAL NOTES

 For your safety and proper operation of fixture, read and understand all instructions completely before commencing installa tion.

 This fixture is suited for dry locations. Never install fixture on damp ceiling; room should be dry and well ventilated.
 Extreme care should be taken to avoid damage to the surface of lighting fixture and wires. Wearing gloves is recommended for installation.
 Connect ribbed wire of lighting fixture to live wire, while smooth wire of lighting to neutral. Connect bare copper or silver color ground wire of

fixture to the double colored or green wire of outlet box.

 Use UL LISTED wire nuts for the wiring connections in this fixture. Wrap wire nut connections with UL LISTED electrical tape.
 Keep lighting away from acid, alkali and other corrosive chemical or gas; clean the fixture with a clean cloth only.
 Fixture must be firmly secured when installing ceiling tube, chain pipe and other connecting parts.

 Never cover the lighting fixture when power is connected.
 Disconnect the power before installing, cleaning and/or replacing light bulb.
 Extreme care should be taken when installing and cleaning of Glass and/or Crystal Components.
 This product is rated 110-130V/60HZ bulb 40W Maximum.
 Save these instructions for future reference.

WARNING

The electricity must be turned off at the mai n fuse box or circuit bre aker before installing this fixture. T urning the power off using t he light switch may
not be sufficient to preve nt electrical shock.

*ALLEGRI will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

P2

WWW.ALLEGRICRYSTAL.COM

800.525.2655