Allegri 11706010FR001 User Manual

MODEL 11706

Blending innovative design, cutting-edge technology and the grace and eleganc e of traditional crystal, AL LE GRI® proudly br ings you a new appr oac h
to lighting. A LLE GRI® fixtur es ar e m ade from the fines t raw materials and are brought to life through a c om bination of traditional manufacturing, such
as sand cast ing, hand-fo r ging and technology driven tec hniques including laser cut ting.

Enclosed are detailed ins tructions on how to properly in s tall your fixture. Please rea d all instructions carefully . I f you need further assistance, please
contact the dealer from whic h you purchased this product or c all 866-520- 2665 to speak with an ALLEGRI® cus tomer servic e repr esentative. We hope
you enjoy your fixture!

ASSEMBLY AND DRESSING INSTRUCTIONS

WWW.ALLEGRICRYSTAL.COM

866.820.2665

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY AND
PROPERTY DAMAGE. All electrical components must be installed only by a Licensed Electrician.
This product must be installed in accordance with the National Electric Code (NEC), and appropriate local electrical code(s), by a
person familiar with the construction and operation of the product and the hazard involved.*

CAUTION: Do not exceed maximum wattage note on fixture. Uses only recommended bulbs with fixture.



For your safety and proper operat i on of fix tur e, read and underst and all instr uct i ons co mplet el y before commencing installation.



This fixture is suited for dry locations. Never install fixture on damp ceiling; room should be dry and well ventilated.



Extreme care should be taken to avoid damage to the surfac e of lighting fixture and wires. Wearing gloves i s rec ommended for installation.



Connect ribbed wire of lighting fixture to live wire, while smooth wire of li ght in g to neut ral. Connect bare copper or silver color ground wire of
fixture to the double colored or gre en wire of out let box .



Use UL LISTED wire nuts for the wiri ng connec tions in this fixture. Wrap wire nut conne ct io ns with UL LISTED electrical tape.



Keep lighting away from acid, alkali and othe r corrosive chemical or gas; clean the fixture with a clean clot h onl y.



Fixture must be firmly sec ured when installing ceiling tube, cha in pipe and other connecting parts.



Never cover the lighting fixture when power is connected.



Disconnect the power befor e installing, cleaning and/or repla cing l ight bulb.



Extreme care should be taken when installing and cleaning of Glass and/or Crystal Components.



This product is rated 110-130V/60HZ bulb 40W Maximum.



Save these instructions for future reference.

T

he electricity must be turn ed off at the m ain fuse b ox or c ircuit br eake r befor e install ing this fixtu re. Tu rning t he po wer off using the light switch may

not be sufficient to prevent elect rical shock.

*ALLEGRI will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.

WWW.ALLEGRICRYSTAL.COM

866.820.2665