Allegri 11671022FR001 User Manual

11671-022-FR001 Bedford 1-Light Sconce

Customer Service :[phone],[phone],[e-mail]
WARMING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electricalwiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a coltage detector to verify that
the power is off.

3.DO NOT install bulb which exxeeds the maximum wattge specified on the socket label.

Step 1. Place mount mounting and wiring steps before

glass tray installation step

Step 2. Attach copper plate plate on back side of

lamp body using shell knob and threased rod.
Repeat for the glass or alabasther plates.

Step 3.

Lnstall candelabra bulbs,do not use
bulbs that exceeds 60W

Glass tray

LAMP BOD Y

60W BULBS

LAMP BODY

11671-022-FR001 Bedford 1-Light Sconce

Customer Service :[phone],[phone],[e-mail]

Step 4. Fasten 2 (state specification of screw )

into mounting plate so that they extend
away from wall when mounting plate is
installed

ELECTRICAL BOX
MOUNTING BLOCK

FLAT SCREW

Step 5. Attach the mounting plate to outlet box

with sorews

Step 6. Refer to wiring diagram.

Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the

backplate with the mounting screw on
the crossbar.Secure fixture with shell
hnobs.

Fixture bla c k an d white wires

Change to blac k an d white

UND

GRO

SERWI

LAMP BODY

T)SCENANDENC (IKETSOC

Black & white supply wires

RESSE WIHOU