Allegri 11661010FR001 User Manual

esAs
mbly & Installati
ton Ins
ructions f
11661 Millieu Metro 2-Light Wall Sconce
Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com
WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:
1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than one person may be necessary to install fixture ,make sure you have enough qualified help.
2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that the power is off.
e AssemblyFixtur
Step 1. Place mount mounting and wiring steps before
crystal installation step
Step 2. Assemble crystal to the lamp body as shown,Align holes in crystal with holes in fixture and secure crystal to fixture using headless screw
LAMP BODY
r:o
Step 3.
Install candelabra bulbs bulb,do not use bulbs that exceeds 40W
CRYSTAL
esAs
mbly & Installati
11661 Millieu Metro 2-Light Wall Sconce
Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com
Fixtur
e Assembly
Step 4. Fasten 2 (state specification of screw ) into mounting plate so that they extend away from wall when mounting plate is installed
ton Ins
ructions f
ELECTRICAL BOX
MOUNTING BLOCK
L
N
LAMP BODY
r:o
Step 5. Attach the mounting plate to outlet box with screws
Step 6. Refer to wiring diagram. Splice the ribbed side of fixture cord to the white supply wire from outlet box with wire connector. Splice the smooth side of the fixture cord to black supply wire from outlet box with wire connector
Step 7. Carefully tuck in all wires Attach the back plate with the mounting screw on the crossbar.Secure fixture with shell knobs.
SOC
Fixture black and white wires
KET
DECORATIVE NUTS
G
ANDE
NC ( I
T) SCEN
Black & white supply wires
RESSE WIHOU
Change to black and white
UND
GRO
ERWI
S
Loading...