Allegri 11272010FR001 User Manual

11272 Bedford 2-Light Wall Sconce

Customer Service :[phone],[phone],[e-mail]
WARNING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electrical wiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a voltage detector to verify that
the power is off.

3.DO NOT install bulb which exceeds the maximum wattage specified on the socket label.

e AssemblyFixtur

Step 1. Place mount mounting and wiring steps before

crystal installation step

Step 2. Assemble crystal shade to the lamp body

as shown,Align holes in crystal shade with holes in
fixture and secure crystal shade to fixture using
headless screw

r:oructions fton Insmbly & InstallatiesAs

Step 3. Install G9 bulbs bulb,do not use
bulbs that exceeds 40W

LAMP BODY

40W BULBS

LAMP BODY

Metal frame

11272 Bedford 2-Light Wall Sconce

Customer Service :[phone],[phone],[e-mail]

Fixtur

e Assembly

r:oructions fton Insmbly & InstallatiesAs

Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 5. Attach the mounting plate to outlet box
with screws

Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 7. Carefully tuck in all wires Attach the
back plate with the mounting screw on
the crossbar.Secure fixture with shell
knobs.

SOC

KET

ELECTRICAL BOX

MOUNTING BLOCK

LAMP BODY

Screw

ANDE

NC (I

T) SCEN

Black & white supply wires

RESSE WIHOU

Fixture bla c k and white wires

Change to black and white

UNDGRO

SERWI