esAs
mbly & Installati
ton Ins
ructions f
10490-016-FR000
Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com
WARMING - TO REDUCE THE RISK OF FIRE OR INJURY:
1.lf you are unfamiliar with electricalwiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.
2.Turn off the power to the fixture's circuit at the service panel. Use a coltage detector to verify that
the power is off.
3.DO NOT install bulb which exceeds the maximum wattge specified on the socket label.
e AssemblyFixtur
Step 1. Place mount mounting and wiring steps before
crystal installation step
Step 2. Assemble crystal bowl to the lamp body
as shown,Align holes in crystal bowl with holes in
fixture and secure crystal bowl to fixture using
headless screw
Glass tray
r:o
Step 3.
Lnstall candelabra bulbs bulb,do not use
bulbs that exceeds 40W
LAMP BODY
40W BULBS
MAIN FIXTURE
esAs
mbly & Installati
10490-016-FR000
Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com
Fixtur
e Assembly
ton Ins
ructions f
r:o
ATTENTION
1. Take all crystal or glass parts carefully
from carton, then put them on a clean
cloth.
2. Start hanging crystals from bottom center
to top of fixture in an alphabetical order
as shown in diagram
Quantity
Code
A 3
B 5
C 5
D 14
E 1
A
B
C
D
A
K1080/18#,1PC
(Clarity)
K911/63#,1PC
(Fleet gold)
B
K1080/18#,2PCS
(Clarity)
K911/89#,1PC
(Fleet gold)
K1080/18#,6Pcs
(Clarity)
K911/76#,1PC
(Clarity)
C
K1080/18#,3Pcs(Clarity)
K911/76#,1PC
(Fleet gold)
E
K1080/18#,5PCS
(Clarity)
K911/63#,1PC
(Clarity)
D
E
esAs
mbly & Installati
10490-016-FR000
Customer Service :(702)361-4345,(800)525-2655,customer.service@kalco.com
Fixtur
e Assembly
Step 4. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed
Step 5. Attach the mounting plate to outlet box
with sorews
ton Ins
ructions f
ELECTRICAL BOX
MOUNTING BLOCK
r:o
Step 6. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector
Step 7. Carefully tuck in all wires Attach the
backplate with the mounting screw on
the crossbar.Secure fixture with shell
hnobs.
SOC
Fixture black and white wires
Change to black and white
KET
L
N
G
ANDE
NC (I
T) SCEN
DECORATIVE NUTS
LAMP BODY
8
" screw
32
Black & white supply wires
RESSE WIHOU
GRO
UND
ERWI
S
Loading...