Allegri 035233046FR001 User Manual

esAs

mbly & Installati

ton Ins

ructions f

035233-046-FR001 3-Light Wall lamp

Customer Service :[phone],[phone],[e-mail]
WARMING - TO REDUCE THE RISK OF FIRE OR INJURY:

1.lf you are unfamiliar with electricalwiring, call a qualified electrician to install this unit .More than
one person may be necessary to install fixture ,make sure you have enough qualified help.

2.Turn off the power to the fixture's circuit at the service panel. Use a coltage detector to verify that
the power is off.

3.DO NOT install bulb which exxeeds the maximum wattge specified on the socket label.

Fixture Assembly

Step 1. Place mount mounting and wiring steps before
crystal installation step

Step 2. Assemble crystal tray to the lamp body
as shown,Align holes in crystal tray with holes in
fixture and secure crystal tray to fixture using
headless screw

r:o

Step 3. Fix part Crystal tray to part Lamp body
by using Flat screw .

Step 4. Lnstall G9 base bulb,do not use

bulbs that exceeds LED/3W

Crystal tray

socket ring

Lamp body

LED/3W

esAs

mbly & Installati

035233-046-FR001 3-Light Wall lamp

Customer Service :[phone],[phone],[e-mail]

Fixtur

e Assembly

ton Ins

ructions f

r:o

Step 5. Fasten 2 (state specification of screw )
into mounting plate so that they extend
away from wall when mounting plate is
installed

Step 6. Attach the mounting plate to outlet box
with sorews

Step 7. Refer to wiring diagram.
Splice the ribbed side of fixture cord
to the white supply wire from outlet box
with wire connector. Splice the smooth
side of the fixture cord to black supply
wire from outlet box with wire connector

Step 8. Carefully tuck in all wires Attach the
backplate with the mounting screw on
the crossbar.Secure fixture with shell
hnobs.

Electrical box

Wall plugs

Mounting block

FLAT SCREW

Tapping screw

L

8

" screw

32

N

G

LAMP BODY

SOC

Fixture black and white wires

Change to black and white

UND

GRO

ERWI

S

KET

ANDE

NC (I

T) SCEN

Black & white supply wires

RESSE WIHOU